HOW MUCH DOES IT COST TO BUILD A 800HP+ CAPABLE BMW ENGINE?
Жүктеу.....
Пікірлер: 88
@AJFLACO2 жыл бұрын
I've been following this build for a little bit now. I've got an e46 wagon that I put a lot of work into, Rebuilt m54b30 every maintenance item, chassis reinforcement, poly bushings every single alignment item you could thing of etc etc. next is turbocharging and I have a spare m52b28 that I planned to build over time to be my high horsepower motor later on. Your build is helpful to know what I can do with the m52 iron block when I do come around to putting that motor in. Keep going man and I love this series!
@hellrotgarage
2 жыл бұрын
Thanks man!
@adventureswithsteph5352 Жыл бұрын
Hell yeah man you keep coming with the great content, we’ll keep watching!
@zackebree Жыл бұрын
You deserve a few more 0’s to that subscriber number. Always appreciate your videos. Keep killing it brother 👊🏽💯
@agdwhite54212 жыл бұрын
I have a list that i would like to buy anyday, with cx Racing kit turbo, reinforced clutch kit, fuel pump, injectors, tune, decompression plate, arp studs, etc etc, basically all you need, 5200€ all done by myself except the tune, my engine is a m52tub28 (around 6000$) you made it really cheap!! Congrats, your car is amazing
@tanejensen59328 ай бұрын
I’ve got a e46 328i sedan I’m wanting to turbo/manual swap this vid is awesome thanks bro!
@zigzach83302 жыл бұрын
Really stoked about those H-bean rods. I’ve got a few cans in the pantry
@hellrotgarage
2 жыл бұрын
😂😂
@tweedjohnny8740 Жыл бұрын
I just found your channel today and I subscribed. I'm loving the content. I have a crazy favor to ask, could you please do a vion installation of auto meter electrical oil Guage. There is not 1 video on this subject except for a few idiots that couldn't teach a monkey to eat a banana! Anything you could do to help would be greatly appreciated.
@tristanharpur5485 Жыл бұрын
Where did you get the forged rods and Pistons? Looking a set for my M54B30 build.
@momo_drives Жыл бұрын
Whats needed inside the engine if I'm looking for 450whp? I know stock can go 400 reliably but I like to overkill things a little to make sure reliability is always there. Planning to match the turbo setup you have going in your current build series! I have a 330ci
@tonystark3655
Жыл бұрын
450whp should be fine just make sure to run E85 with a flex fuel kit
@wawiairsoft2 жыл бұрын
Good stuff, very informative.
@hellrotgarage
2 жыл бұрын
Thanks!
@jamesacottdavies58262 жыл бұрын
Very tempted to do this to my e60
@ricky_ricardo Жыл бұрын
Thanks for the video fellow e46 clapper
@zbene952 жыл бұрын
Nice video man 👍
@hellrotgarage
2 жыл бұрын
Thanks a lot!
@Tangledbawlz2 жыл бұрын
Thank you for the information!!! I want to do this to my E46 too, but having it be reliable.
@hellrotgarage
2 жыл бұрын
No problem!
@kylep3759
Жыл бұрын
The e46 will never be reliable. Not even stock. Well maybe it’ll be reliable for 1 year after all proper maintenance is done at one time and all the plastic in the cooling system is replaced to aluminum parts that cost 3x as much. Then you get a fucking oil pan leak, and then you have to change all the gaskets AGAIN and then your fuel pump goes and your power seats don’t work AGAIN and then your rear struts give out because they are shit, so you spend $1800 on a cool coilover setup because you think your hot shit and those only last 2 fucking years, then the headliner tears away and the center console flops over to shit and then you die.
@cristiansoto82842 жыл бұрын
What setting do you have for safety how much power ?
@mihaiparghie1397 Жыл бұрын
Hi. How did you relocate icv for this intake manifold ?
@_mrklein2 жыл бұрын
we need a pov of this monster!
@hellrotgarage
2 жыл бұрын
There are a few on the channel already! I have one reel of 25psi, and some videos on over 15psi. Once I go back to e85 ill turn it up!
@ehabalrmili88483 ай бұрын
Hello, is it possible to start the engine with a front sensor crank?
@Vgk362 жыл бұрын
Damn 5k plus turbo setup . As much as I would love to stay Bmw. A ls3 Chevy performance crate engine (19432557 pn#) from jegs is 6k shipped BRAND NEW. Then the other tidbits and go slay. I really do love the turbo setup you have but more than anything I want to have ease of maintenance be my main driving point. Not max power . 450 to 500 is this chassis is plenty to party .
@hellrotgarage
2 жыл бұрын
Oh come on, be irresponsible and stick with the bmw way!
@Vgk36
2 жыл бұрын
@@hellrotgarage brother if I was in a better position financially I would. Tbh when the time comes I may just rering and boost the m54b30 that’s in the car for the flutter noises and leave it at like 350whp. I really need to keep ac. If it pops then I’ll sell the turbo setup and go LS … as gross as that sounds .
@danielplumley379
2 жыл бұрын
ls3 doesn't make 800hp though...
@A3jettaftw1
2 жыл бұрын
The “other tidbits” for that swap will add another 5k real quick just to not even make half the hp
@Vgk36
2 жыл бұрын
@@A3jettaftw1 you know ls3’s make 495hp STOCK right ….
@kinggjaye8122 Жыл бұрын
Subbed
@jaxhayes15572 жыл бұрын
Keep it up
@hellrotgarage
2 жыл бұрын
Yessir
@supdougs4487 Жыл бұрын
MR. BEAST!!!
@garratteguyton947910 ай бұрын
Needed some inspiration! I went with diamond 9.5 84.5, fcp x-beams in my 2.8, s52 cams, and doing a non vanos head converted to single vanos
@archivedpump27442 жыл бұрын
you should make a video of the car gettin dynoed
@donovan4009 Жыл бұрын
Very helpful! Can a m54b30 block handle 600 + whp or up to 25 psi of boost with forged internals, upgraded head gasket, head bolts, oil pump etc? Can the aluminium block take it? The goal is up to 25 psi of boost on 93 octane with low compression ratio, about 9:1. I’m building on an e60 Do you think this setup would hold up? Thnx
@NatoriousGamePlay
Жыл бұрын
Yes. There's this guy with an e39 making over 600whp on a stock block with a stock bottom end.
@ThomasBilt5 ай бұрын
Shit an s54 is 5k so thats awesome plus you built it and know exactly whats what
@cesarxmbert Жыл бұрын
what ECU are you running? sick build.
@hellrotgarage
Жыл бұрын
Stock ms43
@Renhumble2 жыл бұрын
Nice build! Total cost of 5k not even that bad considering the power, even if it was like 500hp that’d still be good. I was looking at the k64 kit for my b30, should I get their kit (cost like 4-5k, clutch everything included & stage 2) or seek each part out individually?
@hellrotgarage
2 жыл бұрын
Thats a good deal actually. Try it!
@A3jettaftw12 жыл бұрын
Helll yeah!!! Dyno vid soon?
@hellrotgarage
2 жыл бұрын
I really hope so. Lot going on
@Dresimen Жыл бұрын
Is m50b30 needed for 700hp -800hp or is possible with m54b30 ? Internals changed (M12 bolds , wiseco 9:1 pistons ARP rods, gt35 turbo , straight pipe...)
@hellrotgarage
Жыл бұрын
M54b30 just sucks because its hard to keep the head from lifting due to the weak aluminum block
@archivedpump27442 жыл бұрын
Is a 2.5l i6 worth building cause ive only seen people messing around with the 3 i6
@hellrotgarage
2 жыл бұрын
Yes a 2.5 is great
@lilbreezi1243 Жыл бұрын
What specifically do you recommend to make around 400hp reliably because I’m not trying to go overboard because it’s a daily mines only at 90,000 miles
@southernracing2468
10 ай бұрын
Just a good turbo set up and good fuel system valve springs cams and intake will help a lot too
@kadenbourgeois1 Жыл бұрын
How much with turbo?
@davesters24262 жыл бұрын
Heck yeah
@hellrotgarage
2 жыл бұрын
👍🏻
@danielrodriguez95522 жыл бұрын
Hp, and torque ?
@David0617-u4cАй бұрын
I have m54b30 engine I want to install turbo to that engine, are safe for daily or not?
@hellrotgarage
18 күн бұрын
Yes you can daily if you control yourself and keep it at 10psi
@Theoriginalmichaelmiachel2 жыл бұрын
I wish I paid $700 for all my machine work on my m52… I’m hurting
@hellrotgarage
2 жыл бұрын
Danggggg
@carterstith97832 жыл бұрын
Should I build my 3 liter b30…?
@cesarxmbert
Жыл бұрын
a 3 liter engine? just get the crankshaft if you want a 3L displacement.
@manniebanda212 Жыл бұрын
A bummer cant be a crapper dude
@plugpenguin16602 жыл бұрын
can you make reliable 500-600 with m54b30 block? or is a iron block needed?
@hellrotgarage
2 жыл бұрын
Well if you want it to be reliable I’d recommend building the m54 up. You can make a reliable 400 on an un opened m54 if you go e85.
@drewdavis2392 жыл бұрын
What size pistons ? 84 over bore .5 ?
@hellrotgarage
2 жыл бұрын
Yes .5 over stock
@drewdavis239
2 жыл бұрын
Solid lifters? Your not that far from alien engineering/ someguy325. Go get his solid lifters. Spin it to 8500. Job done! Check out his KZread channel. He's a regular contributing factor on the forums.
@drewdavis239
2 жыл бұрын
kzread.info/dash/bejne/amiTvJlyZZOwksY.html
@drewdavis239
2 жыл бұрын
I also wonder how much lower your compression is with the bigger rings in the head gasket.
@chadschmitt97982 жыл бұрын
What are the wheels?
@hellrotgarage
2 жыл бұрын
M pars from bmw
@bapesta2152 жыл бұрын
I want my e46 sedan to stay awd but I want them HP's is it possible??
@tonystark3655
2 жыл бұрын
Yeah it’s possible there’s a couple e46 xi making 800whp with stock awd drive train
@LochyP
2 жыл бұрын
@@tonystark3655 I call bs, the awd drive train is made of chocolate... do you have any links?
@tonystark3655
2 жыл бұрын
@@LochyP kzread.info/dash/bejne/k356ya-PptCyfM4.html kzread.info/dash/bejne/pHqdzbdsY5SWlag.html the first one is making well over 800whp and the second one around 700whp
Пікірлер: 88
I've been following this build for a little bit now. I've got an e46 wagon that I put a lot of work into, Rebuilt m54b30 every maintenance item, chassis reinforcement, poly bushings every single alignment item you could thing of etc etc. next is turbocharging and I have a spare m52b28 that I planned to build over time to be my high horsepower motor later on. Your build is helpful to know what I can do with the m52 iron block when I do come around to putting that motor in. Keep going man and I love this series!
@hellrotgarage
2 жыл бұрын
Thanks man!
Hell yeah man you keep coming with the great content, we’ll keep watching!
You deserve a few more 0’s to that subscriber number. Always appreciate your videos. Keep killing it brother 👊🏽💯
I have a list that i would like to buy anyday, with cx Racing kit turbo, reinforced clutch kit, fuel pump, injectors, tune, decompression plate, arp studs, etc etc, basically all you need, 5200€ all done by myself except the tune, my engine is a m52tub28 (around 6000$) you made it really cheap!! Congrats, your car is amazing
I’ve got a e46 328i sedan I’m wanting to turbo/manual swap this vid is awesome thanks bro!
Really stoked about those H-bean rods. I’ve got a few cans in the pantry
@hellrotgarage
2 жыл бұрын
😂😂
I just found your channel today and I subscribed. I'm loving the content. I have a crazy favor to ask, could you please do a vion installation of auto meter electrical oil Guage. There is not 1 video on this subject except for a few idiots that couldn't teach a monkey to eat a banana! Anything you could do to help would be greatly appreciated.
Where did you get the forged rods and Pistons? Looking a set for my M54B30 build.
Whats needed inside the engine if I'm looking for 450whp? I know stock can go 400 reliably but I like to overkill things a little to make sure reliability is always there. Planning to match the turbo setup you have going in your current build series! I have a 330ci
@tonystark3655
Жыл бұрын
450whp should be fine just make sure to run E85 with a flex fuel kit
Good stuff, very informative.
@hellrotgarage
2 жыл бұрын
Thanks!
Very tempted to do this to my e60
Thanks for the video fellow e46 clapper
Nice video man 👍
@hellrotgarage
2 жыл бұрын
Thanks a lot!
Thank you for the information!!! I want to do this to my E46 too, but having it be reliable.
@hellrotgarage
2 жыл бұрын
No problem!
@kylep3759
Жыл бұрын
The e46 will never be reliable. Not even stock. Well maybe it’ll be reliable for 1 year after all proper maintenance is done at one time and all the plastic in the cooling system is replaced to aluminum parts that cost 3x as much. Then you get a fucking oil pan leak, and then you have to change all the gaskets AGAIN and then your fuel pump goes and your power seats don’t work AGAIN and then your rear struts give out because they are shit, so you spend $1800 on a cool coilover setup because you think your hot shit and those only last 2 fucking years, then the headliner tears away and the center console flops over to shit and then you die.
What setting do you have for safety how much power ?
Hi. How did you relocate icv for this intake manifold ?
we need a pov of this monster!
@hellrotgarage
2 жыл бұрын
There are a few on the channel already! I have one reel of 25psi, and some videos on over 15psi. Once I go back to e85 ill turn it up!
Hello, is it possible to start the engine with a front sensor crank?
Damn 5k plus turbo setup . As much as I would love to stay Bmw. A ls3 Chevy performance crate engine (19432557 pn#) from jegs is 6k shipped BRAND NEW. Then the other tidbits and go slay. I really do love the turbo setup you have but more than anything I want to have ease of maintenance be my main driving point. Not max power . 450 to 500 is this chassis is plenty to party .
@hellrotgarage
2 жыл бұрын
Oh come on, be irresponsible and stick with the bmw way!
@Vgk36
2 жыл бұрын
@@hellrotgarage brother if I was in a better position financially I would. Tbh when the time comes I may just rering and boost the m54b30 that’s in the car for the flutter noises and leave it at like 350whp. I really need to keep ac. If it pops then I’ll sell the turbo setup and go LS … as gross as that sounds .
@danielplumley379
2 жыл бұрын
ls3 doesn't make 800hp though...
@A3jettaftw1
2 жыл бұрын
The “other tidbits” for that swap will add another 5k real quick just to not even make half the hp
@Vgk36
2 жыл бұрын
@@A3jettaftw1 you know ls3’s make 495hp STOCK right ….
Subbed
Keep it up
@hellrotgarage
2 жыл бұрын
Yessir
MR. BEAST!!!
Needed some inspiration! I went with diamond 9.5 84.5, fcp x-beams in my 2.8, s52 cams, and doing a non vanos head converted to single vanos
you should make a video of the car gettin dynoed
Very helpful! Can a m54b30 block handle 600 + whp or up to 25 psi of boost with forged internals, upgraded head gasket, head bolts, oil pump etc? Can the aluminium block take it? The goal is up to 25 psi of boost on 93 octane with low compression ratio, about 9:1. I’m building on an e60 Do you think this setup would hold up? Thnx
@NatoriousGamePlay
Жыл бұрын
Yes. There's this guy with an e39 making over 600whp on a stock block with a stock bottom end.
Shit an s54 is 5k so thats awesome plus you built it and know exactly whats what
what ECU are you running? sick build.
@hellrotgarage
Жыл бұрын
Stock ms43
Nice build! Total cost of 5k not even that bad considering the power, even if it was like 500hp that’d still be good. I was looking at the k64 kit for my b30, should I get their kit (cost like 4-5k, clutch everything included & stage 2) or seek each part out individually?
@hellrotgarage
2 жыл бұрын
Thats a good deal actually. Try it!
Helll yeah!!! Dyno vid soon?
@hellrotgarage
2 жыл бұрын
I really hope so. Lot going on
Is m50b30 needed for 700hp -800hp or is possible with m54b30 ? Internals changed (M12 bolds , wiseco 9:1 pistons ARP rods, gt35 turbo , straight pipe...)
@hellrotgarage
Жыл бұрын
M54b30 just sucks because its hard to keep the head from lifting due to the weak aluminum block
Is a 2.5l i6 worth building cause ive only seen people messing around with the 3 i6
@hellrotgarage
2 жыл бұрын
Yes a 2.5 is great
What specifically do you recommend to make around 400hp reliably because I’m not trying to go overboard because it’s a daily mines only at 90,000 miles
@southernracing2468
10 ай бұрын
Just a good turbo set up and good fuel system valve springs cams and intake will help a lot too
How much with turbo?
Heck yeah
@hellrotgarage
2 жыл бұрын
👍🏻
Hp, and torque ?
I have m54b30 engine I want to install turbo to that engine, are safe for daily or not?
@hellrotgarage
18 күн бұрын
Yes you can daily if you control yourself and keep it at 10psi
I wish I paid $700 for all my machine work on my m52… I’m hurting
@hellrotgarage
2 жыл бұрын
Danggggg
Should I build my 3 liter b30…?
@cesarxmbert
Жыл бұрын
a 3 liter engine? just get the crankshaft if you want a 3L displacement.
A bummer cant be a crapper dude
can you make reliable 500-600 with m54b30 block? or is a iron block needed?
@hellrotgarage
2 жыл бұрын
Well if you want it to be reliable I’d recommend building the m54 up. You can make a reliable 400 on an un opened m54 if you go e85.
What size pistons ? 84 over bore .5 ?
@hellrotgarage
2 жыл бұрын
Yes .5 over stock
@drewdavis239
2 жыл бұрын
Solid lifters? Your not that far from alien engineering/ someguy325. Go get his solid lifters. Spin it to 8500. Job done! Check out his KZread channel. He's a regular contributing factor on the forums.
@drewdavis239
2 жыл бұрын
kzread.info/dash/bejne/amiTvJlyZZOwksY.html
@drewdavis239
2 жыл бұрын
I also wonder how much lower your compression is with the bigger rings in the head gasket.
What are the wheels?
@hellrotgarage
2 жыл бұрын
M pars from bmw
I want my e46 sedan to stay awd but I want them HP's is it possible??
@tonystark3655
2 жыл бұрын
Yeah it’s possible there’s a couple e46 xi making 800whp with stock awd drive train
@LochyP
2 жыл бұрын
@@tonystark3655 I call bs, the awd drive train is made of chocolate... do you have any links?
@tonystark3655
2 жыл бұрын
@@LochyP kzread.info/dash/bejne/k356ya-PptCyfM4.html kzread.info/dash/bejne/pHqdzbdsY5SWlag.html the first one is making well over 800whp and the second one around 700whp
So is this an engine swapped car?
@hellrotgarage
2 жыл бұрын
M52 from an e36
In Ukraine boring will be cost 50-60$😅
FIRST
Spoiler alert: its actually not cheap
@toastypoptart6953
Жыл бұрын
For 800hp thats a cheap build😂