[OPEN PINNED COMMENT FOR LINKS TO PAPER AND MY SILHOUETTE CUT SETTINGS] Turns out after closer inspection on the sheets I said didn't cut one edge, turns out it was just sligghhttllyy out of the cut range. Whoops. That's my bad. Don't forget to double check! Really ZOOM in there so you don't keep wasting sticker paper like me heh Link to the sticker paper: Matte: amzn.to/3B5fMCf Glossy: amzn.to/3B689eR Frosty Clear: amzn.to/3H3caV2 *NOTE: These are Amazon affiliate links so I do earn a small commission if you do place an order with my links! It goes back to supporting my shop and channel :)) MY SILHOUETTE CUTTING SETTINGS: Kiss cut: Blade Depth 2; Force 4; Passes 1; Speed:10 Die cut: Blade Depth 4; Force 30; Passes 1; Speed: 10

I've watched multiple how to videos for making stickers with the Portrait cutter and yours is the absolute BEST! You give very clear instructions and explanations. Your video is super easy to follow!! Absolute fire!! Thank you so much for taking the time to make this video! xoxo

@DoodlesnTea

2 жыл бұрын

Thank you so much! I'm glad it was helpful ^^

@christianisleepy

4 ай бұрын

PLS HELP IM SO CONFUSED HOW DID SHE GET DIFFERENT CUT STRENGTHS AT THE START IT DONT MAKE NO SENSE :(

I realize you uploaded this quite some time ago, but honestly, after watching like 50+ videos on sticker-making, yours has been the only one that's been SUPER easy to follow and understand. Thank you for sharing so much detail and for going slow for all the newbies

@DoodlesnTea

Жыл бұрын

I'm glad to hear that it was helpful ^^

friendly tip instead of opening two different files, just open one file and then go to File and select MERGE so you can open the backing onto the same page or project you are working on :) thanks for this tutorial

@DoodlesnTea

2 жыл бұрын

oh whattt i didn't even know about that! That will definitely make everything more convenient haha thanks for sharing!

Finally a video that helped me so much! I just switched from Cricut to my Portrait today and your video has helped me so much!! And I always find the floor so much more comfy. :)

@DoodlesnTea

Ай бұрын

Yay team floor sitters! I'm glad the video helped 😊

Omg this is so helpful and the way you tell the steps are so clear and understandable, thanks a bunch!

@DoodlesnTea

Жыл бұрын

Aw I'm glad! Thanks for watching 😁

Excellent tutorial! The most detailed and perfectly explained that I’ve found on KZread. I love it! Keep up the amazing work. Love your stickers as well

@DoodlesnTea

2 жыл бұрын

Aww thank you so much! :))

Thank you so much, Natalie, for this extremely helpful tutorial. I would love to make stickers one day. The Silhouette Portrait 3 def seems like a game changer. Looking forward to watching more videos. 🥰

@DoodlesnTea

Жыл бұрын

Thank you so much ^^ Best of luck with your future sticker making journey~

This video is more of details. Thank you so much for making this video! I've been finding how to use this. And I found your video! Thank you so much for your hard word!❤️

@DoodlesnTea

Жыл бұрын

aww thank you :)) glad it helped!

This was such a good thorough video! Including procreate and photoshop was super helpful! Thank you ☺️

@DoodlesnTea

2 жыл бұрын

I'm so glad it helped! Thank you for watching :))

I really appreciate your video. It is VERY clear, informative and helpful. I've been waiting to get a smaller/newer silhouette machine. It's gonna be the Portrait 3

@DoodlesnTea

Жыл бұрын

Thank you ^^ Switching from the Cricut to the Portrait 3 was so nice because suddenly I actually have SPACE lol

This was soo helpful! I’ve been watching all your videos thank you so much 💞

@DoodlesnTea

2 жыл бұрын

Thank you so much for watching ☺️

This is the best tutorial ever! Thank you

@DoodlesnTea

2 жыл бұрын

Aw thank you so much >

Super helpful video! Just got a Silhouette Portrait 3, and this makes it look much less daunting. Thank youu!

@DoodlesnTea

2 жыл бұрын

I'm so glad to hear! :)) Best of luck with your new machine!!

Thank you very much. You taught me some valuable information that I can put to good use.

@DoodlesnTea

2 жыл бұрын

I'm so glad it helped! Best of luck with your sticker making :)

This was so helpful I can't even tell you~ 😍 Thank you so much!

@DoodlesnTea

Жыл бұрын

I'm glad it was helpful ^^ Thanks for watching!

Wow this is the most practical video that I've watched about Silhouette Portrait 3! I'm a beginner and this video helped me a lot in various aspects. Thank you so much!! :)

@DoodlesnTea

Жыл бұрын

I'm glad to hear ^^ Thanks for watching!

happy to see your tutorial. Thank you for sharing.

@DoodlesnTea

9 ай бұрын

Thanks for watching :))

I just got a silhouette and your video honestly helped so much (especially simple things like expanding the area you can print on omg!! i'm so happy!). thank you for sharing! ^^

@DoodlesnTea

2 жыл бұрын

yess honestly it's the simple things that are the most exciting~ I'm glad to hear it helped :)) Enjoy your new machine!

Thank you for sharing the guideline 🤩🤩. This video is what I am looking for.

@DoodlesnTea

10 ай бұрын

Glad it was helpful ^^

Great video. Thanks so much! ❤

WATCHING ALL OVER AGAIN❤

@DoodlesnTea

9 ай бұрын

Thank you ^^

Thank you for this! So helpful ❤️

@DoodlesnTea

2 жыл бұрын

I'm glad to hear 😊 thanks for watching~

Best tutorial ever! Thank you!! Xx

@DoodlesnTea

Жыл бұрын

Thank you so much ^^

Thank you for the video! So much good information for a newbie like me.

@DoodlesnTea

Жыл бұрын

I'm glad it was helpful ^^

very clearn explanation .. awesome!

@DoodlesnTea

Жыл бұрын

Thanks so much ^^

This was very helpful! I also struggle with peeling the holographic sticker paper off. 😆 I gotta tell the first time I made stickers I put the sticker paper on backwards, and this was after I had seen that it was labeled which way was the front. The paper wouldn't come off but after I got it off it's a lot less sticky and more manageable. 🤣 Sitting on the floor is fun. As you get older you want to continue. Always be able to get yourself off of the floor.

@DoodlesnTea

Жыл бұрын

Haha we all have our struggles! Yes to team sitting on floors 👏👏

Super helpful!! I love you!!!

@DoodlesnTea

Жыл бұрын

Thank youuu 😊😊

Thanks for this! planning to get the silhouette portrait 3 soon and this is super helpful.

@DoodlesnTea

2 жыл бұрын

Yaayy glad to hear! Hope you enjoy your new machine :))

@IzzaIsHere

2 жыл бұрын

@@DoodlesnTea thank you!!

I also find sitting on the floor to be comfortable too. I even nap on the floor sometimes; we even have a designated napping floor space, haha.

@DoodlesnTea

Жыл бұрын

haha that's the next level xD

I love everything ❤️❤️❤️

@DoodlesnTea

Жыл бұрын

Thank you :))

That was most helpful!

@DoodlesnTea

9 ай бұрын

Glad it helped you out~

I really like this. I'm into stickers. Thank you so much

@DoodlesnTea

Жыл бұрын

I'm glad it helped :))

Wow thank u very much ❤️👏🏻

@DoodlesnTea

Жыл бұрын

Thank you so much for watching :))

oh my god this is so useful!

@DoodlesnTea

2 жыл бұрын

I'm glad to hear! Thanks for watching :D

nice video!!

@DoodlesnTea

9 ай бұрын

Thank you!!

So helpful thank you

@DoodlesnTea

2 жыл бұрын

I'm glad it helped out!! :))

thank you, you're a life saver!

@DoodlesnTea

Жыл бұрын

i'm glad you found it helpful~

@bookwormparade2354

Жыл бұрын

@@DoodlesnTea helpful is an understatement! I just bought one and I understood things as much as I would if I had purchased a dismantled spaceship for putting back together! I'm technologically challenged mind you😊 Now I print stickers! Thanks a bunch!

@DoodlesnTea

Жыл бұрын

@@bookwormparade2354 haha well i'm glad my video helped figure out some rocket science for you XD best of luck with getting everything to run smoothly~

It’s 4am and I had the sudden intense urge to learn how to make stickers , so now I’m here lol

@DoodlesnTea

10 ай бұрын

Honestly night owls unite!! haha

this is such a great video. so informative. thank you.

@DoodlesnTea

Жыл бұрын

Thank you so much :))

Nice video!

@DoodlesnTea

2 жыл бұрын

Thank you so much :))

Thank you!!! It was so easy to follow your instructions. I've made my first sheet of sticker thanks to you. I have one doubt, question - how should I set the blade if I want to use washi (like) paper? I'm trying to make a sheet to decorate my 2024 journal and would like o have it on 2 small sheets. It will probably be waaay different setting than white sticker paper...

You are so helpful. I have to change from Circut to Silhouette portrait 3

@DoodlesnTea

2 жыл бұрын

Yes! I never looked back! 😁

Yu are a Gem luv. Thank yu so much ^__^

@DoodlesnTea

2 жыл бұрын

aww thank you so much :))

Thanks for the lovely informative video! Just wondering which blade and which settings you're using to cut the (holographic) laminated sheets? Mine is really having trouble cutting all the way through... Thanks!

its a amazing thanks you

@DoodlesnTea

Жыл бұрын

You're welcome :) Thanks for watching!

Your step by step instructions work like magic!!! Super thankful for your tutorial! Out of curiosity, if you're willing to share - i have managed to figure out which cut matches as "kiss cut" on my paper, but how about cutting through and through on the outer? which setting would you suggest? but only if you don't mind. Again, thank you! was super scared my machine was malfunctioning... only to find out my settings aren't completely set up. Hehe.

@DoodlesnTea

2 жыл бұрын

Glad it helped :) No worries! Here are my settings for the die-cut (cutting through the backing): Die cut: Blade Depth 4; Force 30; Passes 1; Speed: 10 I basically bump up the blade depth and force compared to my kiss-cut settings just enough that it goes all the way through and doesn't cut my mat (which was an issue I had on my Cricut back then. Ended up seeing my sticker sheet cut marks on the mat overtime >

@madsfranco5654

2 жыл бұрын

@@DoodlesnTea Thank you so much! Super helpful! Will check this once I print another set of personal stickers. Appreciate your help! Looking forward to more of your videos!

I love making stickers, I have been making car stickers. With different models of cars.

@DoodlesnTea

2 жыл бұрын

Very nice! :))

What printer do you use to print out the design on the sticker paper? and do you use rgb or cmyk? (This video was so easy to follow, i've been looking for this lind of video❤)

Thank you! This was really helpful, I'm looking for a silhouette and I was wondering if a portrait was a good option for what I need now

@DoodlesnTea

9 ай бұрын

I'd say if you want a compact small cutting machine this really does a good job!

Truly an AMAZINING video!! Helped me a lot on making my decision of getting a Silhouette than a Cricut. I just have a question, what printer do you use to make your stickers? Is there one that you recommend? THANK YOU!

@DoodlesnTea

2 жыл бұрын

I'm so glad to hear :)) I use the Epson XP-960 but that model is discontinued. I believe the newer model is the XP-970! I do have some other videos on my channel where I go through everything I use to run my shop if you're interested in those as well ^^

@leonasky416

2 жыл бұрын

@@DoodlesnTea Ah ok, thank you! And I sure will!!👍

I bought a silhouette and it’s just been sitting after few uses since I got frustrated when it didn’t cut right lol maybe I need to adjust something. Thank you! I’ll try again

@DoodlesnTea

2 жыл бұрын

Aww sometimes my machine acts up too (it just decided to not cut the right side of the paper again as I type this..sigh). Sometimes I just have to step away for a few days from it haha Hopefully you'll get your machine figured out soon :)

I've been watching all your videos! So helpful! Do you use the blade that came with the Silhouette Portrait 3? I am, but wondering if there's a better blade. I'm pretty close to finding the correct Force strength for both the red and blue lines, but sometimes the blue line doesn't have a clean enough kiss cut in some parts of the sticker paper. Thanks for your investment and time you spend teaching us all!

@DoodlesnTea

Жыл бұрын

Thanks for watching! And yes I do just use the blade that came with the machine. I left the settings I use in some of the comments if you want to try them out 😊 best of luck!

I was wondering if you can make them die cut as well, but this also helped thank you.

@DoodlesnTea

9 ай бұрын

Glad it helped~~

i recently bought a silhouette cameo 3. i was watching your video and im new to everything so im still learning but i did one design and im doing shirts so im using htv but for stickers is it required to have a printer because with my machine i can just do my design and then edit it and send it to cut and then transfer it to the shirt or whatever so therefore i use no printer and im confused on if its just with stickers or if it can be done with or without the printer ?

Very articulate and helpful video.. you really explained everything so well. Im just curious though, maybe i didnt understand properly.. when you were making the 2022 and Stay Toasty stickers, the software formatted them to fit on the sheet, but there was so much white space left over. Is it possible to manually move the stickers to fit more onto the page and less white space? Also when you laminated the Stay Toasty stickers, do your blade settings change because you've added another layer?

@DoodlesnTea

10 ай бұрын

Thank you for your kind comment :)) To answer your questions, all the stickers have to stay within the rectangle border. I might have been able to squeeze in maybe one or two more in but it would be really tight haha Also sometimes I find that my sticker flakes will get really small once I cut them out if I try to fit more onto a sheet. As for the blade settings, yes I did increase it because of the extra laminate layer that I stuck on. Hope this helps~

Okay so I may be late BUT this tutorial helpded a lot! Also is that a "general" printer or is that especially for stickers?

@DoodlesnTea

Жыл бұрын

Thank you for watching! Mine is just a general printer that was also advertised for printing photos I believe but it does have 6 ink cartridges for better colour accuracy :)

I have a couple of basic questions for you to answer because I am absolutely new to this. If I want to make stickers, do I need to print first on a conventional printer and then cut it into the silhouette? What I don't understand is that they offer these products in color and black and white, so I don't understand why that could matter if you have to print somewhere else. The other question is whether this machine can cut material that is waterproof enough to offer stickers for glasses, for example. Greetings

I had a hard time with the Silhouette Studio but everything is clear now after watching your video. Thanks a lot! ❤ By the way, anyone using Mac OS with Silhouette Studio? May i know which version of Silhouette Studio are you using? The recent one is a bit slow and has lots of issues. I heard Mac OS users are using other older versions of the software.

@DoodlesnTea

9 ай бұрын

Thanks for watching~ :)) To be honest, I don't use the newest version of Silhouette Studio either haha

thanks for the super helpful tutorial! jw what is your kiss & die cut settings for the blade? 3.68" w x 4.57" h works each sticker sheet for the photoshop dimensions like before you bring it into the silhouette studio so you don't have to rescale in studio. idk if rescaling decreases the quality?

@DoodlesnTea

26 күн бұрын

I'm glad to hear :) I re-pinned my comment with the blade settings (don't know why it got unpinned?). Hope that helps! Also, I have no idea if rescaling decreases the quality but thank you for sharing those dimensions!

Fantastic video, exactly what I wanted to learn and clear instructions. I just bought a Portrait machine and am almost ready to give up! I can't find the options for sticker paper, kiss cut and sticker paper die cut. Any idea where I find them please? I just want to make some stickers for my kids. Thank you

@DoodlesnTea

Жыл бұрын

Aw that's so sweet that you're making stickers for your kids. I hope they like them :) As for the options, I have those set as custom settings I added on myself. In some of the comments on this video, I have written the exact settings I have for those. Hope that helps!

@angsmith1401

Жыл бұрын

@@DoodlesnTea Thank you so much, I'll read through the comments and find the settings. My kids are both disabled and they love doing art so I want to make it into stickers for them.

@DoodlesnTea

Жыл бұрын

@@angsmith1401 that's so nice! I'm sure they will love seeing their art turned into stickers ☺️ best of luck!

Thank you so much for this easy to follow and super helpful video! Quick question, do you laminate your stickers? Do you think it's necessary?

@DoodlesnTea

Жыл бұрын

Thanks for watching 😊 personally I don't but I've seen some people do it. The paper I use is okay if it touches water (of course don't like soak the whole sticker 😅). I have a review on the paper on my channel too! I do know (and have used) sticker paper that is much more paper-like than vinyl and in those cases, I would probs laminate to make it more durable. I guess another good question is are you intended the stickers you make to be more for journals where it'll stay dry or for water bottles where you'd possible need to wash it. Hope this kinda helps 😊😅

@jasminegutierrez4545

Жыл бұрын

@@DoodlesnTea Thanks Nat! I use glossy vinyl and I actually did test one and soaked it in water and it survived without even needing to be laminated! I think I'd imagine the stickers for multi purpose use since even without lamination they're pretty water resistant. I just got paranoid feeling other stickers laying around and they were more smooth when laminated and thought to myself I was doing things wrong if I didn't laminate. But yes your response is super helpful thank you!

@DoodlesnTea

Жыл бұрын

@@jasminegutierrez4545 haha I've totally dunked my stickers in water to test them too 😂 I also do make a disclaimer in my listings that although they can handle some water, I don't recommend them being placed on bottles that go in the dishwasher (for example). That way IF buyers are upset about it fading you have your disclaimer as back up 😂

@jasminegutierrez4545

Жыл бұрын

@@DoodlesnTea So wise, thanks again Nat!

Hello! Do your colors turn out alright when using PNGs? I usually work in CMYK because I heard it’s better for printing, but I noticed that PNGs only support RGB color. I’ve been using JPGs because they support CMYK but Silhouette Studio still makes my colors look funky haha T_T

@DoodlesnTea

10 ай бұрын

There is definitely a different for CYMK and RGB files haha that's strange though. I just checked and my png files are all in CYMK but my original procreate file was also in CYMK. Maybe double check that one too! Also sorry it took so long to reply.. I was on a trip >

My cricut is super unsuccessful is silhouette much better?

I can do what with the inset!? I had no idea! Thank you! 😱

@DoodlesnTea

5 күн бұрын

Glad you learned something new :) Hope it is helpful!

Thank you for this wonderful video. You have helped me a lot as a beginner. It can feel so overwhelming when it comes to sticker paper, the cutting machine, etc. may I ask what is the printer you use to print your sticker sheet? Thanks

@DoodlesnTea

Жыл бұрын

Aw thank you! It's definitely overwhelming with so many options out there haha I have the Epson XP-960 but I believe it's discontinued. The newest model should be the XP-970 though!

@hienng9

Жыл бұрын

@@DoodlesnTea thank you ♥️

What printer and type of ink do you ise for your stickers.

Awesome video! Just wondering, how long did it take for the Silhouette Portrait 3 to cut the sheet? Is it noisy? I'm looking to get one myself but I'm torn between this model and the cricut!

@DoodlesnTea

2 жыл бұрын

It took around 2-3mins to cut the sheets I showed in this video. The silhouette IS louder than the Cricut though. It's hard to describe HOW loud it is but it's like machinery gears kinda loud? haha If you live in an apartment with roommates they will defs be able to hear it lol

@Sasusakura2

2 жыл бұрын

@@DoodlesnTea thank you so much for explaining! this gives me a much better idea😁 Can't wait for the next video!

I don't have the sticker paper kiss cut or die cut option... am I doing something wrong?

que impresora es??

This is so helpful. May I know the settings of your kiss cut and die cut

@DoodlesnTea

2 жыл бұрын

I'm glad it was helpful! I currently don't have the machine connected but I'll reply this comment again when I have it set up!

@DoodlesnTea

2 жыл бұрын

Kiss cut: Blade Depth 2; Force 4; Passes 1; Speed:10 Die cut: Blade Depth 4; Force 30; Passes 1; Speed: 10 Hope this helps! The paper I use is on the thicker side though.

Question! How did you get auto cut lines when you input your exported photoshop images? What file did you save from photoshop, PNG?

@DoodlesnTea

Жыл бұрын

By auto cut lines do you mean the white outline around each sticker? If you do, I drew those in Procreate ahead of time. And yes I do save everything as PNG files :)

Hey, can you do a review on "Homsto Premium Printable Vinyl Sticker Paper for Inkjet Printer - Glossy" vs "Homsto Printable Vinyl Sticker Paper for Inkjet Printer Glossy"? Thank for info!

@DoodlesnTea

2 жыл бұрын

Hi there! I didn't even know there was a PREMIUM version now haha I'll definitely have to check that out!

Hello! Im just wondering, does the silhouette also have something similar to Cricut’s print then cut? I cant really imagine how it’d turn out if you print then cut them separately since the layout might change…

@DoodlesnTea

10 ай бұрын

Yes! When it prints, it "merges" all your cut layers so it's not like it's printing each cut layer on a separate piece of paper.

How much for the size of sticker ???

Hi i have a question hope you reply. So you have to download the silhouette app on your computer ???

@DoodlesnTea

10 ай бұрын

Yes! You can download it off the official Silhouette website :)

Can i ask what Cute cutting machine are you using for that?

@DoodlesnTea

10 ай бұрын

The cutting machine is the Silhouette Portrait 3~

Hi, may i ask what printer do you use for printing the stickers? Thank you very much

@DoodlesnTea

10 ай бұрын

I use the Epson XP-960 but I believe the newest model is the XP-970!

Hi! firstly, thanks for making this tutorial, it's super helpful :) I'm printing stickers for the first time but there's one issue. When I send the file to print via Silhouette Studio, it turns my designs suuuper pixelly and ugly. Do you know if there's a way arround it?

@DoodlesnTea

Жыл бұрын

Thanks for watching ^^ Hmm... it might have to do with your printer settings through your computer! I know at least for mine, when I hit print via silhouette studio, it brings up a pop up for my own printers. I select "Properties" for the printer and you can choose the paper type and quality of the print. After click "Apply". I'm not sure if this shows for every printer but worth checking out! Hope it helps :)

@HungerGamesFanatic11

Жыл бұрын

@@DoodlesnTea ahhh thanks for such a prompt response! That indeed upped the quality but unfortunately I also think I have a not-great printer so I guess I’ll get a new one that specialises in photo printing 😅

@DoodlesnTea

Жыл бұрын

@@HungerGamesFanatic11 yay! Glad to hear it kind of helped 😂 I've also recently downloaded the driver for my Epson printer off the Epson website and got a lot of options for customization so maybe there's that option to try for you too! But hey maybe a new printer is also a thing 😂 good luck!

Hi! what settings in Portrait do you use for your sticker sheet? When testing to peel off a sticker the matted sticker is stuck to the backing sheet :(

@DoodlesnTea

9 ай бұрын

Here are my settings: Kiss cut: Blade Depth 2; Force 4; Passes 1; Speed:10 Die cut: Blade Depth 4; Force 30; Passes 1; Speed: 10 Hope it helps~

Hello! I have a question for you.. do you put any lamination sheets on top of your sticker paper? Or do you use any other method to protect your stickers? Or do you just use them as as it is?🧐 curious sticker beginner

@DoodlesnTea

Жыл бұрын

Hiyoo! I do not use any lamination sheets for my stickers and I haven't found any problems with them :))

@veranguyen9754

Жыл бұрын

Thank you for answering! My vinyl sticker paper wears out.. that’s why i’m using lamination. What kinda sticker paper are you using?❤️

@DoodlesnTea

Жыл бұрын

I use the sticker paper from Homsto! I have an affiliate link in the pinned comment if you're interested in trying them :)

have you had problems with the registration mark failing to be read? how often does it happen?

@DoodlesnTea

Жыл бұрын

I do and I've heard that has to do with the versions of Silhouette Studio. I was on a version that worked perfectly and one day, accidentally updated it and now it asks me to manually register it once in a while :(( Sadly I don't rmb the previous version I was on >

hi ! Thank you for making such an amazing video C: it is so helpful for a newb like me. I'm still learning a lot with silhouette, i have a question if you dont mind at all :D i was wondering how do you get such a clean perfect cuts? mine is really noticable and i think sort of ragged. do you think i should get a new blade for the silhouette? i think my blade might be really dull from previous bad sticker paper:( am not so sure if that's because the blade perhaps or the sticker cut settings. i'd really appreciate it if u could get back to me:D thank you!

@DoodlesnTea

2 жыл бұрын

Hiyoo! Thanks for checking out my video :)) There are two things that comes to my mind that might be the problem. First, like you said, it might be the blade especially if it encountered some bad sticker paper previously. I'm not sure about the Silhouette, but when I had the Cricut, a dull blade wouldn't make the lines ragged but just wouldn't cut all the way through :/ Second would be maybe double check your drawing. Really zoom into the drawing's edges to make sure the lines are smooth and not have any bumpy edges. I had this issue before in the past where the pen I was using in Procreate didn't actually have a smooth edge when you zoomed in to look which caused the machine to cut bumpy lines. If it helps, I use the round brush in Procreate to draw all my white borders on my stickers. Hope this helps :))

I bought the homesto paper and no matter how long I let it dry, the ink smudges. It can be literal days later and it just rubs off. Am I supposed to be putting a clear seal paper over it? I’m so confused.

@DoodlesnTea

10 ай бұрын

Oh no that's so strange :(( Did you make sure you got the correct type for your printer? Like inkjet for inkjet printers and laser for laser printers?

Does your holographic laminate not get scraped when you apply it? Mine gets scuffed lines when I use a flat edge to smoothen the surface, I feel like I can’t sell my stickers 😅

@DoodlesnTea

Жыл бұрын

Haha not really 😅 my ruler edges are rounded so they don't really scrape the holo adhesive. Just enough pressure to push out any bubbles.

@youngneil6456

Жыл бұрын

@@DoodlesnTea darn, i guess i just have to practice more or find a new holographic overlay haha. thanks for your input! :)

Hope you reply, I'm want to buy sticker cutter to but still on hold cuz dont know which one works best, portrait or cameo. Hope for your opinion on both this machine.

@DoodlesnTea

Жыл бұрын

Hi there! I don't actually know much about the cameo besides the fact it has a bigger cutting mat (I believe 12"x12"). I picked the portrait because I'll only ever be cutting paper that's letter size (8.5"x11") so I could save space with a smaller machine.

@strawberrymilkshake6229

Жыл бұрын

@@DoodlesnTea ooo ok. Thank you so much for replying ❤️

Where did you get that holographic laminate from

@DoodlesnTea

2 жыл бұрын

I got them off Etsy :)) You can just look up "holographic self adhesive" and different ones should show up!

May I know the pressure that you use for both normal and laminated stickers? 😊 Thanks!

@DoodlesnTea

Жыл бұрын

I have the settings listed in some of the other comments on this video :))

@loeypop4194

Жыл бұрын

@@DoodlesnTea Ahhh thank you so much!!!

I have a question. My s.studio keeps on changing the color on the stickers every time I hit print. Do you know anything I could do ? (:

@DoodlesnTea

Жыл бұрын

Hmm I'd maybe check your printer settings through your computer instead of through Silhouette Studios. Sometimes it'll override your print settings!

Have you had trouble cutting stickers with the silhouette portrait 3 with the auto blade. I just purchases for my granddaughter and I see in reviews a lot of people have trouble cutting their stickers. Thanks

@DoodlesnTea

Жыл бұрын

Hello! When you say having trouble cutting stickers do you mean cutting through the paper?

@marybraswell7784

Жыл бұрын

@@DoodlesnTea yes, I have read a lot of reviews on trouble with auto blade cutting problems.

@DoodlesnTea

Жыл бұрын

@@marybraswell7784 oh interesting.. I've never had this problem before 🤔 maybe try increasing the blade pressure by a lot and see what happens? Sorry I'm not too sure

I wanted to ask that I tried finding the app but I couldn't find it, which app is this? And in what age you started making stickers and selling them?

@DoodlesnTea

Жыл бұрын

Do you mean the app that I use to draw my stickers? It's called Procreate and unfortunately, it is only available in the Apple Store :( I also started making and selling stickers in my mid-twenties haha I started rather late compared to other shop friends

@akshitarathore4354

Жыл бұрын

@@DoodlesnTea you've done hard work :)💗, I hate when the app is only available in play store or Apple store hahaha. And also what is the silhoutte portrait app?👀

@DoodlesnTea

Жыл бұрын

@@akshitarathore4354 Yeahh I've sold my soul to Procreate already so the Ipad I have is literally the only apple product I have haha Also the Silhouette app is just Silhouette Studio and you can download it off the Silhouette website :)

Hi, what is your blade settings for kiss cut and die cut? Thank you!

@DoodlesnTea

Жыл бұрын

Hello! These are my settings: Kiss cut: Blade Depth 2; Force 4; Passes 1; Speed:10 Die cut: Blade Depth 4; Force 30; Passes 1; Speed: 10

@wufaned6449

Жыл бұрын

@@DoodlesnTea thankyou so much! This video was helpful and I get it to cut perfectly 😊

So sorry is it the a normal printer you’d use to print the stickers out?😢

@DoodlesnTea

10 ай бұрын

The Epson XP-960 is market as a photo printer I believe.. Originally I got it for art prints but I was too lazy (and poor huhu) to get a separate printer just for stickers. It's worked fine for me though in terms of colour!

Did you swap over from Cricut because the calibration tool doesn't even help with cut accuracy and experiencing timeless misaligned cuts? I just bought an Air 2 and regret it now because this is exactly my issue...How have you found the Silhouette?

@DoodlesnTea

2 жыл бұрын

There were a few reasons why I switched from the Cricut to Silhouette: 1) The cut area allowed in Silhouette is larger than Cricut --> you can use up more of your paper 2) Cut accuracy --> my Cricut was fine by the end of it but sometimes it would just go WAY off. I'd say it's more accurate in Silhouette though 3) Cut speed --> Since you can set different blade pressures in Silhouette, it makes cutting everything much faster (kiss cut stickers and then die cut the border of the sheet). 4) Smaller in size --> it's like half the size of the Cricut The Silhouette IS LOUDER (oof) but it doesn't run as long and I get more sticker sheets made in the time frame so for me, I personally do not mind. I really haven't looked back though after I switched! For your calibration problem, I might have had the same thing. I don't actually use the calibration sheet from Design Space directly. I downloaded a new one that I found from this blog: heyletsmakestuff.com/print-then-cut-calibration/ Ever since I started using this one, my cuts were a lot more accurate so maybe it's something you can try! Unfortunately you'll still have to print out the one in Design Space during the calibration process but I just use that as scrap paper on the side. When they ask to insert the calibration sheet into the machine, just put in the new one. Sorry for this really long reply haha I wanted to make sure I covered everything. Hope this helps :))

@galacticgummybearzzz

2 жыл бұрын

@@DoodlesnTea @DoodlesnTea Thank you, I appreciate your detailed reply. So overall you find the cuts to be more accurate, even with software updates etc? I tried calibration for my cricut with the PDF print out but it didn't change anything...I can tell if it is my printer settings either because I don't have am "actual size" option, just scale from 0 - 100%, scale to fit fill entire page and scale to fit fill entire paper..so I wonder if scale to fit is the option that best represents actual size, gap technology!

@DoodlesnTea

2 жыл бұрын

Oh interesting.. yeah I've heard from some people it's a printer "scale to fit" calibration issue too which makes it really annoying :(( I've heard also giving your machine enough light also sometimes helps with it reading the sensor lines more accurately too?

my silhouette portrait 3 cuts sooo wrong. especially on the bottom right. the cut line moves to the right and up. and calibration does not fix the problem. does anyone know how to solve this? or just give up?

@DoodlesnTea

Жыл бұрын

Oh no :( Sorry that's happening! I'm not quite sure why but I hope someone who sees your comment can help out!

Hi, i tried following your suggestion using page setup and asjusting to the max of inset to use the whole paper, however the lower registration marks are not showing when printing that causes to "registration failed" please help and if you can show a tutorial please on how to adjust inset and at the same time what should be the machine, cutting mat & media size please. thank you in advcance

@xrtisansart1381

Жыл бұрын

oh by the way, i dont have procreate and adobe, i'm just using canva then download design to silhouette studio : )

@DoodlesnTea

Жыл бұрын

Hi there! Hope this can help answer some of your questions: Machine: This should be which Silhouette cutting machine you have Cutting Mat: The size of your cutting mat. The numbers on your mat tell you the size Media Size: I keep mine at Letter (8.5"x11") which is the size of standard printer paper. Maybe your media size is too big so it doesn't print the bottom registration marks onto your paper. Under the same tab to adjust your inset, you can also adjust the length and thickness of your registration marks too. Maybe try playing with those settings if the other solutions don't work. I hope that helps! I've never personally had that problem before :((

Does the machine automatically cut around each sticker?

@DoodlesnTea

10 ай бұрын

Yes it does! It auto detects the file and will cut around it :)

why can't i pick the "kiss cut" option? i have the same machine as you. i only see auto (cut), cut and sketch.

@DoodlesnTea

Жыл бұрын

My kiss cut setting was a custom setting. I've left the blade settings in some of the comments on this video 😊

How did you set the different colors for the line color. I cannot seem fir gure out hwo you did that. The software automatically sets all my layers to red. ANy tips?

@DoodlesnTea

Жыл бұрын

Hi there! It's that red square line box on top of your project tab. I show briefly where it is at the 9:30 timestamp :) Hope it helps!

@rshelly

Жыл бұрын

@@DoodlesnTea This helped a bunch. Thank you!

Whenever i import sticker files from etsy there is no border, is there a way to add it?

@DoodlesnTea

Жыл бұрын

Do you mind explaining what you mean by importing sticker files from Etsy?