This is exactly what I was hoping I could do with control room. Your instructions were very good. Thank you!

Control Room is really useful too to switch from stereo and mono to check the mono compatibility and the sound :)

hello,you know what, i'm french and many times it's difficult for me to understand Americans or English youtubers but you ,i understand everything ,thank you for your beautiful English and for your very interesting work

Thanks a million for showing me how to configure different monitoring EQs for different monitors! It's been driving me mad that I haven't found it, and I've been using a Que for my second monitor instead, but then I've had to both turn off the mains while turning on the second monitor. Now it's ONE click! Yeah!

Thank you Chris! The "Listen" trick is just awesome! 👍

An eye-opening tutorial for me. Thanks Chris!

Thanks Chris! I always learn something I didn't know from you.

Greatand in depth as always Chris - those Dim controls were new to me. I use the Cue mix for my singer, usually give him Cues of the group channels, but sometimes just switch his heaphones to the master so he gets an idea what the finished mix sounds like. Really one of the main features of Pro, I couldn't work without that. Haven't tried the talkback yet because we work in the same room, but even then I can imagine it helpful to sing him harmonies.

Hey cool, never tried the control room, but was thinking about it a lot. How it can benefit me and my workflow. Looking forward to this video. Also my compliments on your other video's, I use them a lot in Cubase forums if people have questions about Cubase. Keep up the good work.

Thank you Chris for sharing this great video with lots of tips! Keep up the good work.

Hi Chris, I use the Control room all the time but some of the questions I had , got answered in this video of yours..Thank you so much for that.

I have always been using the control room in Cubase. But this video gives insights I haven't been aware of. Great job! Thank you Chris!

Hi Chris, thanks a lot for going through the control room (with your own preferences). I've been using it for sometime, especially after I've started to use VST Connect. But still I've found your session on the CR very useful, since you've included topics like monitoring set-ups, the function of the "listen" key, cue-mixes etc. Irony is that maybe all this information is available in the manual, but I like to see, to hear and to compare. Also, you are a proficient teacher. Thanks again.

Fantastic video Chris! I think Control Room is what separates the men from the boys in DAW terms ;)

@mixdownonline

4 жыл бұрын

LOL,, Tha is the best comment I got so far! Lol

@robnijhof1978

4 жыл бұрын

Among a lot of other things Dom! If people claim that [enter in any other DAW here] is better than Cubase, it's just pure ignorance :)

Really nice and informative video, thanks!

Thankyou for this! Perfect!

Very helpful. Thanks for the great tips!

Great Video as always. After watching your videos it makes me second guess the "other DAW" that I use. Keep up the great work

Thanks Chris...This gave me some great ideas.Till now I've only used the control room in a very limited way. I only have one set of monitors but I have 2 headphone outputs so I set up a special mix to compensate for the shortcomings of a second crappy set of headphones I have so I can have someone else listen in with me when that's called for.

I know to setup control room, but you always show some cool tip, can't wait to watch! 😊

A very interesting video, thanks a lot!

Your videos are awesome, control room rocks!!!

Thanks Chris!

Thank you I love your videos very helpful

it was very very helpful Chris

Merci Chris!

Thank you Chris

Very informative as usual, thank you. Cheers Dave

@mixdownonline

Жыл бұрын

Very welcome

Very informative video sir 🌹🙏

That was very interesting! Thanks a lot Chris!

@mixdownonline

4 жыл бұрын

Glad you enjoyed it!

Thank you, nice one

The awesome thing about your tutorials is, you're not only learning about the functionality, but I also understood what Pre and Postfader meant all the time hahah, it just describes the physical location of the Signal before or after that specific track where the fader sits. Like Dry/Mix if you will. Before/After. I think you get what I meant. All in all, the biggest critique I have about Cubase is, you can not do it right unless you have the pro version. Period. there is no way you can improve on anything when the artist version is limited that hard. But I don't care anymore, after 6 or 7 years of Learning with Cubase 5 and making the jump to Cubase 11, my wallet did get lighter by 600 bucks, but I am finally free to produce actual usable music. Thank you Chris, I subscribed and hope that there will be more amazing Videos coming. Do you have a studio tour where you explain what you use for recording audio and an "essential guide" ? I would love to see that and take notes :D

Great tips! My favorite thing to do in the control room is to switch between monitors with a key command and changing stereo to mono with a key command also.

@SaenSaen1

4 жыл бұрын

This is what I want to do as well. What interface are you using? I'm wondering how I'm supposed to hook up different speaker setups to mine...

You rock, Chris! Thanks for this. I've been dodging Control Room because I couldn't find the right teacher and tutorial. You da man.

@mixdownonline

3 жыл бұрын

You're very welcome! Thanks!

Love these bread and butter videos, good stuff, keep up the good work!

@mixdownonline

4 жыл бұрын

Thanks, will do!

I have used control room for a year now and feel I just really learned how to use it now by watching this video. Chris, YOU ARE THE MAN!!! I use Sonorworks as well and now moving it to the Control room insert solves muting it when exporting files.

@mixdownonline

4 жыл бұрын

Oh Yeah! That will be a workflow improvement for you!

Thank you!

Thanks Chris, this is an area I have kind of stayed away from, Why cause of not really totally understanding it fully, I would love to see a part two s(2) on this process. Again thanks for your continued community support and education. Cheers Bruce :-)

Great video, I use the controlroom mainly for my Sonarworks and the Listen feature. I have not enough free outputs to connect both pairs of speakers at the same time and I am "alone" or we are all in one room.

A big thanks to you, Chris. You are a genius in cubase. I use cubase pro 10.5 and I love it, but videos like this one from you get me more acquainted with my DAW and makes me like it the more. Infact, for me, cubase pro 10.5 is simply the best. Thank you once again and keep up the good work. God bless you abundantly!

@mixdownonline

4 жыл бұрын

Thanks for your comment, I appreciate that! Happy that the videos are helpful :-) God bless you too, brother!

Great video! I don't have a physical monitor switcher, so I use the inserts on the monitor outputs in the control Room, mapped to buttons on a physical controller, to send through the appropriate Sonarworks profile for each of my three monitor pairs. I also have one on my phones channel to use the profile for my headphones. I made a video on that too.

Best explanation!!!

@andymendoza1351

2 жыл бұрын

Followed you to the T. Still can’t get it to work. I am currently using the TB option thru my Avocet, but would like to have the Cubase ine as backup

Hi Chris, This is really very useful for learning Cubase 11. thanks so much for very kind explaination GREAT MAN!!!

@mixdownonline

3 жыл бұрын

You're very welcome!

thank you man u always been so helpful to us

@mixdownonline

3 жыл бұрын

Glad to hear that! :-)

Hey Chris - Great Video. Question: I find that I have to disable CR and revert back to main outs when adjusting vocal clips in variaudio or I cannot hear them in realtime. Am I doing something wrong?

Thanks Chris. I never thought about sending the Cue mix to OBS when recording tutorials. Going to try that now. I also use a Nanokontrol for macros, frequently used commands etc. It's a very useful little gadget.

@mixdownonline

4 жыл бұрын

Useful gadget for sure :-)

Thanks Chris ! toujours de très bons tutos comme d'hab ;)

@mixdownonline

4 жыл бұрын

Merci Fab!

Thanks for that video. I learned a good tips for OBS capture. For me, I use Control Room in my Home Studio for Stereo/Mono switching, its easy to validate a whole mix. Then I also use multiple Cues for A/B or reference comparaison during mixing or mastering.

@mixdownonline

4 жыл бұрын

I'm planing a full video on my process using Cubase and OBS. Thanks for sharing!

Hello Chris, thank you for taking the time to make these videos. They are very helpful. I have an unrelated question regarding the Piano Roll in Cubase 10 Pro Q: Is there any way to get the note names on the KEYBOARD ROLL on the key editor?... e.g. c1,d1,e1 etc; all of them, not only the C's... I'm not a piano player and having additional references when drawing midi blocks would be very useful

I use the Control room but never thought about putting Sonorworks on there so I don't have to keep deactivating/activating it for mixing down. As you showed, you can have different Sonorworks profiles for different speakers ready to go with a single click. Also you explained the L button for me which I look at but have never used! Now it all makes sense! Great video and explanation of a feature of Cubase I overlooked for a long time. Thanks Chris.

@mixdownonline

4 жыл бұрын

You're welcome, my friend!

16:30 thats what I was looking for! thank you

@mixdownonline

3 жыл бұрын

You're welcome!

Merci mec!!! j'apprécie beaucoup tes capsules, elles me sont très utiles!!

@mixdownonline

2 жыл бұрын

Bienvenue Pascal, heureux de voir qu'elles te sont utile :)

Wow! thanks a lot for your useful tips - your explanations are always clear - I'm using Cubase 10 Pro, and it's getting more complicate since I've started in lower versions years ago. ;-))

Good video! Thank you! :)

@mixdownonline

Жыл бұрын

Glad you liked it! :-)

Thanks Chris! I love using control room. It’s always on! I recently started using it to listen to reference tracks while mixing. This way I can route the reference track so that it doesn’t go through my master buss processing, and I can seamlessly A/B my mix by switching between Mix and Cue 1(or 2-4) If I set the reference track to solo defeat, I can also seamlessly A/B soloed tracks in my mix against the reference track. Love your videos!

@mixdownonline

4 жыл бұрын

That's a cool way to use the CR, thanks for sharing!

@maartenligtenberg8051

4 жыл бұрын

Thomas Kinzel I use the listen button in the CR for switching to my reference track. Then you don’t need to use the cue sends.

This is great thanks. Have you done a video on setting up OBS with Cubase? This woul;d be really useful for me

@SchraderBeatz

2 жыл бұрын

In obs under Audio settings ya can choice ya Interface and ya fine for streaming mayb ya need loopback function in ya Interface

As always, a great video; very concise. Agreeing with Nelson, the 'Listen' trick is awesome. Even just using it to set up effects will save a lot of time. My search for this video topic was motivated by a phone call I received yesterday from a friend in Germany (I'm in Toronto) who lost his 'stereo' playback to his speakers; would only do 'stereo to mono' playback. A new piece of hardware that wouldn't connect made him think that Cubase was set up incorrectly; it was a fault in the hardware unit which he's sending back today. So he messed up the Cubase Control Room before he worked that out. I had to log onto his computer (I used Teamviewer) to correct it. I couldn't make it work with just verbal instruction. The reason is that he is running 9.5 and I am using 10.5. There are some differences in how to access and select output mixes. A few new buttons in the newest version of Cubase. I thought that I'd mention this in case someone is having a problem making this work. If you still have 9.5 version on your computer, check it out. Setting up my 'Listen' now. Thanks again.

@mixdownonline

3 жыл бұрын

Hey Canadian brother, thanks for your CR update

Hi Chris, great tips again! I use the Control Room all the time, e.g. for Ref-Tracks routing, so my 2-CH. MASTER w/ plugins is bypassed. This way I can switch between Monitors and Cues (Refs) in no time at all. And yeah, the Listen Mode in Cubase is great, it's very useful during the mixing, 'cause listening halfway in context, thanks to the Dim-Level, is something that I really love. I use the Solo Mode as little as possible. Have a good one, and stay healthy bro!! :-)

@mixdownonline

4 жыл бұрын

Thanks for sharing, Frank!

@Frank.Zimmermann

4 жыл бұрын

My pleasure Chris! BTW: I like the Rear Bus technique a lot, it's very cool.

I always used the direct output but now i find i have much more control over myt monitoring system and i can now switch from one set of speakers to another seamlessly.It might just be me but i find my stereo imaging sounds more spacious than before , there seems to be more depth but that could just be an illusion.Thanks for another great tutorial.

Hi Chris. I also have a AXR4 and the other day I was fiddling around with OBS. Can you elaborate on how you have the cue mixes in Cubase set up and how you have set up your routing to capture everything in OBS? Can you record the Cubase output and your microphone seperately in OBS? Love to hear how you did it! Best, Rob

Hi! Chris, great videos. I bought Steinberg UR 44 C in an attempt to improve work flow between Cubase (12) and it, but I was a bit disappointed. Control Room and DSP effects synchrony: To my surprise having to use DSP effects hinders work flow in the following manner when recording in the same room as many of us do these days: When one wants to use DSP effects, one would select the track one would record on and the dsp panel would appear on the inspector. Problem 1: But for it to appear, you should have output busses under "Output" tab as opposed to having busses in the control room. If you have busses in the Control Room for headphones mix for the singer and monitors, but not have busses under "Output" tab, the DSP panel will not appear on the inspector. Implications: This means that, for me to record audio using DSP effects, I'm forced to have to remove L1 and R1 busses on "Monitors" under Control Room tab so as to use them at the "Output" tab. This would then mean that, my Monitors are silent and the "Main" button does not work. This is a huge inconvenience because sometimes one oscillates between recording and editing. The only way to resolve to dial down the physical volume on the UR 44 C. I was hoping I would not have to touch anything physical like I used to on my previous interface. I could control everything from the "Control Room" without opening audio settings. I wish Steinberg make DSP effects panel active even just by simply activating Control Room. It is better to try what I'm what talking about. Don't mind creating a video to explain better. Could you please do a video on how to increase work flow if you record in the same room while working from computer on Control Room while using DSP effects.

Good evening, is there a method please to separate general listening "stereo out" and listening to the media bay? in other words I want to route the sound of the media bay separately in another audio track? I heard that it is feasible from the "control room" but it seems very complicated for a beginner A video explaining the procedure would be great

Great video! One other option - I run a talkback through Cubase and back out, so I can use the Muteomatic plugin, to automatically disable during playback.

@mixdownonline

3 жыл бұрын

Cool stuff :-)

Great video as always Chris! A question if for you. When I set up my control room all my audio I send to my cues seem to be panned a bit to the left. All my panners are dead center so I don't really know why. Any ideas on why this is happening? I have looked everywhere I can think of both in my settings and on-line to find an answer.

Thank you for shedding some light into this subject, just yesterday I was looking to understand how the Control Room works and baaam, you release an idiot proof tutorial!! Also, if you have the chance, I would love to see how you approach Reamping and how you address the latency issue caused by its process, that would be a life saver for many people I guess!✌

@mixdownonline

4 жыл бұрын

Yeah, sure! I can do a reamping video :-)

@carlosalmeida7174

4 жыл бұрын

@@mixdownonline You're awesome, and that's why I always search your channel first when looking for a tutorial or addicional info on a subject! Keep up the good work \m/

Just used this to figure out how to get audition working on the offline processing, worked a treat thanks

@mixdownonline

3 жыл бұрын

Awesome!

Hi Chris, One question regarding the "Listen" mode. It seems that Cubase is able to route "Listen mode" signal only directly to the CR, which makes it it impossible to monitor for example FX track if we are mixing to master (due to signal level differences). Is there any work-around to solve this situation?

I have many questions about Cubase Pro control room feature. Looks very interesting. First, is there a way to have momentary on/off switching like a conventional studio talkback, opposed to the click on/click off? (That sounds like a recipe for disaster if it accidentally gets left on and picks up confidential control room dialog and all the players hear it!). Is there a setting to have faders control a cue mix instead of the little mousey line bar? What about a remote control room volume pot? I like your idea of having the control room mix on a stereo channel in cue for quick monitoring but is it possible to send the mix to all the separate channels quickly, then be able to tweak separate cue mixes as needed for players? Effects and sometimes even eq on the cue mix channels seems fairly obvious, but please elaborate. A great cue mix is one of the most overlooked factors in getting great, balanced, inspired and dynamic performances. Thanks for great tutorials!

When I put meter-plug ins into the inserts of Control Room: are there similiar results or differ they from putting them into my inserts of Master-Out? Thanks!

Thank you Chris great video as always, do you prefer keep the project as midi or covert it to audio and then mixing & Mastering? Midi is taking too much cpu power.

@mixdownonline

4 жыл бұрын

Convert to Audio all the way, I never keep MIDI when mixing

Question: how do you get asio audio into OBS? -> I can route audio from cubase to any output ( RME UCX ) I can select that in OBS as input then, but no sound is coming through. Would be nice if you could explain how you dealed with that. I think Cubase is using ASIO drivers exclusively... Maybe you could go a bit more detailed into the OBS side of explaining in some of you next videos.

@sabrabosewicht2034

4 жыл бұрын

Hey Chris, can you do a tutorial, of how you make your videos?

@mixdownonline

4 жыл бұрын

It's comming soon :-)

@theduffaloes3822

4 жыл бұрын

Hi Valomat, I came here to brush up on my control room knowledge as I had forgotten how to use it, then was surprised to see Chris use it for OBS. I didn’t give that a thought. Anyway, I struggled like yourself to work out how to get Cubase into OBS. I ended up using a third party app called VoiceMeeter, which I had seen a few tutorials on. I have done my own tutorial which may help you until Chris gets time to do his. I will be waiting for Chris’s video also as he always pops up with some great tips! @ Chris....great work...thanks a bunch. kzread.info/dash/bejne/hKGTsM2lYLSfh9I.html

Hii love your stuff Chris! How did you get your mixconsole to color the racks?

Thank you for this long explanation, Chris. It was very enjoyable and enlightening in some details that some of us had not seen, apparently. LOL, you forgot to unmute but in 12:16 you unmute instead of mute 😹. We call it “gajes del oficio”. How does OBS get the audio? You send the cue mix to hardware output and OBS get this from an input or is this done all directly via software?

@mixdownonline

4 жыл бұрын

LOL, Yes, that's what I did...For OBS, I will release a full video on this very soon to share my process using Cubase and OBS.

@korkenknopfus

4 жыл бұрын

Oh, that sounds perfect, thank you!

my go to when i need cubase help,,,your name should be Cubase Selim ;)

Hi Chris, another perfect and very helpful video. Thank you! I have another and additional question: I would like to use Cubase 10 Pro to cut out a certain area from an audio file and make an exact loop of this cut area. Is there a specific procedure?

@mixdownonline

4 жыл бұрын

I would say to Cut your audio to what you want and to make sure that the loop ENDS at the end of a bar so this way it will be easier to copy that around. And you can also add a tiny Fadein/out to smooth that out which will help when the loop is been copy/pasted

@michaelmos7497

4 жыл бұрын

@@mixdownonline Thanks for the answer, Chris. I'll try it out right away ..! 👍🏻

Great tutorial. I love the features of Cubase Pro's Control Room. I do have a question, though, that I'm a bit confused on. The Control Room provides great routing options for monitoring, and basically leaves Cubase's main stereo output to be used just for exporting your stereo mixdown. I'm sure I'm not the only one, though, that like to put a bus compressor, EQ and/or limiter on my master bus for mixing. If I'm using Control Room, does this mean I need to put these plugins on my master stereo bus as well as my control room bus, with the same exact settings, so that I can hear the effects of these plugins both when monitoring through the control room as well as in the stereo mixdown that is exported through the stereo master bus? For example, I might insert an SSL bus compressor on my stereo master bus. Would I need to insert the SSL bus compressor plugin on both the stereo master bus as well as my control room inserts and match their settings? It seem to me that if I don't insert the bus compressor on the control room, I won't hear its effect when I'm mixing/monitoring, and if I don't put it on the stereo master bus, my mixdown won't be affected by the bus compressor. However, having to insert it on both the control room and the master bus and match the plugin settings seems a bit inefficient and dodgy. It would be nice if there was an insert chain that was shared between the control room and the master output bus so that both could be run through the same exact plugins. Am I thinking about this wrong?

@mixdownonline

2 жыл бұрын

You can add your Mix Bus processing on the Stereo Out channel like you usually do. No need to add them again in the control room, the signal coming out of your Master Out Channel is what you're go hear through the CR. The CR Inserts are for monitoring types plugins like a VU Meter, Graphic Analyzer, Sonarworks Sound iD, Waves NX for Headphones... Plugins you monitor with, but don't want to bounce with your mix. Hope that helps!

Hey thanks for tge video, it was great, one question, are you recording the vocal directly to OBS or you are running the mic through cubase and sending it as a second cue mix? Also is sending a cue mix to OBS solves the no audio problem with the Asio driver?

@mixdownonline

4 жыл бұрын

I'm planning a full video on my Cubase OBS process very very soon :-)

Hey Chris, you have a stereo out put and a master out put, how did you set that up?

Can you please make a video about how to setup the talkback function from beginning to the end? Input of the mic etc.

Hey Chris! I'm wanting to setup the CR with one monitor out and two headphone outs... One headphone out with SW calibration profile and one with VSX plugin. CR however has only one "headphone" out... So should I setup the other headphone out by using "monitor" or "cue" bus and is there any major difference which ever I'd choose?? Thanks!

great video...also use cr in connection with obs. and voicemeter

Is there a way to use the control room to use a laptop's onboard mic for a talkback mic? In the studio, I simply use the talkback functionality made available through my monitor controller. But I often track demo vocal on a laptop at other locations and I'd love to know if there's a way to do this -- I'm a little worried that Cubase may unfortunately not have the power to do this. What are your thoughts?

Thank you. Bonus! I have a Nano control lying in my cables flight case doing nothing. It never occurred to me to use it as a controller. Brilliant.

@mixdownonline

3 жыл бұрын

You are welcome!

Whwere did you plug in your Talkbac mic? And/or did you set it up in the routing panel?

Using Cubase 11 Pro, any differences I should know about between 10.5 and 11 for the control room? Thanks.

Hi Chris, great video and hope you are doing great. I have learned to love working with the control room in my workflow (FOR SONAR WORKS, ANAYLIZERS, REFRENCE, DIM, CUES) but my media files will not playback unless I turn the control room off. I have watched other videos showing how to route everything but it did not work when I try to set it up. I have routed my monitor outputs in control room panel but it did not respond. There is no input showing in my UA Apollo twin interface when I try to listen to the media bay files but...when I disable control room the input shows and I can hear the file in my DAW and UA. Any suggestions are greatly appreciated. Have a nice day.

Hello Chris. This is VERY interesting. I've got a novation Launchcontrol XL and i wonder if it's possible to assiging Control Room Level wheel to a midi fader and how I go about it? I really can´t find that CRL in the settings. Thanks for the awsome videos. Cheers from Sweden.

@mixdownonline

4 жыл бұрын

Yes of course, instead of selecting Commands, select VST Contro Room then Control Tool then Volume, that will do it!

@robfel68

4 жыл бұрын

@@mixdownonline 1 minut later and it's working like a charm. Thank you sooo much my friend!!!!!

Hi Chris. As usually very helpful. May you, please, prepare tutorial how to record audio from Cubase into OBS together with capture screen?

@mixdownonline

4 жыл бұрын

SUre, It's on my list!

@dmgl

4 жыл бұрын

Chris Selim - Mixdown Online thank you 👍

Hi Your Videos helped me a lot Thank you very much. I have since Month the problem, that i would like to stream vom cubase 11 pro the sound i recorded, and live percussion to obs and from there to twitch. My Problem is i worked with Voice Meter Banana, but there always is a Latency with my Mic...

F19? Damn, I have heard of amps going to 11, but keyboards going to F19? Seriously though, outstanding video. It took me a while to get through using the Control Room, lots of swearing, at times, missed switches and stuff, but once you get it down it's pretty sweet. Our band has 4 guys, so each one gets a cue mix, and that helps a lot. That MIDI controller trick was way cool too.

@mixdownonline

4 жыл бұрын

LOL... Does that mean that an amp going to 11 is louder? "Well, it's 1 louder, isn't it?" #classicspinaltap

Hi Chris.. Thank you for your videos. Could you please tell me if I can use the control room feature if I have an audio interface with 1 main out (L+R) only? I have the Steinberg UR242 that has 1 main outs (L+R) and 1 headphones out.

@mixdownonline

4 жыл бұрын

Yes you can, and you should. Your main Stereo output will be used by the Control Room. Using the Cues Mixes will not be useful in your case but everything else will.

Do you have to switchback to regular outputs to export a mixdown?

Question: When you first opened the Control Room you had Sonarworks Ref in an insert slot at the bottom of the CR but then moved it up to your Monitor's insert slot. What is the lower set of insert slots and how are they different from the ones under the monitor? Thanks!

@mixdownonline

4 жыл бұрын

The ones on top will affect a specific Monitor Output, each monitor output will have Insert slots. if Sonarworks is added at the bottom like I do, that affects all monitor outputs.

@budmaynard5952

4 жыл бұрын

@@mixdownonline Makes sense -thanks. Stay safe, be well. Peace from SF

Hi Chris...:) is there a way to assign a midi KNOB of my Midi Keyboard or Faderport to control the Volume Knob of the Control Room? Thanks a lot.... I have assign the Mono And Stereo switch to my faderport but i dont see the VOLUME comand...

Hi Chris, how do you set up a Cue mix when you are using a reference track? What is the main purpose using this option for a reference track? Thank you.

@mixdownonline

3 жыл бұрын

My answer is in this video kzread.info/dash/bejne/hXmZj5Obo8TYg8Y.html

Starting audio recording i used the control-room for different mixings to record. One cue was used for backingtrack an other for my instrumet i#ve recorded that moment. Both cue's i've routed to my interface that had 10 outputs and for of them i used to go in my mixer. In the mixer i had two subgroups where one i used for the backings and the other to hear me playing while i am recording. Now i use a digital mixer and so i have no use for the control room now. Maybe later when i buy a vocalbooth to put it in a different room, i will use the controll room for the studio-room and one cue for the vocal booth.

@mixdownonline

4 жыл бұрын

Cool setup Dirk, thanks for sharing!

@dirktoaldi7423

4 жыл бұрын

@@mixdownonline I thought first, that my english is not good enough, that nobody can understand what i am writing, but i tried it and that showes me, that where is a will, ther is a way. Thank you for your respond!

Can you do a video on routing to external effects (ie re-amping)

@mixdownonline

4 жыл бұрын

Yes, you're not the only one asking so this topic is on my list!

what is the recommended mini controller for cubase 12 for scripts

I use the control room while streaming. I have two cues set up, one that goes to the stream, one that goes into my in-ears. The one to my in-ears has my click track, and a slightly altered mix so I can hear the instruments I'm playing. I send the talkback to both, to use as my speaking mic, and I have a plugin (Muteomatic) that I use to mute the talkback when I go into play mode. When I'm not performing live, I just listen to the regular monitor mix, which goes to my monitor controller. One of the biggest benefits for me is that the control room configuration remains intact, even when I switch projects.

@mixdownonline

4 жыл бұрын

Seems like a nice setup your have there :-)

@guidogandjeh-sani791

3 жыл бұрын

You can set up in preferences, that the TB is mutet, when Cubase is playing. No need for Muteomatic. I use Muteomatic in the Reverb channel, to stop the Reverb when in Stopmode, when I talk to the talent, so you can speak without Reverb.

Hey Chris, thanks for the video. I also use an external switcher for my 2 sets of monitors and use Sonarworks 4.0 which i have on my master bus. I never use the control room as i record alone in my setup. However was looking for a quick way to be able to switch from A to B monitors via keyboard shortcut so i don't have to always open the Sonarworks window which is a headache every time. I know that they have recently implemented midi control for this but I don't use any midi controllers. Any ideas or tips on how to switch over quickly (preferably by keyboard shortcut) could your setup of the 2 Sonarworks instances on the control room inserts be used that way perhaps, or do you know of another way to get this done? Thanks

@mixdownonline

4 жыл бұрын

You can create one in the Key Commands window...look for "Control Room"... and loof for "Select Monitor 1", "Select Monitor 2" etc... Assign theses to a computer keyboard key of your choice :-)

@robnijhof1978

4 жыл бұрын

@@mixdownonline Do you know if it's also possible to control the Volume Knob of the Control Room with a Key Command?