En la actualidad muchos hacen lo que tu hacías hace tiempo pero sigues siendo el mejor excelente trabajo

Pure respect, you're not doing tuning you're a craft artist. I'm amazed.

@sargera1

Жыл бұрын

esp on an old cars that only some millenials remember(ford prob was embarassed when xtype got disclosed using low end car parts on it) despite the car prob got a decent value

@elyoregamqulov319

10 ай бұрын

​@@sargera1Ф

Вот у тебя ручищи золотые и фантазия огромная. Восхищаюсь твоей работой.

Just incredible. From design, retrofit, engineering and execution. Unreal!

Kanalınız belki de ilk açıldığı günden beri izlerim videolarınızı. Yapıyorsunuz bu sporu, bu alanda gördüğüm en iyi işleri siz çıkarıyorsunuz. Saygılar, esenlikler.

@azccarstyle

2 жыл бұрын

Teşekkür ederim.🙏

@Yerinde_Ahsap

Жыл бұрын

@@azccarstyle usta kolay gelsin kendim mobilya cila ustasıyım ama sana cıkaraklınyapatımmyeterki öğret işi 😅 saygılar

@vukovi9353

Жыл бұрын

Merhaba Abi, merhaba kardeşim nasılsın kann ich dir meine Audi a6 Rücklichter schicken mach was schönes draus Geld zahle ich dir was du willst kein Problem Wallah Abi du bist die beste allah seni ödüllendirdi

@metehanbulut07

10 ай бұрын

@@azccarstyle golf 3 için yapıyormusunuz size nasıl ulaşacagım

Türkiye’nin değil Dünyanın en iyisisiniz helal olsun her detay titizlikle yapılmış her esnaf sizin gibi böyle titiz harika işler çıkarsa gerçekten harika.

@azccarstyle

2 жыл бұрын

teşekkür ederim.🙏

@amj76425

2 жыл бұрын

The Gospel is 1 Corinthians 15:1-4 👇 kzread.info/dash/bejne/npaWltqwic2Xaco.html🕊

Since I realized that you are from Turkey, I am proud of you. Your job is amazing. I really liked your creativty.

Realmente una belleza de trabajo, muchísimo detalle y dedicación pura a un diseño super hermoso. Felicidades y sigan adelante. Saludos desde La Paz Bolivia.

Just incredible. From design, retrofit, engineering and execution. Unreal!. Excelente trabajo, eres un maestro..

Fantastic job!! Definitely loving the design!!

Azc! You are not only an artist, you bring art to life!

I don't know anyone else who is better at this job. well done as always 👏👏

Love seeing this as there's not a lot of aftermarket support for the x-types. I've been trying to find somewhere to make clear taillights for mine but it's been so hard haha

@davidr6865

Жыл бұрын

I don’t think I have seen one on the road in about 10 years

@sargera1

Жыл бұрын

@@davidr6865 got scrapped fast on 08s , prob easier see a stype 3.0/4.0 than xtype

@Kilowattz92

Жыл бұрын

Since I bought my s type r a couple years ago i see many x types and s types around. The real hard one to find is the xk8/xkr

Es increíble el trabajo que mete en eso nuevo sub 😎 ojalá suba uno para un golcito

Damn... The🙌🏻🙌🏻🙌🏻 best customisation... Have ever seen on KZread till date... God bless you guysss👍🏻

Wow you are talented you did it better than the original people who make the lights 😮

Boa noite, sou do Brasil adoro o canal de vocês, por favor faz uma personalização num farol do vectra B. Um abraço.

Çok çok başarılı. İnşallah araç üzerindeki resimleri de paylaşırsınız.

Holy cow from California! Love your videos, but this one is outstanding! Great craftsmanship. Keep it up.

Stoplar yurtdışından ve tahminimce İngiltere yollarında Jaguar sahipleri hayranlıkla izleyecekler.

Не когда такого не видел) , спасибо что показали что-то новое. И выглядит очень красиво и органично.

@vitaliystoyanov2239

Жыл бұрын

никогда а не "не когда" ))

@zerospiel9703

Жыл бұрын

@@vitaliystoyanov2239 запятую пропустил

@user-rs1bn3uc7e

Жыл бұрын

@@vitaliystoyanov2239 умник Куев 🤣

@Pioneerlion4ik

Жыл бұрын

стиль класической тачки портить китайским колхозом

@smertvichdreng

Жыл бұрын

@@Pioneerlion4ik это следующий уровень: понять что колхоз, несмотря на все вложенные силы, все же портит стиль, а не делает что-то красивее.

I have been silently following your work for few years now. you are doing an amazing job. WIth respect to forming the plexiglass, you can use vaccum forming machine to heat and form the plexiglass. Results will be much more easy and consistent. All the best to you

@amj76425

2 жыл бұрын

The Gospel is 1 Corinthians 15:1-4 👇 kzread.info/dash/bejne/npaWltqwic2Xaco.html🕊

@user-nn1tr1zx5q

2 жыл бұрын

Какой вакуум, у них даже струбцин нет)))

@D3s71nY

2 ай бұрын

and yet still a better job than you will ever do@@user-nn1tr1zx5q

@BucurStelian

23 күн бұрын

​They do have something you don't have , respect for people and skils

That's some wicked art right there! Nice job!

Soy seguidor por muchos años y solo puedo decir ... Que son increíbles el mejor canal de modificacion de luces para vehículos. ,, Son lo máximo .. 😎👍🏻

@ernestomarreropadilla850

2 жыл бұрын

Hola Arturo, sabes de dónde es este señor, quisiera que me haga un diseño para mi carro, el no contesta los comentarios. Gracias

@remzi7412

Жыл бұрын

This man is from Turkey. TÜRKİYE 🇹🇷 🇹🇷 🇹🇷 TURKEY

isso que é um trabalho de primeira ! parabens !

@DiogenesSsouza

Жыл бұрын

Vcs são genial

These videos are amazing! I love seeing the creativity and process behind them. Can anyone tell me what the silver foil is called that's behind the diffusers for the LEDs to be mounted on, though?

@amj76425

2 жыл бұрын

The Gospel is 1 Corinthians 15:1-4 👇 kzread.info/dash/bejne/npaWltqwic2Xaco.html🕊

@EAGLINWRX

Жыл бұрын

You can probably use HVAC vent foil tape, reflective and strong adhesive. Or there’s heat shield tape for automotive engine bay usage, extreme heat resistance. Both options should be flame retardant.

@xtnuser5338

Жыл бұрын

Looks like aluminum sheet that he's cut out and bent to shape. Thin sheet of course, but thicker than foil. Foil wouldn't hold it's shape well while you're trying to mount the LEDs and everything.

@Wasabi_Tears

Жыл бұрын

@@xtnuser5338 I've got aluminium tape for going around potential light leak areas. I wonder if that would work mounted on some perspex like I see some of the " diffused light boxes" are made with.

@xtnuser5338

Жыл бұрын

@@Wasabi_Tears Maybe it would. You can buy aluminum sheet in many different alloys and many different thicknesses. In this particular video, it looks like he may have carved out little forms from wood or something, and then pressed/folded the metal around the forms to create his shapes.

Wow this is an amazing job 👏 would like to see more detail on the module did you design it?

Desde Costa Rica excelente trabajo me encanta. Muy original.saludos

Это большая работа. Надо идти и платить этому мастеру за это, а не пытаться самому))

A melhor técnica que já vi , gratidão por compartilhar seu conhecimento! Sucesso, parabéns.

@marcuslindstrand4914

Жыл бұрын

Fascinated!! Is it possible to order custom mades taillights or do you only sell parts?

Espectacular trabajo. Te felicito

That looks amazing, what a take on an old set of lights to make them look like its for a car that's just rolled off the production line

Bonsoir tes vraiment trop fort je serait vraiment curieux de voir se que tu ferait avec des phares avant et des feux arrière de Lexus IS 300 en tout cas j'adore ton travail excellent bravo 😉👌💪

@mehrdadvaissi7020

Жыл бұрын

Bonsoir mon frère les c'est quoi ça les cadres noirs ?

Hey i love you work. This build is crazy and attention to detail is on point I've tried reaching out a few times about getting my tail lights done. Is there any better way then the email on here?

@digital0785

Жыл бұрын

Still been trying to figure this out unfortunately :(

@leviisrael3752

Жыл бұрын

let us all like and reply to this threads until he he gets to see this comment maybe its drowned in the notifications

@leviisrael3752

Жыл бұрын

maybe it is a language barrier anyone who know his language can help out

@BIack-Moon

Жыл бұрын

I believe he's in turkey.

@tahatatilbal

Жыл бұрын

I don't have time to be a middleman but you guys can send a message from WhatsApp, there's a number on description. @Azc Car Style abi arkadaşlar senden hizmet almak istiyorlarmış ama iletişim kuramıyoruz diyorlar bir bak istersen

WOW! That is very unique & amazing piece of artwork! WELL DONE!

Wow guys, amazing work! Takes such an amount of effort. Wouldve stuck with a more OEM Jag design myself but still great work!

Результат конечно впечатляет, как всегда лучше любых тюнингованых фонарей, которые продаются на сайтах. А главное индивидуальность! Я бы хотел посмотреть что получится из противотуманной фары и заднего хода в заднем бампере на рено гранд сценик 3 2010г., то бесят меня стоковые.

@user-mc6ew4jo2g

Жыл бұрын

яркие светодиоды, нет охлаждения, думаю быстро перегорят и фара на помойку.

Would love to see these put into production for us x type owner's!

@poplaurentiu4148

2 жыл бұрын

Well yeah they look cool and the work was pretty good but i don't know how the car fitted with these handmade tail-lights will pass the annual MoT inspection for example because these tail-lights are not tested & approved for the car from the factory and no warranty is offered, how much they will work on the car without any electrical issues, no warranty offered for them by the crafter and nothing about how much would cost a pair (both rear lights as a set).. not even mentioning the fact that when police will stop the car fitted with such custom- lights driver might get a hefty ticket since the lights are not homologated for the car.. so overall is a great thing to watch and even though OEM might be dull for some but are still much more safer considering all aspects i mentioned (want more light ? up-grade few bulbs to top spec !)..

@Mad-Lad-Chad

Жыл бұрын

@@poplaurentiu4148 Unless you mean fitting in a different bulb type, just upgrading to a higher quality bulb isn't going to give meaningful increase in light. The light produced is going to be related to the energy consumed, and bulbs need to be of similar wattage to what they are replacing or bad things start to happen, such as things melting. I'm not sure what you mean by MoT inspection but I grew up in NY state and getting 3rd party aftermarket lights is fine (grab em real cheap off eBay), and while there are absolutely safety concerns around the quality of a light made by hand (if you don't have the skills to be confident in the work obviously don't do this) I don't see how legally this is any different.

@schwuzi

Жыл бұрын

@@Mad-Lad-Chad I can only speak for the EU but I guess it's similar for the UK. You can only install aftermarket parts that have the right certifications. Think TÜV and the like. Aftermarket lights usually have what's called an "E-number" that will refer to all the certifications. You won't pass the mandatory inspection (every 1 or 2 years depending on where you live) if you have custom parts that are untested by some governing bodies. I see some people install OEM parts for their inspection and fit the aftermarket parts afterwards again. But if you get pulled over and the cop is bored, they will check for aftermarket parts and their certifications. If you don't have the right paperwork then you're in for a bad time. Where I'm from they will take your licence plate and have the car towed. You have to pass another inspection before you get your plates back. And those inspections are very thorough. Unlike the ones you have to do regularly you can't just go to your buddies shop who will look the other way for some issues. No, those inspections are done by state officials and they will find everything wrong with your car. Along with that hassle you will get fined into oblivion. Multiple thousands of euro depending on the country.

@Mad-Lad-Chad

Жыл бұрын

@@schwuzi In the US there are actually really strict laws around what and when cops can thoroughly inspect vehicles, and that wouldn't be permissible the vast majority of times in the US. In the states I've lived in (in Kansas currently, which has 0 inspections) even when inspections were required that wasn't part of it. As long as the parts function, they didn't care about OEM vs aftermarket. There ARE exceptions like a catalytic converter, in some states these are required to have certain certifications though not all (again, Kansas don't care). There is absolutely a chance that there are other exceptions (like headlights and taillights) that I'm unaware of, but aftermarket parts as a whole don't need to be certified. I have aftermarket brake pads, tires, wheel studs, lug nuts, heck even an aftermarket oil filter cap. I guarantee you not only are those not certified in any meaningful way for inspection, they aren't inspected for certifications. Sure, brake pads are absolutely inspected to make sure they're adequate, but I've never heard of or seen anyone get failed for a certain brand of a certain part. I've also used no name chinese headlight assemblies (not bulbs, entire assemblies) with 0 issues, and again have heard nothing of that mattering. Brief searching has turned up 0 results for me as well though again, I'm talking about US specifically. If the UK will fail you for having headlights that don't match a list of certified brands yeesh, glad I'm not there.

@schwuzi

Жыл бұрын

@@Mad-Lad-Chad That sounds so nice. Our laws in Europe are way more strict on that matter. Aftermarket parts like brake pads, discs, bulbs, etc. are not regulated here either. Just things like shocks, springs, exhausts, lights and stuff like that.

I can't believe how good this actually is!

Parabéns vc e um artista 👏

Bravo Ahmet abi ve ortağına süper olmuş video başında dedim kendi kendime parklar selamlamali olsa süper oldu diye video sonun oda oldu :) elinize sağlık 0101 hattan yazdım ama dönen olmadı :(

@richardmuirhead5428

2 жыл бұрын

I know right

@juliuscristiancen256

Жыл бұрын

@@richardmuirhead5428 l

👍..... Эт просто крутяк.....супер

Awesome looking lights. If my Alfa Romeo 156 2.0TS was still on the road I would send you a set of rear lights to customise.

Awesome!!! Do you guys know what temperature the plexiglass had to reach before it became moldable?

This was an excellent video, the way you lay out the process in your videos makes it easy to follow along and understand to duplicate! Each video I watch you are constantly evolving with different ideas, SALUTE! I have had a specific set of taillights that I have been afraid to tackle, but every time I watch one of your videos, my confidence grows….. THANK YOU AND SALUTE to you and your team for bringing us these great videos, KEEP IT UP!

@azccarstyle

2 жыл бұрын

The comments of nice friends like you improve me more. Glad if I could help. Take care of yourselves.

@dystopiancreator2618

2 жыл бұрын

@@azccarstyle do you take orders?

@lucifermorningstar802

2 жыл бұрын

@@azccarstyle merhaba, 1996 Opel Corsa B için bu tür bir far üretmenin bana ne kadara mal olacağını bilmek istiyorum, lütfen Fransa'da yaşıyorum ve elbette ülkeme göndermeniz mümkünse. İşinizi içtenlikle seviyorum ve böyle bir deniz fenerine sahip olmayı hayal ediyorum ve benim için bunu nasıl yapacağını bilen tek kişi sizsiniz. umarım bana cevap verirsin

Que trabalho lindo..., Gostaria muito de um trabalho assim na minha lanterna... Parabéns 👏👏

@ALN-bn9hu

2 жыл бұрын

Pô ele tinha que bota no carro pra vê como iria ficar

Mate that was bloody awesome 😎🤙🤙🤙🤙Thanks heaps for sharing, always great to get some new inspiration 🙏🙏🇦🇺

Eline sağlık . Yine harika olmuş 👏👏

Круто

Her defasında daha napacak diyorum ama her videoda vay be dedirtiyorsunuz Muazzam 👍

This is one of the coolest videos I’ve watched in a long time man. Awesome work. And I now want to start ripping tail lights apart haha! But dude, PLEASE put on a respirator or dust mask of some kind when you’re cutting that plexiglass! 😶‍🌫️😵☹️

Pure respect guys, amazing job!!!

Maşallah eline sağlık. Daha çok video bekliyoruz

amazing work, work of art, and eng. 👌🙌 as a mech eng I loved this so much :D . thanks for sharing this with us.

Helal olsun ellerine sağlık her seferinde üzerine koyuyorsunuz inşallah ilerde seri üretim de yaparsin

@azccarstyle

2 жыл бұрын

amin inşallah.

Maşallah 🧿 güzel işçilik bereketli olsun reis

Great result. Such a lot of work. Respect.

Kanala ilk defa denk geldim gerçekten çok başarılı eline emeğine sağlık başarılarının devamını dilerim

I have no words , mind blowing awesome i really appreciate your work ❤️🔥

Aldığı parayı sonuna kadar hak edenlerde bugün.İzlerken benim gözlerim kamaştı be o nasıl bir ışıktır helal olsun.

harika olmuş ellerinize sağlık.

Beautiful! How do you keep the lights from melting on a hot day?

Es un trabajo excelente, todo un arte realmente se necesita talento e ingenio para hacer algo así, el único inconveniente que me imagino es lo difícil que va a ser cambiar una luz averiada (uno mismo) hhahha

Un travail extrêmement parfait... 💯

Türk bir insanın böyle bir zanaatlar olması gurur verici

ELİNİZE EMEĞİNİZE SAĞLIK

Ассалямуалейкум! Алла разы болсын. Қолын шебер екен жұмысын жемiстi болсын. Керемет👍🔥

They look like BMW GTS lights supper cool. Thank you for what you do I enjoyed this video

Excelente trabajo, eres un maestro.

I really admire your work!

içim gitti harıka olmus yıne yenıden offf ♥

I have to give you respect, the learning and research curve must have been expensive, I wish I had the balls to try.

Ustam söyleyecek söz bulamıyorum eline emeğine sağlık muhteşemsin

This was a great build! Very interesting

Incredible work. That’s so impressive

this is really amazing thank you for sharing interesting content greetings extraordinary success And healthy greetings always

Love it! Just asking, couldnt you just have tinted the OEM cover?

You are an real Engineer..

Mi felicitaciones trabajo de un artista maestro. Me gustaría saber si puedes hacer unos de Honda CRV 2010 estilo MUGEN. Bendiciones desde Puerto Rico🇵🇷👑

Que hermoso trabajo amigo, ojalá algún día modifiques los de un Kia rio JB

Me gusta el resultado, se ve muy fácil de hacer 😏

Que maravilla de artesano, Dios te bendiga.

Great effort and very impressive craftmenship .

Excelente cada trabajo es una idea diferente y te sale muy bien muy innovador

@pablodelriob

Жыл бұрын

Que es lo que le pone con la jeringa? Y tiene dos capas de acrílico negro?... una es donde va las formas y el otro exterior... pero como hace la figura?

This guy is such an artist!

Abi bu nasıl bir çalışma o stopaj o şekilde şekil vermek nerden aklınıza geldi 🥰🥰🥰🥰🥰

@azccarstyle

2 жыл бұрын

Eyvallah Vural. spontan gelişti her zamanki gibi..

@Vural89

2 жыл бұрын

@@azccarstyle hepsi öyle 🧿😅

@gee1898

Жыл бұрын

I would like to know if you can purchase these lights?

Çok iyi olmuş elinize sağlık 👍👍👍

a lot of work, not for everyone but.... BEAUTIFUL!!!!!!!!!! 🤗 😍

It's amazing work, man. Keep it up!

Amazing work, can the light be accessed easily for repair, t5 leds are notorious for short life under outdoor conditions.

Amazing job. Full of patience and passion.

I wonder if you have your own online shop in different languages or page man you will win such more if you get to sell your designs products to your costumers. I've been following you since my friends does the same but in a cheaper way which I dont recommend. But you really do perfect work and have the instruments to do it. I've seen your evolution with new stuff and I know they will cost a lot but man your work is up to perfection I will pay anything by you sincerely we know how you work and how good is your handling. You amaze me every time with your designs if you make a online shop which can have other language option or page of your work please let your followers know I know most of us gladly will pay for it those who are international.

Awesome effort, amazing result, congrats!

You guys should make some 1989-1994 Lexus LS400 tailights, I would totally be in love.

Amazing Video, going to have to give this a go. Thank you 👍👍

Parabéns Pelo conteúdo!!! TOP DE MAIS!

Bro your skills are amazing. Great job

Quedaron muy perrones que gran trabajo👍

I can't believe my eyes... Such an amazing job...

Ты просто Кудесник!!! Мастер этого дела!!!