I noticed it builds boost on neutral instantly from throttle pressed, būt falls holding the limiter. So what if you from standstill mash gas and lauch as it's with boost?

@porschelover04

2 жыл бұрын

Any engine will do that. It's simply the load from having the rev up the engine building exhaust gasses, which builds boost. Once you're pinging off the limiter, there's no longer load on the engine and it drops off. Your solution is possible, but difficult due to how quickly the engine revs. If there was a heavy-duty flywheel option, you could have better control over when to let go of the throttle and build more boost since the engine is under load for longer.

@satsumagt5284

2 жыл бұрын

All he had to do, was use the 2 step

@coffelt683

2 жыл бұрын

@@SneakyMrWiggles No if you follow drag racing, 2-step is specifically for setting a a psi and rpm you want to launch at. Anti-lag is what rally cars use to keep up boost in between shifts and upon deacceleration. You can set any aftermarket ecu to tune what psi your turbos hold with the 2-step on.

@Blitz_Protogen

2 жыл бұрын

@@satsumagt5284 for me at least, the 2 step doesnt fully work as intended because most cars wont hold boost and idk why

@tobster786

2 жыл бұрын

@@Blitz_Protogen 2 step in beamng is only a lower rev limiter that doesnt build boost

Witt the ultra heavy duty, It runs 1800hp and the internals are fine. Problem is it overheats extremely fast. You can still get a reliable 1450, and get around 280mph

@jwalster9412

2 жыл бұрын

I built a 1500hp RWD version, I think the amount of power is just obove the limit of a drivable car, but in the right hands it can be really really fast.

@noahleeman2715

2 жыл бұрын

you can also go over 300mph if you put nos bottles with 250kwh shot sizes, basically making it the only way to go 300 with no mods easily.

@finlaymcdiarmid5832

2 жыл бұрын

It overheats extremely suddenly at about 325-340mph, goes from being normal temp to melting the engine in a click. Seems like a oversight/bug/glitch that unless you are deliberately burning out the clutch and engine that nothing will happen until those ridiculous speeds with that power.

@camarokidbb4347

2 жыл бұрын

@@finlaymcdiarmid5832 I’ve built my Scintilla to reach 344 MPH, and all it took was 500kw of nitrous boost from two bottles, a maxxed out engine, the best radiators (don’t ignore them!), and removing every panel except for the windshield, rollcage, and rear canopy to at least make it seem realistically drivable. The less weight, the less the engine has to work in order to reach ridiculous speeds.

@finlaymcdiarmid5832

2 жыл бұрын

@@camarokidbb4347 i got to 345 but engine immediately melted... i can get to 335 just about without melting the engine, by the way the lightweight windshield is lighter than having none for some reason, might be a glitch.

Initial reaction to the new car: looks awesome. Fully built with 39 lbs of boost and a 500KW shot of N2O, it breaks.

@billbergen9169

2 жыл бұрын

Not STRONK enough

@alphenhousplaysgames4565

2 жыл бұрын

with the ultra heavy duty block?

@joespeed1952

2 жыл бұрын

@@alphenhousplaysgames4565 yup. Even with the strongest block

@isatntt

2 жыл бұрын

by the way, stage 1/2/3 performance blocks are for rpm and ultra heavy duty blocks are for torque (i think) so if your engine has a lot of torque and low rpm, its best to use the heavy duty block

@alphenhousplaysgames4565

2 жыл бұрын

@@joespeed1952 i am literally using that build rn. it DOES break. after it takes a long long time due to it reaching the said speed needed to break.

Love that you threw in the diesel. The new stage 3 block is my favorite part catalogue change in the new update as it allows the 6.0 to finally make good diesel power and more importantly torque under high boost when before it was... nothing crazy to behold

@jwalster9412

2 жыл бұрын

someone was crazy enough to make a V10 diesel engine mod for this.

@MrCasebi

2 жыл бұрын

@@jwalster9412 looks like I have a mod to test out

I like how the engine just says "nope, ain't happening" then blows up😂

its neat test but i think its done the wrong way, its not really the boost thats the issue its the torque, Stock v10 will explode if it runs 700lb-ft torque to long, even at 10psi boost with nos, but with ultraheavy duty engine block, it can happily handle 36psi boost of all day, but will explode at 1600lb-ft torque

@PizzaPowerXYZ

2 жыл бұрын

What? I got 500kw nos with ultraheavy duty at 2400hp just fine I don't remember the ftlb but it was nowhere near exploding

@THESLlCK

2 жыл бұрын

@@PizzaPowerXYZ you probably activated it later in the powerband. Toby here doesn't know what he's doing lol

@jwalster9412

2 жыл бұрын

no NoS, AWD and 1500Hp is somewhat usable in a racing situation.

@jwalster9412

2 жыл бұрын

​@@PizzaPowerXYZ with that amount of power you get close to 400KMH, but the engine block becomes hotter than your m--

@Giuliana-w1f

2 жыл бұрын

exactly, this test should be done with better tires and awd

This car blowing up like a Honda civics with 1000lbs of boost

@racer927

2 жыл бұрын

That's not surprising. Supercar engines are very precisely tuned to get the most out of the mechanical and structural limits of their components so any additional torque would easily exceed those tolerances. Something like a standard Covet or Pessima can handle a lot of additional power and torque within reason because their engines are tuned down for economy.

@saddoge2085

2 жыл бұрын

@@racer927 oh ok thanks.

@jwalster9412

2 жыл бұрын

​@@racer927 unless you put a heavy duty block in them.

conclusions: the better sound you have the faster you go.

@goldendlolig8237

2 жыл бұрын

Nope lol

@clickbaitpolice1750

2 жыл бұрын

Tesla: hold my battery

@cesco66

2 жыл бұрын

@@goldendlolig8237 i was joking bro☠️

@McBeamer94

2 жыл бұрын

@@clickbaitpolice1750 Nope, too heavy to hold it. I'd much rather have a jerry can of gas, please. 😜

@clickbaitpolice1750

2 жыл бұрын

@@McBeamer94 a single battery cell weighs more than a jerry can? Bc

that torque curve though

I actually tried the diesel in the off-road version of the Scintilla with 75 psi of boost and it seems to happily take that much without a problem

@Giuliana-w1f

2 жыл бұрын

this is the stock block

I made a diesel race car config, with the most boost possible without nitro, 5.2 bar! Sounds like a semi truck turbo.

Damn bro faster than a demon with that 8.3, nearly a whole second faster and its only a supercar.

I was expecting the V8 to be a brand new V8 addition to the Beam, but it's the old iron from all the older models lol :D

@besserkaufen8373

2 жыл бұрын

Yeah, thats what it even says on the description of the V8 model- they have a backstory for it hahah

Use the heavy duty blocks too, the Diesel V8 takes around 70lbs of boost!!!

can you put another velocimeter, smaller than the normal one but with km/h?

I like the sound of this car

Would be nice to see rhe numbers - the graph top left is too small to see on some devices

Beautiful car

you should make a playlist for all the vids u made testing max boost a car can take

What are you using for the power readout? Best I've been able to find is the engine debug but I'd prefer something like that

@ForgottenMustard

2 жыл бұрын

engine dyno

The 5.5 v8 looks like the 4.6l v8 that’s in the crown vics

sheeesh

by the time beamng updates hit 1.0 my grand kids will have grand kids

honestly I'm amazed just how well it drives with as much weight reduction as possible, woth 1500Hp, and AWD.

@finlaymcdiarmid5832

2 жыл бұрын

To be honest though the lightest ive gotten it was about 1150kg with the essentials, i think the base model starts out at 1450kg so you can't really lighten it that much, but that makes sense since its a supercar. you can get some ridiculous quartermiles at like 225mph with a horrendous launch and unoptimised gearing.

bro my diesel truck in this game has a 77 psi turbo LOL (ok maybe its upgraded but still)(even tho it never died :)

What are your recording settings?

Gorgeous car tha I would see every day on my city, but I only can see SUV's Oh Lord 😭

What is the widget you’re using for the power? I’ve been trying to find something like this for years

@user-lh2ey8uw1b

2 жыл бұрын

You talking about power/torque vidget? Somewhere in UI apps, it's a stock feature.

@rainer871

2 жыл бұрын

Its torque curve in UI apps

1:13 OH NO!

pls make a guide for modding turbos

Just saying that it can do wheelies with a maxed out 5.5 V8. Think it doesn’t work with the V10 because torque and stuff

@zevi2000

2 жыл бұрын

I’ve gotten wheelies with the V10 no issues

The v10 needs to be modded to make a stupid fast time like the junkyard one

@zevi2000

2 жыл бұрын

He should have used heavy duty block it will take a lot more

@tobiaskicko8192

2 жыл бұрын

rk engines have this V10

Try testing boost on civetta bolide

@jwalster9412

2 жыл бұрын

someone should add the option to swap a scintilla engine Ito the bolide.

@gmereqpl

2 жыл бұрын

@@jwalster9412 theres a mod that lets you swap any engine into nearly any car i dont remember the name

@jwalster9412

2 жыл бұрын

@@gmereqpl it's probably outdated at this point, I.e it doesn't work anymore.

@gmereqpl

2 жыл бұрын

@@jwalster9412 it worked on 0.23 so im sure they still update it

@noahater5785

2 жыл бұрын

I don’t think it’s a good idea, I tried that and the Bolide is literally uncontrollable due to lacking AWD

Just goes to show how much boost diesels can take. Strongly built components.

@braxtonwilkerson6165

2 жыл бұрын

The components have to be stronger as Diesel is compressed much more than gasoline and the block has to contain all that pressure.

@youi511

2 жыл бұрын

Yeah, diesels usually run about double the compression of a petrol engine, a lot of reinforcement is required to ensure it don't blow up

you do know that ultra heavy duty can take a lot more boost and torque than performance block?

i don't know much about the mechanics of cars so correct me if i'm wrong, but i think bng is a bit unrealistic in how much pressure the engine can handle, because here in brazil we casually put 22 to 50 psi on 2.0 engines without a lot of preparation for street racing

@Rose_McLovin

2 жыл бұрын

ps: sorry for bad english

@afoxwithahat7846

2 жыл бұрын

50 Psi num motor de 5 litros seria muita coisa, e o motor provavelmente foi feito para ser o mais leve possível e ser usado uma vez ou outra. A maioria dos supercarros ficam nas garagens.

@Rose_McLovin

2 жыл бұрын

thanks for letting me know, I think there was some misunderstanding when converting the values, here we measure the turbo pressure in kg instead of psi. I'll put some cars that are common to be modified around here in case you want to see what we drive vw gol 1994 : kzread.info/dash/bejne/ZJ2F1sihZrfgprA.html vw gol 2005 : kzread.info/dash/bejne/dZqa1s6dhrDKZsY.html honda civic vti : kzread.info/dash/bejne/qHphxJN9hKu2lLw.html my dream car is a 2008 civic si turbo like this : kzread.info/dash/bejne/ppWtyauwd8mapNo.html ps: really thanks for letting me know that this was too much pressure, you probably saved me from blowing up my first car engine lol

@afoxwithahat7846

2 жыл бұрын

@@Rose_McLovin Só lembra de pesquisar quanto o motor aguenta e o que isso muda na manutenção. Boa sorte com seu carro :D

There's sport mode for the gears.

@finlaymcdiarmid5832

2 жыл бұрын

The DCT didnt work well at all for me, just locked up and trundled up slowly like a 50hp engine in a automatic dumptruck.

make the fastest drag scintilla possible please

@basheerahmed3745

2 жыл бұрын

kzread.info/dash/bejne/nX1p06twhqfZgco.html idk this looks like its the fastest

@finlaymcdiarmid5832

2 жыл бұрын

You could probably get up to 250mph. Ive gotten 225 with a terrible launch due to 1st gear ratio going up to like 150mph!

i managed to get 65psi from the diesel engine without an overtorque risk

Where is the 4.0?

Does anyone know what this car is based off irl,i wanna say c8 corvette with a european sports car back

@jwalster9412

2 жыл бұрын

it's a mix of like five or six cars, most noticeable being the lotus evija.

@xxyvng6831

2 жыл бұрын

@@jwalster9412 Yea i thought lotus too

@noahater5785

2 жыл бұрын

Not sure what the exterior is based off of, but after looking it up, the engine that it has is loosely based off the one used by the Audi R8 Spyder

@jwalster9412

2 жыл бұрын

@@noahater5785 the Audi R8 engine is actually a Lamborghini V10.

@tomsonabraham1127

2 жыл бұрын

the headlights looks like the one from the lotus evija the bodylines seem to be loosely based on the mclaren 720s and the rear looks to be based on a koenigsegg gemera with the tail lights styled off a bmw i8.That's how I see it

Can someone link the map for me please?

How can I add more PSI to the turbo????????

@noahater5785

2 жыл бұрын

That’s what the stage 3 variable boost turbo does, it allows you to adjust the boost

@Giuliana-w1f

2 жыл бұрын

in vehicle config, go to tuning

It would have been good to see a top speed

@NatanSalazar

2 жыл бұрын

you can go over 500km/h if you want to do only once but the most reliable i've found was like 430km/h

@jwalster9412

2 жыл бұрын

​@@NatanSalazar I can't get past 400 without overheating.

@NatanSalazar

2 жыл бұрын

@@jwalster9412 did you tried to use a better radiator? you can use race oil pan to help too

@jwalster9412

2 жыл бұрын

@@NatanSalazar I tried race, and at 1800HP, and max gearing, with max nos, it would only go 400 before to would overheat, I think

@NatanSalazar

2 жыл бұрын

@@jwalster9412 mine does 430 with no overheat and no nos, what engine is you using? mine is v10 5.0

The only thing i hate about the car is that the V10 sound is like the crappy V6 sound but with higher pitch.

@jwalster9412

2 жыл бұрын

atleast it sounds good, if it was a Carrera GT engine it would probably get a bit obnoxious after awhile, especially when you just want to drive it.

I go to school with this guy

@jwalster9412

2 жыл бұрын

r/that happened.

i done 540km/h with it

That V8 is so weak

How to increase psi?

@Inscription2432

2 жыл бұрын

stage 3 variable boost turbo allows you to adjust the boost

@PERTUS

2 жыл бұрын

@@Inscription2432 to mod jest?

@Inscription2432

2 жыл бұрын

@@PERTUS nie normalnie tuning w autach niektórych turbo na stage 3 variable boost turbo musi byc napisane koło stage 3

this dude never reply's i have asked how he got the onscreen hp tq grafts and it gos ignored

@ForgottenMustard

2 жыл бұрын

In the ui apps, look for torque curve and engine debug.

@tunercars3

2 жыл бұрын

@@ForgottenMustard thank you vary much

@zevi2000

2 жыл бұрын

@@tunercars3 not ignored this time lol

@tunercars3

2 жыл бұрын

@@zevi2000 right the down side is i did look it up but was unable to find it now if I could get him to show me or even make a video on where he got them that would appreciated