Instructions not clear, blew up Chernobyl

@subpar3462

4 жыл бұрын

Koalaz *blew up Chernobyl even more

@xoom8980

4 жыл бұрын

again*

@datboi1026

4 жыл бұрын

ROFLMAFOOOOOOOOOOOO

@BluCoolKnux

3 жыл бұрын

Koalaz im the 666th like 😈

@FernandoNeira_

17 күн бұрын

like 777

that guy who broke your ribs was a forza player

@ahhadesss

5 жыл бұрын

A noob forza player, pros don't do that lol

@timothycooperider8541

5 жыл бұрын

Let's clarify Forza HORIZON 3 player😂

@jlasiter881

5 жыл бұрын

@Dajaanichu Mario kart ds is godly tho

@encrusiato7553

5 жыл бұрын

More like a Nascar driver from 1977

@yridox8730

5 жыл бұрын

That guy who ddossed you was a dude named Owen

Ukog's strat in the background has more dust than the GH franchise after it died

"The difference is light and day" -UKOGmonkey 2019

Poked my guitar with a needle and fcd soulless 9. Thanks.

"The difference is light and day"

@snorchill3170

4 жыл бұрын

Lol I thought I was the only one who heard that

@eriktoland3259

4 жыл бұрын

And the lights have turned to gaaaayyyy

@OutOfNameIdeas2

3 жыл бұрын

Aka not a big difference

@Latemusicreviews

3 жыл бұрын

@@OutOfNameIdeas2 r/wooooosh

@damientheincin

2 жыл бұрын

For gamers that is a difference cause we never go outside ha

The GH3 Les Paul requires a T10 security screwdriver.

@UKOGmonkey

5 жыл бұрын

legend!

@cirava

5 жыл бұрын

@@UKOGmonkey I had to figure out myself, thank god my dad had that screwdriver set.

@VacantSpirit

5 жыл бұрын

ye ive tried to open it but always forgot so i give up as i'm not enough motivated to go garage look for one

@touis1999

5 жыл бұрын

T10 SS is for the 2 screws attached to the fretboard or the other ones that are outside the guitar ? Cause I haven't been able to find a screwdriver in my house that could remove the 2 small screws attached to the board lmao

@samquilter8300

5 жыл бұрын

@@touis1999 #1 - #2 philips head will be your best bet for the internal ones, precision screwdrivers might not have enough hold or torque

sounds like ive got a cold its not that ive just *broke my ribs*

@defuncy91

3 жыл бұрын

just the usual. y'know, when you break your ribs i HATE when that happens!

@elijahshepley7434

3 жыл бұрын

Agreed

Part 2 talks about the strum bar and how to stop overstrumming! kzread.info/dash/bejne/hadttJpqZZawcZM.html If you have any other questions or need help with stuff then let me know in the comments, I can try to help or even make another tutorial! :D

@FelipeGuimaraes45

5 жыл бұрын

I'm having an issue with my xplorer guitar, it is down strumming infinitely without pressing the strum. It only stops when I press the up strum. It would be great if u could help me! :D

@sparx0414

5 жыл бұрын

Great vid dude, I'm looking forward for your part 2. I always over strum on my xplorer guitar.

@Semystic

5 жыл бұрын

Is there a good place to get miscellaneous guitar parts/buttons or should i just get entire guitars and use parts from older ones?

@JuniorNitro

5 жыл бұрын

Do you know how to fix a strum bar if it presses the yellow on downstrum when you try to hit a Green Red chord? I have this problem with the one I just bought.

@lucas-jo1zv

5 жыл бұрын

make one about how to stop the squeaky strum

"No more excuses, if you miss a note, you missed a note!"

I tried not to bust, but I couldn't help myself when I saw the sheer sexiness of the insides. Please forgive me?

@DavidMignault1

Жыл бұрын

it's alright man happens to the best of us

Thank you so much for doing this video. I never knew about this and I was just about to buy a new guitar because I thought mine was too hard to press! I'll try these methods out soon... Kinda hyped!

I tried the safety pin method , now my buttons feel a lot softer , finally FC'ed Cult of Personality Expert!

@miraclealigner1620

4 жыл бұрын

Good shit

You are a lifesaver! I have VERY few guitars to work with and my green button was having a contact issue or something(it only registered when pressed it super hard). Opened my guitar neck, cleaned everything up, poked some holes in the rubber and the green button issue is fixed and overall it feels like it's brand new again. Thanks a ton for the tutorial!

i was legit about to look up videos about this stuff..... what a god

Holy hell i literally broke my down strum like 3 days ago ur a savior

Personally I like the ridge on the yellow button. It helps me know the position my hand is in without having to look down at the guitar

@JustTooManyPuppies

2 жыл бұрын

thats why its there yes i know this comment is 2 years old

Hey I dont know if you remember answering my comment awhile back, but this was super helpful, and I cant wait for the next vid

A little hint, to avoid rounding up the screws holding the fred-connector-board: do NOT apply as little pressure as possible, but the opposite. Apply as much pressure as you can without breaking the board itself because rounding screws happens when the screwdriver flips over the screw-slit which only can happen, when the screwdriver isn't pushed in enough. Otherwise, great video = )

@VintageGameZ

Жыл бұрын

i opened my guitar and the board has a rounded screw and i cant open it, any suggestions?

@Bambuzzsprosse

Жыл бұрын

@@VintageGameZ If it's completely round you can use a plastic-pen and melt the plastic with for example a lighter. Press the hot plastic into the screw and let it cool off. Take another pen, melt a bit more and apply it as well to create more stability. If you're lucky you can turn the screw without the plastic breaking. If the screw is not completely round but still has some rounded-off notches simply use a bigger screwdriver.

@VintageGameZ

Жыл бұрын

@@Bambuzzsprosse I will give this a try after work and hope for the best thank you!

@ChuckisNorrish

Жыл бұрын

@@VintageGameZ any update

I got an Xplorer yesterday, the buttons were so bad.. the buttons were high af on the fret, kept getting stuck, stiff af worse than Amazon's guitar... I modded it poking holes with the pin and loosened the screws so it goes in the fret more.. filed down the button's sides so it doesnt have friction... fucking smooth af now its actually playable.. better than all the guitars I have now. Thank you so much for this!

Thank you so much my dude! I was trying to asking on stream yesterday actually!XD

@clasherface7227

5 жыл бұрын

Ukogmonkey thanks for the heart m8!

Thanks dude this was such a help and i just wanna say love your content ❤

"strap-on holder"

@YoshoDinoSide

4 жыл бұрын

*"h e h"*

Thank you! My fret board is a lot more smooth, can't wait for part two!

Thank you for showing me how to open the neck of the guitar. I’m thinking about cleaning my buttons and changing the buttons around. Edit: button changing went great! And I’ll show my new buttons in a new video

Small correction there are Guitar Hero 3 guitars for ps2 with detachable neck ;) got you fam

@DekuSkrub2129

5 жыл бұрын

Can confirm

@UKOGmonkey

5 жыл бұрын

is that the kramer? i never used them, thanks for the info :D

@krazykat9865

5 жыл бұрын

My ps2 guitar doesnt come apart :(

@marlowewoodring

3 жыл бұрын

@@krazykat9865 its probably the SG

This is not my usual kind of youtube channel, but I really appreciate the guitar hero controller tutorial. I have a strum issue specifically, but it's still nice to see more information on the controller itself in general.

I just did the safety pin trick and my buttons feel absolutely amazing! I never would of thought of that.

This is just what I needed, thanks a bunch!!

Also, 8 bit hold the line is an absolute banger.

I can't remove the wooden thing that holds the rubber for some reason. It's completely stuck

For Americans watching: You're gonna need a small hex and a small Phillips.

@kohlmannn

5 жыл бұрын

**torx

@1ava

5 жыл бұрын

Torx 10 and Phillips head #1

@HentaiNat

4 жыл бұрын

Hex and torx are different. Hex are hexagonal shapes with flat sides like a normal hexagonal shape. Torx are like hex but sides are a bit concave, and the center is also concaved.

@chimmychuck

4 жыл бұрын

@@kohlmannnreally you only need a Phillips because I used only that to undo everything for my WoR guitar

@rawbertdogler

4 жыл бұрын

also, round off = strip

Can I do this with an xplorer rubber thing?I know it has a different shape but do I have to do the same cut procedure?

Can you make a video on taking apart the WoR guitar? I can't find anything for that guitar anywhere and I'm scared to break it

I love how enter sandman is playing in the baking but a 8-bit version good choice

how to make your guitar eternal in 10 easy steps gamecenters hate him

I watched this on my Xbox so I want you to know and appreciate that commenting was a bit more of a chore than usual. However, I was watching this video and as I got to the end after being enthralled by the contents of the neck I was slightly disappointed that you didn’t cover the body; I was excited to see that part. I was tempted to move onto another video when something in my brain told me to watch your outro. It was here that you mentioned part 2 being out already if the video was more than a couple days old. I looked, saw the video was posted 4 months ago and instantly I was excited again because I knew it’d cover the body. I just wanted to thank you for putting that little extra bit into the video. I might not have seen pt 2 if it wasn’t in there. I’ve got it paused as I type this, I’m about to give it a watch as soon as I press enter.

@dmtgoobz9721

4 жыл бұрын

Ian Vansickle he covers the neck in a part 2

The yellow button ridge actually helped me learn how to feel where I am when playing, I can't see myself playing without it 😅

The fretboard mod with the rubber/silicone piece or whatever is helping me with hitting the TTFAF intro (Smash Hits chart). Thanks!

Great tutorial ukog, great tutorial 😂

I was just complaining to my buddy about how I hate using the Wiitar I just bought because of how stiff the buttons are. I’m for sure giving the safety pin trick a go this weekend. Much love, Ukog.

GEORGE, a lot of the GH controllers I buy have extremely stiff frets when I push them down, like from the green to orange fret, it gets progressively stiffer and CREAKY, like the plastic is rubbing against the frets themselves causing friction and stiffness. I’ve tried at least 3 different GH3 necks and a lot of have the same issue, I’ve even tried carving some of the black neck plastic in between the frets but it doesn’t seem to solve it. I’ve been wanting to get back into GH trough CH and the Wii USB adapter but this has been my bane for so long. Problem might be too specific but I figured you might have experienced it at some point or another, what do you think? Stank you smelly much 🤙🏼

@UKOGmonkey

5 жыл бұрын

never had that specific issue before, what model guitar do you get? I would try sandpaper between the frets like what you were doing and also some wd40 to smoothen them up. Lube that hole and make it bigger! ;)

I know this video is insanely old, but was wondering if you had anything for when the buttons don’t register, back when I played Rock Band we would strap socks over the drum kits due to registry issues, is there anything safe to place where the rubber is to help with button registration?

Thanks Ukog...I made my only yellow button guitar :D

Thank you for the video, glad your ok!

I've never been more excited. Oh boy. Clone Hero here I come.

I love you ukog ❤️❤️ great video

If you were to clean the green side of the little board would that help with the problem of when pressing down your button it cuts in and out during game play? I can’t tell you how annoying it is to hit a chord and it just cuts off because my button cuts in and out

Love that this is in my recommended 4years later

Hi George. Glad to see you’re doing better. Hope to see you more

I have a WTguitar (xbox360) since 2010, and 've been fixing all the problems it came since then.. I can tell that 'she' is very smooth to play on... I expect the magnetic/metal of the buttons dont stop doing their job, but they are starting to... So I'm doing the opposite way: putting some levels behing the frets... Nice 'tuto' BTW

I have one of the old exbox 360 stratocasters. It's even got the lower neck buttons that are closer together and are way easier to solo with. Anyway, those are some nice tats Ukog.

UKOG FOR PRESIDENT

TIP: Some screwdrivers that are small can work to take out the screws from the neck and if you’re screwdriver if has a set of screw head things (lol) twist the screwdriver one is for taking out screws and ones for putting them in

welcome back!

Instructions unclear. Pierced all the rubbers. Now a father of 5.

a couple of tips that i have found really help! if you open up your guitar a lot buy a pack of lil 1cm cross head screws, this means you only need one screwdriver to do the whole thing and if one screw breaks you can just replace it. this one is for world tour/gh5 guitars only, take out the things on the head of the guitar and keep the screws around so if one of the screws holding the board on breaks you can just replace it (the screws work with les pauls and tour guitars i know that idk about the other guitars). Hope these help a bit :)

So I know this was a year ago but can ANYONE help me? I'm trying to change the color of my buttons and I just popped them out and spray painted them real quick but unfortunately when I get to playing and sliding the paint starts to warm up and gets tacky. Like, I literally play worse now because I can't slide up and down the frets like I used to. Any tips and/or different kinds of way to color my buttons without losing any slide potential?

Totally unrelated but i've been wondering for ages, are your tattoos waiting to be turned in to sleeves? They look sick

Over the years, have you found anywhere to get replacement rubbers other than second-hand guitars? I did that mod but stupid me decided to use the nearest thing to hand which was a Stanley blade, they're absolute crap now. Tried one out of a broken WT guitar but it doesn't quite fit over the orange button properly.

dude casually broke and ribs and took a dub regardless and then schooled us in electronic fashion

Do you know how to change the switch for the strum bar out? I have two guitars with bad strum bars in them. If not, where do you get more guitars?

Geroge out here living real life Capeta anime with winning a race with broken ribs lol

thanks for making this, my guitar's fret sometimes lag/stick in the game, might clean it out or something

Breaking your ribs while on the second lap of a 50 lap go cart race and still placing first is about the best conversion started I've ever heard

Does anybody know what the rubber piece that you press down on to register the buttons is called?

You can boil the dome switches to soften them rather than cutting them. I would also highly recommend using a ruler and sharpy to mark and measure your pokes/cuts instead of just free handing it. You will get a more consistent result. Probably would want to use a razor or xacto knife for the cutting too.

Dude... Is that an 8-bit version of Toto's "hold the line" I'm hearing?... Awesome 👍

I have 2 les pauls an x-plorer, a gh5 guitar, and a gh world tour guitar... on the world tour and gh5 controllers it's almost like my fingers are sticking to the buttons (the guitar and my hands are both clean) I first tried cleaning them with a wet rag and then I tried rubbing alcohol and neither have done the trick.. it almost leaves some sort of residue on my fingers after it's not quite sticky it just makes it really hard to slide up and down the neck of the guitar. Any suggestions out there as how to grease these bad boys up or something? (never experienced this with the les pauls or x-plorer)

Thanks UKOG I fixed my rock band Stratocaster!

Little tip, if you are worried about the screws getting stripped replace them with the same style screws but better quality

Yo Ukog, I used aluminum foil to help my guitar mark the green and red button on the silicone part and used a little bit of super glue to glue it to the silicone, is that ok or did I just fuck my guitar up?

how are you so good at this game... like seriously you are not human

Hello! I hope you can help me. I have a WoR (X360) guitar and had a glitch with the HOME GUIDE button: it is always active, always turning the console on and of and popping up the home guide. First i thought that the physical button may have caved in and was always pressed, but when I took the guitar apart, i removed the button, cleaned the chip and left it open when i reassemmbled the guitar. o. Even then the lights on the edge of the button kept on glitching as before. Any way to fix this? Thanks, Greg

"it may sound like i have a cold, but its not that, I BROKE MY RIBS"

The puns in this video my gawd

For one of my Guitars, I actually had to take out the small rubber bumpers that each of the buttons had because they would constantly shift and cause the buttons to stick.

this is great!

Ty I made my fretbuttons is cool now I use orange red blue red orange looks so sick

What kind of screwdriver is that? I got a GH5 Wii guitar and i've tryng unscrewing my guitar with all of my screwdrivers, but all of them its not fit well🤔🤔😭

@UGKOmonkey @Hak5 how can I install a jack for a drum pedal on my ps4 rb strat for overdrive activation?

I've always wanted to mess with my buttons, thanks George

Any idea how to fix the "neck release switch" on a guitar hero world tour guitar?

you’ll need a Tork’s screwdriver for the PS2 guitars. I happen to have one. My PS2 Guitar was actually my first one that I opened up, and I also happen to break it one time. One of the wires were so worn and old that it came clean off of the board, now my wammy doesn’t work.

Just wondering. The guitar in the thumbnail, how would you paint on the letters

@ukogmonkey A tricycle is just a unicycle with training wheels

@twistedyoyo20

5 жыл бұрын

You took that from raccoon eggs

@mintylectable

5 жыл бұрын

@@twistedyoyo20 FINALLY SOMEONE NOTICED

wow ukog made a modding video YEET

5:13 ukog shut up I want to hear hold the line LOL

i like the rocksmith controller you have in the background

I was at an arcade the other day and they had guitar hero, it felt so loose and fast compared to mine at home. Must’ve been sitting there since it came out so who knows how many uses it’s had.

I wonder if you could make a mould and manufacture the rubber bits

You know it’s funny cuz yesterday I literally was fixing my guitar wish I saw this video

I love your Scissors!!! Did Adelaide sell them to you?

You say that with this mod you can damage the buttons over time? thanks

What brand screwdriver is that? The Torx one.

I bet your shirt is predicting the next coming of woah memes

The White Xplorer guitar requires a T10 in order to remove their special screws as well a phillips head screwdriver for the inside parts :-)

now the real question is where do you get the custom fret buttons

I have a ps2 and the guitar hero dongle won't light up so it won't sync with Kramer guitar...what should I do to fix?

Guitar Hero World Tour for PS2 has a detachable neck too, iirc. You can mount a neck with a slider or just the buttons.