Carving and Molding 5 Bic lighter cases. For the very beginners.
Жүктеу.....
Пікірлер: 29
@rogersmith5947Ай бұрын
Your mold worked great. Thanks Jordy.
@kjirstenboucher9682Ай бұрын
You did an awesome job with the mold! 👍 Nice that you had the degassing pot n pressure pot to help with the process. The lighters came out looking great too! Thanks for sharing this.😊💖💯
@timothyreed200Ай бұрын
heck yea that is super cool!! just too cool!! and Awesome cases as well!!! Can't wait to see what else you can create along the way!! that bronzing idea sounds wicked!! thank you for the video!!!! Stay safe!!
@scottandsherАй бұрын
Perfect. Super cool Jordy. I really like the copper with patina look too. Great job!!
@markduggan3451Ай бұрын
Nice job. Well done.
@spikewillow4552Ай бұрын
They all look mint bro 💪🏼 worked a treat 💯success 🤘🏼🤘🏼🤘🏼n that guy you showed me is bang on defo lots of kit needed but amazing results 🖤💪🏼
@ahuss80Ай бұрын
Great job! Gives me some ideas…
@jamesrankin9833Ай бұрын
Turned out perfect, you couldn’t ask for it any better! Like you said, all that epoxy sh*t ain’t cheap! I’m thinking, now that you can semi mass produce them, no less than 50 bucks for a signed reproduction. I’m glad I got mine before you started making molds, because no one will ever have one like mine!😂 I know you don’t remember what’s on mine, and I’ll never tell you😂😂 actually mine was supposed to be Your Dads! Thanks DadDad!👍🏻👌🏻 Now, when you make a one of a kind, signed Jordy Johnson signature series lighter case 100.00+ all day!….. Good stuff!
@CarvingFusion
Ай бұрын
Lol thanks james
@midnight4540Ай бұрын
Really cool , I could use one? Nicely done, take care!
@no1init253Ай бұрын
⭐️🔥⭐️🔥⭐️🔥⭐️🔥⭐️
@markanthony559Ай бұрын
Awesome Jordy 👍👍👍 I've got a steel one with a grim reaper on it and that cost $5 New Zealand dollars. So I guess see if anyone else is selling them and go off their prices.
@ktjwilliamsАй бұрын
Rising your horizons !! Nice for a little change of pace ... Just keep up with your bread and butter .. $ 2.00 plus shipping
@AmyJo143Ай бұрын
😮🧡✌️
@AmyJo143Ай бұрын
This is an absolutely wonderful creations, Jordy ! $25 or more.
@CarvingFusion
Ай бұрын
Thanks amy ill make sure u get a Carved one soon
@AmyJo143
Ай бұрын
@@CarvingFusion woot woot 🙌
@patriciawaterman9764Ай бұрын
Great job! I guess you’d have to figure out how much time and labor you have in to the item to know about how much you should charge. Anything handmade though people are usually willing to pay a little bit more for it. Thanks for all the info.😎
@DadDad-uo4nwАй бұрын
Dude they came out so awesome. Great video. Jordy does. Don't shit your pants. Lol 😅😊
@CarvingFusion
Ай бұрын
Lol :)
@johncottle446420 күн бұрын
Rather you f*** it up and I watch than I f*** it up and destroy my shop!😎
@glynelwell1879Ай бұрын
try e cig holder jorgy
@postalchic876020 күн бұрын
Just found this the cases are awesome !! I saw the mixture for the mold what about the epoxy what brand do you use ?
@CarvingFusion
20 күн бұрын
Any epoxy will work finr
@sarafoss9990Ай бұрын
Do you use dried wood for carving? How do you get it so the carvings don't darken over time? Any help is appreciated
@CarvingFusion
Ай бұрын
For dremel caring yes I like to use fairly dry wood, and a clear spray coat can keep the color rich,
Пікірлер: 29
Your mold worked great. Thanks Jordy.
You did an awesome job with the mold! 👍 Nice that you had the degassing pot n pressure pot to help with the process. The lighters came out looking great too! Thanks for sharing this.😊💖💯
heck yea that is super cool!! just too cool!! and Awesome cases as well!!! Can't wait to see what else you can create along the way!! that bronzing idea sounds wicked!! thank you for the video!!!! Stay safe!!
Perfect. Super cool Jordy. I really like the copper with patina look too. Great job!!
Nice job. Well done.
They all look mint bro 💪🏼 worked a treat 💯success 🤘🏼🤘🏼🤘🏼n that guy you showed me is bang on defo lots of kit needed but amazing results 🖤💪🏼
Great job! Gives me some ideas…
Turned out perfect, you couldn’t ask for it any better! Like you said, all that epoxy sh*t ain’t cheap! I’m thinking, now that you can semi mass produce them, no less than 50 bucks for a signed reproduction. I’m glad I got mine before you started making molds, because no one will ever have one like mine!😂 I know you don’t remember what’s on mine, and I’ll never tell you😂😂 actually mine was supposed to be Your Dads! Thanks DadDad!👍🏻👌🏻 Now, when you make a one of a kind, signed Jordy Johnson signature series lighter case 100.00+ all day!….. Good stuff!
@CarvingFusion
Ай бұрын
Lol thanks james
Really cool , I could use one? Nicely done, take care!
⭐️🔥⭐️🔥⭐️🔥⭐️🔥⭐️
Awesome Jordy 👍👍👍 I've got a steel one with a grim reaper on it and that cost $5 New Zealand dollars. So I guess see if anyone else is selling them and go off their prices.
Rising your horizons !! Nice for a little change of pace ... Just keep up with your bread and butter .. $ 2.00 plus shipping
😮🧡✌️
This is an absolutely wonderful creations, Jordy ! $25 or more.
@CarvingFusion
Ай бұрын
Thanks amy ill make sure u get a Carved one soon
@AmyJo143
Ай бұрын
@@CarvingFusion woot woot 🙌
Great job! I guess you’d have to figure out how much time and labor you have in to the item to know about how much you should charge. Anything handmade though people are usually willing to pay a little bit more for it. Thanks for all the info.😎
Dude they came out so awesome. Great video. Jordy does. Don't shit your pants. Lol 😅😊
@CarvingFusion
Ай бұрын
Lol :)
Rather you f*** it up and I watch than I f*** it up and destroy my shop!😎
try e cig holder jorgy
Just found this the cases are awesome !! I saw the mixture for the mold what about the epoxy what brand do you use ?
@CarvingFusion
20 күн бұрын
Any epoxy will work finr
Do you use dried wood for carving? How do you get it so the carvings don't darken over time? Any help is appreciated
@CarvingFusion
Ай бұрын
For dremel caring yes I like to use fairly dry wood, and a clear spray coat can keep the color rich,
@sarafoss9990
Ай бұрын
Thank you very much
How did you get so many colors on your pour?
@CarvingFusion
Ай бұрын
Used 3 diffrent micro powder colors