How I make Neon LED signs using a CNC and no glue | Tutorial | How To
www.amazon.com/shop/loveandly...
Check my storefront for info on neon LED kits, angle and cap cutting tools, my favorite soldering iron, wire cutters, and more!
DISCLAIMER: This description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support! Everything in this video is based on information I have learned from online resources and my experience. Please do your own research as you and only you are responsible for any and all decisions you make. Thank you for watching!
Пікірлер: 115
I appreciate this tutorial and the different way of doing it. I love the idea of being able to buy these lights in bulk and then change out then separate colors for the silicone cover. To me, this seems more cost effective rather than buying a bunch of lights in different colors. Wiring seems much cleaner, too.
Your video is awesome, I will try it for my project, thank you.❤❤❤
Thanks so much for this great tutorial! I always wondered how these lights were made! Super cool! (And kudos to you for both routing & soldering!) You are talented, and the sign looks GREAT!
@LoveandLyteSignss
5 ай бұрын
Appreciate it!
Awesome tutorial and thank you for the Amazon links. I was having a hell of a time trying to find the right silicon diffusing tube.
@LoveandLyteSignss
5 ай бұрын
Excited to see what you come up with! Come back and share!!
That's excellent. I will definitely use the separate LED strip and plastic cover next time, those corners are really sharp! Thanks!
@LoveandLyteSignss
3 ай бұрын
Thanks! Best of luck!
A tutorial on how you use inkscape would be lovely :)
Thank you
@LoveandLyteSignss
3 ай бұрын
You’re most welcome!
This is amazing! Thanks so much, If someone wanted to put the power cord through the back of the sign where would you recommend drilling the hole so the sign looks clean?
@LoveandLyteSignss
3 ай бұрын
You could drill through the channel and feed the wiring through the back. Then just overlap the LED strip to hide where the wiring is coming out!
Can you share with us the thickness pf the engrave you did and how you connect the led light with an adaptor of light
Can I ask what type of font you use to have the even size through out the text, to fit the silicone? Also, what led and silicone do you use? Thanks so much, signs look awesome!
Hey Mia! Thank you SO much for these videos!!! If you have time could you make a detailed soldering video? I’m sooo intimidated by soldering! Thank you so much!!!
@LoveandLyteSignss
Жыл бұрын
That’s a great suggestion! I will work on it! It can be intimidating, but it can be done!! I felt the same but remembered my middle school tech class days when we had to solder one light on a circuit board!! I figured if my 8th grade teacher could help us, I could relearn how to do it now yearssss later! Lol
@AC-sn7fz
Жыл бұрын
@@LoveandLyteSignss hahaha yaaasss!! I was trying to call on my school days of soldering too! I guess there ain’t nothin to it but to do it! Thank you for the encouragement!!! Can’t wait to see more videos from you! 💜
@LoveandLyteSignss
Жыл бұрын
@@AC-sn7fz that right there!!!!! It’s the secret!!! Everybody started somewhere!!! Stay tuned!
@AC-sn7fz
Жыл бұрын
@@LoveandLyteSignss hey Mia! I have a quick question. What wire are you using to solder the led strips? It looks so thin and doesn’t look wrapped in anything lol are my eye going bad? Thank you! Can’t wait for my videos! 💜
@tylinxiong3683
Жыл бұрын
How did you solder?
hi ,that is so great video
@LoveandLyteSignss
Жыл бұрын
Thank you!
I like these as opposed to the traditional neon flex. How do I find these style led?
What speed did you cut the plexiglass at because I'm having a problem with it melting the plastic and it's a pain to clean it all out of the groves?
Did your plug come with your lights or do you have a link to the one you used?
Great video, I have used tried to find the product you are using with no success can you give the links pleasethank you very much
I can’t find the silicon insert anywhere online in the uk, they all have leds inside! Where can I get this?
What settings do you have for your end mill and also what cut pattern do you add i cant figure it out 😭
What type of bit do you use when doing the grooves?
Hi, i didn't get clean cuts. What speeds do you use?
Do you have sources for the separated lights now that Amazon isn’t carrying it?
Where did you get the silicone cutting tools, I don’t see them on your Amazon list. Thanks!
How did you trace the cursive font on Inkscape?
Can you post the info about your CNC setup? I also prefer the detail of "neon" signs using separate LEDs and silicone rather than the other type. I like your machine setup.
Hi can u make a vidéo review your cnc please?
Are you using a slotting bit to cut the channel in the acrylic or just a regular straight bit? It seems like the silicone will stay in the groove either way?
May I ask .. how hard is it to learn how to use the makersmade cnc ? I’ve been wanting to get one but wanted to talk to someone who has it
what wire do you use to make solder connections?
Thanks for the very helpful video. Can you tell me if covering the LED's with the thin wires will dim the covered LED's a lot where you can notice dark spots when they are covered with the silicone diffuser or is it best to place the wires to the sides of the LED's so they won't obstruct them?
@LoveandLyteSignss
Жыл бұрын
I would make sure the wires are on the sides. More noticable on the white, but when it's photographed there isnt really a noticable difference.
Hi thanks for the great tutorial! Can you show greater detail on the soldering process for a newbie? (Slow that part down)
@LoveandLyteSignss
Жыл бұрын
I recorded it months ago and haven't gotten around to posting!!! Will circle back soon with it!
I am trying to order the silicone from the website but I am having no luck. Any insight ?😊
I’m looking for the silicone would you mind sharing a link
Hi Awesome video. I want to experiment with the neon signage do you create files for others?
@LoveandLyteSignss
Жыл бұрын
I do not at the moment. There are many different methods to making these, and people use different programs. I have shared files with friends and they have not always worked without needing to be altered.
How do you make this text suitable for CNC in Inkscape?
Hi! Love the vid. Where do u get your acrylic and how thick is it?
@LoveandLyteSignss
10 ай бұрын
Acrylic is sourced locally. Reach out to your local plastics supplier. I use 1/4" thick acrylic.
Pls share link of all products silicon and led and its cutting tools etc where too buy
@LoveandLyteSignss
Жыл бұрын
Split Neon LED starter kit: amzn.to/400hyyB • New generation neon LED router bit: amzn.to/421yExx • 24 AWG or Smaller Electrical Wire • Soldering Iron: amzn.to/3J9MBku • Flux: amzn.to/3FccA9K • Wire Strippers: amzn.to/3T6xugv
what is your cnc set up?
Nice tutorial! I see you used Inkscape for the drawing. What program do you use for the CNC to do the cuttting with? How difficult was it for you to lean this on a scale from 1 to 10. Any good videos on how best to use the Inkscape. I have supported you buy purchasing though the links you provvied. Thank you
@LoveandLyteSignss
Жыл бұрын
Hey! Awesome! I use Inventables Easel and the Makerverse software that came with my CNC! I am working on a tutorial and will circle back. It has just been crazy with the summer and signs!!
Thanks a lot for the video! How thick is your acryl glass and how deep do you mill the grooves?
@LoveandLyteSignss
2 ай бұрын
Thanks! I use 6mm thick acrylic for most signs with a 4.2mm groove!
@BromBarium
2 ай бұрын
@@LoveandLyteSignss thanks a lot for the quick reply!
@LoveandLyteSignss
2 ай бұрын
@@BromBarium you’re welcome! Good luck on your project!!
Hi! what brand of cnc cutter are you using?
@LoveandLyteSignss
3 ай бұрын
I have a Makermade M2
hi nice job what's te deep you give for the Chanel on acrylic?
@LoveandLyteSignss
Жыл бұрын
Channel is 4.3 mm deep.
what router do you use? i have a makita and dewalt, but cant find an adapter to fit the 8mm bit. Thinking i need a new router at this point..
@LoveandLyteSignss
2 ай бұрын
I have a rigid. You can buy a collet adapter, or just get the bits that have a 1/4” shank.
Hi awesome tutorial. where do you get your stuff now. It looks like Amazon isn't stocking it anymore?
@LoveandLyteSignss
Жыл бұрын
Hey Tim! My adapters have been on backorder!!! I can provide everything else if you want to email me, I can send an invoice. I will circle back when I get my full kits back in stock!!
@brianaward531
Жыл бұрын
I would like to order! What is your email?
What are your router settings for the plunge speeds, bit speed, etc?
@LoveandLyteSignss
Жыл бұрын
I plunge at 5 and run 12” per min or so. Really depends on your machine and router. I had to play with it for a while.
What wire do you use to solder the strips together? Have a link? 🙏🏽
@LoveandLyteSignss
Жыл бұрын
I would recommend 22 gauge wire! Check my amazon store for a link!
hello, How do you get those neon flex hoses?
@LoveandLyteSignss
Жыл бұрын
I have them in my amazon storefront! I have updated my link so it should take you to them!
I’m interested in having a sign made, how can I contact you?
Can you list the products you use? Or where you get the silicone?
@LoveandLyteSignss
Жыл бұрын
Split Neon LED starter kit: amzn.to/400hyyB • New generation neon LED router bit: amzn.to/421yExx • 24 AWG or Smaller Electrical Wire • Soldering Iron: amzn.to/3J9MBku • Flux: amzn.to/3FccA9K • Wire Strippers: amzn.to/3T6xugv
@LoveandLyteSignss
Жыл бұрын
Split Neon LED starter kit: amzn.to/400hyyB • New generation neon LED router bit: amzn.to/421yExx • 24 or Smaller Electrical Wire: amzn.to/3F8HOyA • Soldering Iron: amzn.to/3J9MBku • Flux: amzn.to/3FccA9K • Wire Strippers: amzn.to/3T6xugv
How thick is the acrylic you use ?
@xienancy753
Жыл бұрын
this type of acylic is >=6mm thickness will be ok ,router bit cut depth is 4.2mm
Hi, what type of wire do you use to connect the lights to each other?
@LoveandLyteSignss
Жыл бұрын
I suggest 24 AWG or smaller!
@MrRamos1903
Жыл бұрын
But what is that super thin cable?
Is there a special bit that you cut the groves with
@LoveandLyteSignss
Жыл бұрын
There is! It routes out a groove that is 8mm wide and then 6mm at the top to allow the neon LED lights and strips to fit securely in the groove. Here is the link to it on my amazon! amzn.to/41isVlw
What is the deep of the bit for the led strip
@LoveandLyteSignss
3 ай бұрын
4.2mm
What is the space between the outline of the sign and the actual neon light?
@LoveandLyteSignss
9 ай бұрын
Just eyeballed an offset til it looked right!
What bit do you use? Nice job
@LoveandLyteSignss
Жыл бұрын
I use a special 6mm bit made specifically for split neon LED signs! I just listed: 6mm Routing Bit and Collet for Split Neon LED Lights, for $60.00 via @amazon www.amazon.com/gp/product/B0BRWNV9S8/ref=cx_skuctr_share?smid=A1XN8Q8TPURRE3
@valaness
Жыл бұрын
Awesome video. How deep do you have to go to fit the led and strip?
@LoveandLyteSignss
Жыл бұрын
@@valaness 4.2mm is what is recommended for the groove. I take it down to 4.3 with my bit zero’d just enough to take the paper masking off. I found sometimes with 4.2 the ridge would sometimes be too fragile.
How wide do you made the lines?
@LoveandLyteSignss
3 ай бұрын
The lines are 6mm wide.
Can you give link for cutting machine you used to cut out name
@LoveandLyteSignss
Жыл бұрын
I have a @makermadeCNC. makermade.com/products/2021-m2-cnc-kit
I wanna know where you got the machine
@LoveandLyteSignss
10 ай бұрын
It’s a makermade cnc
hi sir u selling led light only
how to contact you
Hi, i am interest your l e d creation, so how can i do cuting device in my country?
@LoveandLyteSignss
Ай бұрын
It’s a makermade CNC. Not sure about shipping outside of US. Sorry!
Pls share font name and engraving size pls
@LoveandLyteSignss
Жыл бұрын
The font is cream candy and the engrave is 6mm at a depth of 4.2mm!
Hello, can you share the font name? thanks.
@LoveandLyteSignss
Жыл бұрын
The font is Cream Candy!
Would you be interested in doing a design and sending me the file? I’d be willing to pay you of course. Thanks
@LoveandLyteSignss
Жыл бұрын
Send me an email! mia@loveandlytesigns.com
You need to be enough helpful and generous and show the people how to do that in inscape not cutting out vedio and show only results. This way your channel will not chatch people eyes.
You should talk louder
@LoveandLyteSignss
Ай бұрын
Ok!