Heads up: I'm not the first person to do try to do this - if you want to be entertained with some good lulz you should check out the OG steel toed crocs from I did a thing: kzread.info/dash/bejne/ZG2dpZiLnMWyZ9Y.html

@nonconformist4802

4 жыл бұрын

My 2 cents 1st, You are damn good in what you are doing and I loved your video 2) I would take that wood block shapes and cast aluminum blocks from them that will be much cheaper to do if you use some scrap alu for the job. A home alu casting setup cost next to nothing and that will expend your visions unlimited.

@jonathanorlando1294

4 жыл бұрын

This guy does a thing and the metal doesn't fold. kzread.info/dash/bejne/opOcxI-EltioZrA.html Don't know if this helps. Also, in manufacturing they often pre-bend the sheet metal to help hold it in the die, as well as align it properly. Maybe a combination of dies would work better?

@TheZooloo10

4 жыл бұрын

You know you have to make him a pair and send it to him now.

@BESHYSBEES

4 жыл бұрын

I did a thing is one of my favourites he is strange Aussie but very humorous

@79Gravity

4 жыл бұрын

be the first to do it with kevlar :) easyer to shape, might even work - then the outside can be fully covered, you just want the croccy insides anyway

Mate, we should have a dance off!

@quadrupleheart

3 жыл бұрын

How is this not getting more attention?

@saltgame5823

3 жыл бұрын

@@quadrupleheart no clue

@maximilienfilion7802

3 жыл бұрын

I did a thing saw your video too

@rustywarships1710

3 жыл бұрын

bruh, a crock dance party

@nelkfans8985

3 жыл бұрын

Love your vids

*at job interview* "Oh I heard you've done some projects of your own! Care to share them?" *Lifts foot into table* S t e e l - t o e d c r o c s

@Gr3nadgr3gory

3 жыл бұрын

I'm hiring you just so I can fire you.

@nokatchi

3 жыл бұрын

Hire 100

@sixkeiii

3 жыл бұрын

"Give this man the the job, this is revolutionary!"

@eid6584

3 жыл бұрын

same energy as Flint from Cloudy with a Chance of Meatballs

@Dogpool

3 жыл бұрын

Eid spray on shoes

The key to avoid the folding is to make it in steps, increasing the depth of the mold each time. I think there is even theoretical formula to know how many steps you have to do.

@Helperbot-2000

2 жыл бұрын

Like how aluminium cans are made!

@thatsomeone3818

2 жыл бұрын

Yea you need to look up a cold working formula to find the number of steps.

@deeeyewhy5949

Жыл бұрын

@@thatsomeone3818 but he wants to do it in one press because…. It’s faster!

@chrisoakey9841

11 ай бұрын

The alternative is more force. If you clamp with 50ton, it doesn't slide as much, the metal stretches more around the form. So more lube, and clamping force will help. Second the time taken to press affects the amount of stretch v slip.

I'm so addicted to this channel. The fact that failure is the process helps me in my every day life. Everything about the format of this channel is amazing. Thank you

@michaelkappel8224

2 жыл бұрын

It's amazing how much your life will change when your relationship with failure changes.

@demetriajones3231

7 ай бұрын

@@michaelkappel8224 honestly

Nice Shane! Great to see the whole learning process.

@adamvalt6609

4 жыл бұрын

it's great that you support him

@kaden56

4 жыл бұрын

Do you know him personally mark?

@patrickmcdermott06

4 жыл бұрын

Hi Mark!!!

@lukeb1288

4 жыл бұрын

how does Mark rober only have 50 likes and 3 comments lmao also weird that Mark rober sounds like mars rover....

@jimmysavile69

4 жыл бұрын

69th like

"I never claimed to know what I'm doing... I just know what I'm trying to do" Oddly profound. I like it

@dragojuice8716

4 жыл бұрын

being a beginner programmer, I live by this, it even happens like that when im working with my dad on home repairs/remodeling

@guywith_dog

3 жыл бұрын

@@dragojuice8716 as an intermediate programmer i also rely on it lol

@thomasrobinette3227

3 жыл бұрын

@@guywith_dog as an expert programmer I have abandoned this and now I do claim that I know what I'm doing.

@ramseydarkstar

3 жыл бұрын

My life story 😂

@jwblotr

3 жыл бұрын

@thomas robinette Only because if you didn't claim to know what you are doing, could you really call yourself an expert programmer? Let's be honest here, even as an "expert" do you really know unequivocally what you are doing all the time or do you still have to fumble through till you get to the right idea sometimes too?

I used to work in an automotive press shop. We made parts for BMW. From my experience I can tell you that pressing the part in one go is not the best method. The way the presses worked in the automotive field is that they used a step method. The part was stamped out bit by bit using large rolls of sheet metal. The stamp would come down on one part of the metal & make a shape into it. Then the moulds would open up on top & bottom & the sheet metal would me moved along to the next stamp. So on & so forth until the final part was clipped off at the end of the run. This would prevent the metal from buckling & would provide a nice consistent form The extra scraps of metal would fall off into a conveyor system where it would be routed to a metal collection bin that would then be remelted & reformed into new sheets of metal. Nothing went to waste.

It's really interesting to look back at this video from just a few years ago and note how much Shane has built up his chops as, honestly, an entertainer.

@RedHair651

Жыл бұрын

I thought the same

@IntoDeathandTheBuddahMatrix

7 ай бұрын

The use of honestly is awkward and unnecessary. Adverbs modify verbs, adjectives, and adverbs. The adverb is not modifying anything.

@jameshoffa7085

6 ай бұрын

@@IntoDeathandTheBuddahMatrix idiot

@LiarJudas666

Ай бұрын

@@IntoDeathandTheBuddahMatrixcomments are generally understood to be more conversational and i think a lot of people just type how they talk. i certainly do. anyway i hear people say “honestly” like this all the time so i hope you’ve gotten over this

"I never claimed to know what I'm doin'. I just know what I'm trying to do." Words to live by 😂

@MatthewAucutt

3 жыл бұрын

This needs to be a shirt!

@MishaDark

3 жыл бұрын

Best quote in a while tbh

@rene_a_morales

3 жыл бұрын

This is such a good quote

3:06 "it took me four or five generations to get this tool mostly working" _the project had begun with my grandfather's grandfather... we know no longer why we toil in the fabrication of this instrument so hideous, but such is our charge_

@rushildasari7502

2 жыл бұрын

this comment is underrated i laughed so hard LMAO

@Muffin.Creations

2 жыл бұрын

LMFAO

@joseville

2 жыл бұрын

Reminds me of how it took so many generations of cartographers from the same family to map out France, and then when they were done, they found out France's area was smaller than their original estimate lol

@mikael2748

2 жыл бұрын

Ha said iterations 🤣

@bahamutbbob

2 жыл бұрын

Read this in Werner Herzog's voice, and it's 100x better.

wait until he finally realizes he has to make a left croc

@16:40 Love that line, "I never claim to know what I'm doing, I just know what I'm trying to do." You've summed up almost everything I've ever done.

"Projects are the star of the show, I'm just the host." That is probably the best quote ever

"I've now succeeded in making 2, pretty ugly pieces of garbage" yeah my mum said the same thing.

@dp4advanced234

3 жыл бұрын

Nice m8

@itzsquishy3712

3 жыл бұрын

True

@danijelandroid

3 жыл бұрын

I'm going to assume you have one or two terrible siblings. 😈😎

@neco5740

3 жыл бұрын

Who is the second one?

@jaydenkuntzman9329

3 жыл бұрын

lol

I love that you make engineering look so attainable to the average mind. You show that it’s okay to fail (so long as you have the materials lol) and that with the right attitude, you can make anything

One of the easiest ways to help control the buckling or wrinkles is to remove material from the area. Put a semi-circular cut-out in the areas with the wrinkling. Less material in the area of the wrinkling gives all that "extra" material somewhere to go with folding over. Experiment with how big the semi-circle should be to make sure that the edge of the circle isn't pulled into a part of the final shape that you care about. Depending on the exact contour, this may lead to the wrinkles forming in the toe portion rather than the clamped area. As Matthias mentioned, draw beads are a huge help in cases like this, especially since you have the capability to machine them in. Since the bead touches the sheet metal first, as you clamp the die together it will hold that area in place and force more of the surrounding metal into the form. This helps spread the distribution of material that you're pulling so that it's not just all the "easy" material at the wrinkle point. More resistance to movement means less flow of material, but be careful not to clamp it too severely or the sheet metal will neck down and eventually split.

when that weight fell off at the shelf at 0:17 , I instinctively moved my foot and stubbed my toe into my desk...

@Gunth0r

3 жыл бұрын

same, wtf bro, I've been getting this more lately with similar video footage and I never did before. Is my brain growing more stupid as I grow old?

@Aedi

3 жыл бұрын

Wouldn't that mean you moved your foot into the way?

@ricky107_

3 жыл бұрын

I wonder what actually happened after the cams cut

@DanteYewToob

3 жыл бұрын

I did that while seeing a movie with my girlfriend a few years ago.. there was an underwater scene and I was eating popcorn and when they surfaced and took a deep breath I did too and I inhaled popcorn and started choking really badly. She saved my ass and when everything calmed down she asked wtf happened and I explained and she was like "Wtf... you're an absolute fucking moron." I was like "Nooo! The movie was just super immersive. They did their job. So did I. I stand by my near death experience." I still do. I'm now single. No regrets!

@thebigtimechannel9927

3 жыл бұрын

Wouldn't have happened if you were wearing steel-toed Crocs!

when he realizes he has to make another tool for the left foot

@yahyamohammed3520

3 жыл бұрын

Underrated

@MrDendor

3 жыл бұрын

Just mirror it

@c15a

3 жыл бұрын

I guess just break the left foot to the right

@LexMc0606

3 жыл бұрын

Shhhhhh... Don't tell him yet, he can figure it out on his own. His IQ is bigger than Mount Everest, he'll figure it out.

@soundgod06

3 жыл бұрын

Really he could probably do it quite well with one tool that has both left and right in a sort of kidney shape. He already added that extra lump on the back to balance the form, might as well make that off cut lump useful.

11:05 , 13:48 , 16:16 , 17:38 love watching the creases form. Its so cool to think how many things deform in this way- clothing when you bend your knees and elbows, towles hanging on a rack, paper you crumple up, etc; all follow the pattern of buckling/folding. I guess this must be the cheapest way for the universe to deform flat surfaces or something? Its so cool

As a mechanical engineer, I think it's pretty cool to see how you iteratively come to a process that's very similar to standard drawing and forming presses! Especially that hold-down plate to prevent material bunching up during the drawing step. Kudos! 😀👊🛠️

@Xiph1980

2 жыл бұрын

Oh, and there's a good chance by now that you're already aware of this process and this comment is superfluous, but check out sheet hydroforming. You only need one side of the blanks, cover it with a (tightly clamped) sheet of metal, which is forced onto the blanks by some construction involving generally a rubber diaphragm or bellows. It's pretty cool! 😊

"Can wood form steel?" Blacksmiths making armor a few centuries ago: 🤨

@omegachadrequiem3831

3 жыл бұрын

Few more like a couple dozen

@omegachadrequiem3831

3 жыл бұрын

Ik its a joke

@proudtitanicdenier4300

3 жыл бұрын

@@omegachadrequiem3831 shut

@bulwynkl

3 жыл бұрын

IIRC, sheets of different hardness rubber is used over steel forms to achieve many pressed forms.

@omegachadrequiem3831

3 жыл бұрын

@@proudtitanicdenier4300 no karen

Outta take a gander at ‘I Did A Thing’ and his steel toed crocs

@Ididathing

4 жыл бұрын

Dont mine are embarrassing compared to this.

@Saptarshi.Sarkar

4 жыл бұрын

@@Ididathing Lol you replied

@ergohack

4 жыл бұрын

Is it only a coincidence that this channel looks like it's going to be the second sub 1 year old channel I've found in the early stages of massive channel growth, and they've both made videos about steel toed Crocs? I don't think so.

@quill404

4 жыл бұрын

I did a thing LMAOOOOO hey 👋

@weegle.

4 жыл бұрын

@@Ididathing hows the lizards

I love how this channel is the epitome of overengineering. Mid-video I realised this would probably take a few hours for a blacksmith to make.

@macmurfy2jka

2 жыл бұрын

Or composite a fiberglass toe right onto shoe.

@NippyNep

2 жыл бұрын

nah he copied i did a thing

@mcbawangyakuznouxman9439

2 жыл бұрын

And was the stuff that were made.. free to begin with? Every weight of the craftsmanship .. cost more than a penny!

@nikkiofthevalley

2 жыл бұрын

@@mcbawangyakuznouxman9439 Ironically most of the expensive tools in Shane's shop were gifted to him

Engineering decision making 101: Why is the plate 16 gauge? Well, my wife was asleep

@hansdampf2284

2 жыл бұрын

That basically men’s decision making 101. :D Why are we having McDobalds for dinner? Well my wife was asleep. Why is you daughter eating so much candy? Well my wife was asleep

Faceless is fine to me 🤷🏾‍♂️ Your projects are stars on their own. I call you The Young This Old Tony. Keep going.

@rauldragu9447

4 жыл бұрын

Just now i realize that i don't actually know what TOT looks like. I guess he does such a good job at being an enjoyable guy that he makes you feel like you've known him for a lifetime so you just stop questioning stuff like that and you just enjoy hanging out with your faceless, nameless buddy for around 30 mins or so.

@Exgrmbl

4 жыл бұрын

@@rauldragu9447 It's just not important with these types of creators, generally you identify them more by their hands...that being said, you can see Tony in the "Stress, Strain & DIY Tool Holder" video.

@rsquared4118

4 жыл бұрын

@@rauldragu9447 TOT show his face on the 100k sub videos thats the first and last

@juliankandlhofer7553

4 жыл бұрын

This Young Tony

@kobevink

4 жыл бұрын

Julian Kandlhofer dammit too late

Why did I watch this? KZread: Did you enjoy it? Well, yes... but... KZread: You're Welcome.

@Evanheinkel

3 жыл бұрын

So true

@SmoothBaracuda

3 жыл бұрын

If you don't know what's in infinity how can you effectively search through it y'know

@thatonecouchpotatoe7153

3 жыл бұрын

Me

@deviousdefiler2312

3 жыл бұрын

I used to think like this. Then I realized, if you don't know history and you come up with an idea like this, then you are basically inventing that idea just as the original inventor did.

This was very interesting to watch, especially as a tool and die maker! Loved watching the trial and error! It's honestly the best way to learn. Draw dies are definitely the most complicated dies to design! Impressive even more still as you were able to accomplish this using wood! Love this channel! I think I've watched all your videos now! Looking forward to seeing what's next!

@thespamhunter7386

Жыл бұрын

a tool and what maker

7:22 “I’ll leave it as an exercise to the viewer” sudden ptsd from college textbooks

"i want to wear my crocs in the shop and not smash my feet" me: "OMG Finally, I'm not alone!"

@howardosborne8647

4 жыл бұрын

Michael Brown, you'll notice there's over 90 thumbs up to your post. Seems like a lot of us favour Crocs as preffered footwear in the shop. I certainly won't be out there wearing these👠👠

@snack4458

4 жыл бұрын

There is definitely steel toe cap crocs. Google it

@uglypinkeraser

4 жыл бұрын

@@snack4458 I've been looking out for steel toe crocs for years, googling it only produces a few DIY results, nothing mass produced.

@antonburdin9756

4 жыл бұрын

What about Birkenstock A 640?

@SnailMan63

4 жыл бұрын

Howard Osborne I don’t actually work in a shop at all but I believe I would prefer crocs if I did.

This guy is literally the personification of: "How old are you? Between 7 and 37"

@jawnlemon885

3 жыл бұрын

He is mark zuckerberge

@jonfischer111

3 жыл бұрын

he looks very familiar, i cant say how but he does, also looks late twenties maybe early thirtys

@seanstreck2669

3 жыл бұрын

He reminds me of at least 5 different people from college, which I graduated from in 2013. I would say 27-32 is the range.

@movezig5

3 жыл бұрын

This is why the subreddit r/13or30 exists.

@timtim6373

3 жыл бұрын

Looks like tony hawk’s son

I love seeing your iterative process, and I totally relate with this sort of side project that is maybe a little bit useless, but still teaches you a lot about a process that you can carry forward.

The first form dies were made out of wood, and they were used in smith shops. It could be argued that the first mass production elements (scaled for the day) were made in there.

@karenaubrey5737

Жыл бұрын

History ... Not studied any more!

Next video: "Crocs™ sued me for 7million dollars"

@Aedi

3 жыл бұрын

"Crocs sued me for designing a new product for them."

@unicornqueen268

3 жыл бұрын

Crocs would like to know your location.

@Lillylafrog

3 жыл бұрын

Then stole my product idea

Your problem-solving skills are really impressive, it would be cool if you could share more of your background (how you learned all of this, if you studied at university, etc.)!

@bruce-le-smith

3 жыл бұрын

Oliver swack he's definitely using engineering terminology throughout this video

@MrDragonorp

3 жыл бұрын

@@bruce-le-smith I heard in one of the videos that he was the engineering leader of a couple of projects, like 3D printers, in a company. so he definitely has a solid engineering background

@nthomas87

2 жыл бұрын

Wighton attended the University of North Carolina at Charlotte, where he received a Bachelor’s degree in Mechanical Engineering and a Master’s degree in Computer Science. Wighton formerly led an engineering team at Formlabs that makes 3D printers that utilize stereolithography (SLA) and Selective Laser Sintering (SLS) technology. He is an inventor on five patents and 13 pending applications. -Wikipedia

3 things you might want to look into the next time: blank shape has a big impact (doesn't need to be square - might be squiggly shaped). To get rid of wrinkles, you want to stretch the material OUTSIDE of the final part you want to make. Blank holding is actually quite important (draw beads, clamp force, bla bla bla). I love how you got actually nice quality parts from such a simple tool . I really really like how you get to your result and that you show the iterations.

I did pneumatic forming with wooden forms in my college metalworking class. Annealing the metal, bolting it to the form, and then hardening it afterwards makes the process SO much easier. That lets the metal actually stretch and form, and then you can harden and temper it however you want at the end.

@HuyV

2 жыл бұрын

I was thinking this throughout most of the video! 😂

@dougvankampen2164

2 жыл бұрын

I had this same thought! Big fat sooty flame, spreads out the molecules, forms like butter. At least aluminum does. 😂

The sad part is that each tool is only for a right croc

@jimberkt

3 жыл бұрын

Yeah, i was thinking he would have had a lot more success if he tried to do both in one press, like a kidney bowl. I think you would get a better form because the pressure would be spread over a larger surface area.

@GT40Nut

3 жыл бұрын

OMG you're right or is that correct.

@notreal5826

3 жыл бұрын

The left foot is never in danger, so I don't see a problem

@Ernzt8

3 жыл бұрын

Part two is probably a mirrored version of this video

@bcapa217

3 жыл бұрын

Not to mention one particular size shoe

Nice work. Lesson to be learned from WWI. German helmets stopped bullets. Ours did not. Multiple pressings. Each going a little deeper, each time. Plus soapy water. This led to a more even wall thickness. So bullets to the forehead, temples, etc .... were stopped. Maybe that would fix your issue w/ folding/bunching up. I look forward to seeing more of your work!

@janeblogs324

4 жыл бұрын

Rare to find a golden comment like this, most are just fake backpats

@darkfyy

4 жыл бұрын

Weren’t helmets for shrapnel, not bullets

@jonasfrito2

4 жыл бұрын

@@darkfyy independent of the cause, if your helmet gets a hole... You're having a bad day...

@hjartland

4 жыл бұрын

@@darkfyy depending on caliber, distance, etc. The idea is wall thickness. Being more even through the item. And how they managed to make that happen.

@brenislanders

4 жыл бұрын

it's always german engineering 😆

You are so right about this part 15:32. In designing stuff you have to ambrace failure. I know it can be hard for some but I would say to become a good designer in general one must to learn to fail fast to get to the end goal. We shouldn’t spend too much time trying to think if the prototypes along the way are finished or not becouse we just want the end product to work. Embracing failure is one of the ten design heuristics I live by and apply it to my own business

YOU are the star of the show! You literally make everything happen and escalate it to a higher level its just amazing 👏 love your videos never stop 😇

“ I don’t know what I’m doing, I just know what I’m trying to do.” Needs to be on a shirt yesterday 😂😂

@fredrikstal1968

3 жыл бұрын

where is this quote? It's fantastic

@carpetclimber4027

3 жыл бұрын

@@fredrikstal1968 16:40

@WhoWantsToKnow81

2 жыл бұрын

For real

@djbiscuit1818

2 жыл бұрын

I'd buy that, and I don't really buy merch much.

@Khalid.Ibrahim0897

2 жыл бұрын

unfortunately im broke so i cant sell this lol

You are what I want to be when I grow up. I'm 24

@petergriffin8752

3 жыл бұрын

@@ccriztoff and you sir, are a hater

@lakesjustlakes7395

3 жыл бұрын

@@ccriztoff damn u didn’t have to violate him

@frawding9438

3 жыл бұрын

@@ccriztoff damn what a rude thing to say

@SnugglyBaby

3 жыл бұрын

Man child

@yassinelfakharany8300

3 жыл бұрын

@@ccriztoff if you think your funny Ummm... YOUR NOT

Great job Shane! This was super interesting being able to watch the entire process.

the projects dont exist without you soyou are actually the star.

I'm surprised no one in the comments has mentioned "draw beads". Draw beads are bumps overwhich the metal is pulled on the edge of the form to put resistance to pulling it in. Not stop it from pulling it in, just resistance, so that the metal is under a lot of tension, which helps it stretch better without wrinkling. Go look it up. As a student, I once worked in a research lab that investigated the effect of different lubricants on draw bead friction. The auto industry spends a lot of money on this.

@cothfi

3 жыл бұрын

You should get verified too Matt.

@bubba7849

3 жыл бұрын

Wouldn’t heating up the sheet metal work aswell?

@jakehollyman5686

3 жыл бұрын

@@bubba7849 Yeah, it would reduce the elasticity of the metal, therefore a larger strain with a smaller stress, aka it will just deform more with less force, as heating the metal would increase atomic kinetic energy, increasing the interatomic distance and thus the interatomic forces decrease - allowing for the metal to be more ductile and this characteristic determines how well the metal deform s under stress. Quite fascinating how heat can be used to harden metals as well as soften, and both have so many uses.

@loul7239

3 жыл бұрын

@@bubba7849 Ask a blacksmith or an armorer. We deal with this sort of stuff all the time. Even hot metal thickens on the inside edge and thins on the outside edge when bent. Look up some videos on chasing and repousse...you will see how it is done old school.

@mitchstavenau

3 жыл бұрын

So it looks like that would be similar to what he did at 11:48, minus the actualbead part. As a current engineering student who enjoys your videos, I'm curious what did you go to school for?

"I'm not made of money" **has his own CNC mill**

@banana13775

3 жыл бұрын

@Gavin Cooke so you could get Shane's joke but not OP's. Impressive.

@banana13775

3 жыл бұрын

@Gavin Cooke yes it was. pretty overused joke format too.

@banana13775

3 жыл бұрын

@Gavin Cooke well then it looks like the joke went over your head. Congrats, you played yourself.

@banana13775

3 жыл бұрын

@Gavin Cooke nah im good. get a better sense of humour ig.

@getmeoutofsanfrancisco9917

3 жыл бұрын

​@@banana13775 Jesus Christ, you are acting like a pretentious clown.

I think it's hilarious that your wife makes all these things and you take the credit for it.

@A1937CX

Жыл бұрын

What, where is your evidence?

Hes changed so much in the last year

Remember this guy when he spent his days mass producing steel toed crocs, and I was here to watch along. See you when you hit a mil subs.

@Jim-dg5yr

4 жыл бұрын

J

@Eetu_Veikkola

4 жыл бұрын

J

@no_u

4 жыл бұрын

Same bro

Literally every comment from the hoop video: “you should mass produce this” This guy: “I’m going to mass produce steel toed crocs”

@laharl2k

3 жыл бұрын

"You should mass produce it" said everyone that would never buy it.....

i cant believe no one ever told you to take a torch and HEAT UP THE METAL. makes it waaaaaay more malleable.

I’m just a lowly woodworker, but my engineering degree helps me see the genius in this man. You sir, are inspirational. Also, the way you include your wife gets the approval of my wife, and now she watches with me. Thanks for sharing. My kids will be shown you as an example of how cool it can be to be smart and capable with your hands.

I have a even worse idea: Full metal crocs.

@baconpantsable

3 жыл бұрын

Weaponized lack of dignity

@groot5068

3 жыл бұрын

Yes

@wtracyfs

3 жыл бұрын

👁👄👁

@SneakyTogedemaru

3 жыл бұрын

@Levente Horváth just what I think when I saw it.

@TheseDays93

3 жыл бұрын

Born to croc

8:42 my parents after having me as their second child

@austinmaynard269

3 жыл бұрын

Lmfao got me dead 💀

@DumbazzProduction13

3 жыл бұрын

Hahah thank you for this. Made my day

@idahoplantguy9027

3 жыл бұрын

I belly laughed for a minute straight with this comment. 😂🤣😅☠️

@tomd8019

3 жыл бұрын

Best laugh I've had in a while. 🤣

@turtl_to_a_T

3 жыл бұрын

Lmfao irl

19:48 I'm too weak, and my wife's asleep, so... 😂

"So I'm going to use my Tormach as a poor man cmm"

Die design is a fickle beast. Easily as much art and intuition as science. I must commend you. You have wrapped your head around draw die concepts that take years for some die design engineers to grasp. And you’ve done it with a Chinese press and some scraps of wood!! As far as showing your face on camera...I’d say whatever makes you more comfortable and doesn’t interrupt you workflow too bad.

I dreamed about steel toe Crocs since I first started wearing them in the shop. I can't believe I'm not alone. Will definitely buy ones..

@UhOhUmm

4 жыл бұрын

They do make croc type shoes with protection. Toffeln EziProtekta comes to mind. Look around in your work shoe stores, you will find them.

@antonburdin9756

4 жыл бұрын

What about Birkenstock A 640?

Moving the probe in local space, is key. “Are You Local People”😂😂

As someone who left an engineering path to pursue custom fabrication, I really enjoy watching your approach and perspective. Couple of insights from my experience, in case they might be helpful - MDF to make your bucks. It's much more predictable, leaves a better surface on thin/soft, and just the right amount of conformity on the edge for

"Metal really likes the shape that it is" Very inspiring, good for metal

@jamespeck10

3 жыл бұрын

lmao

@lindawest5403

3 жыл бұрын

As a professional KZread viewer, I really like how you do the mini-videos at the bottom to show us the minor tasks (like 14:45). You have a very good intuition about video pacing to keep our attention.

I come from aircraft engineering so I’m more of an aluminum guy, but we would typically use annealed stock for a formed part with radii that tight, and then use the work hardening itself or tempering to hit specs. I’d reason that you would still run into some issues if you fully annealed the stock at the start just based off the gauge you’re going with, but if you started with an initial rig that is similar to what you have going, I’d say you could take it three quarters the way to your ideal shape and avoid buckling. From there you could trim to your final dimensions, hit it with a quick torch anneal (benefits of it seeing a croc and not an aircraft haha), and then pop it into a final forming block (a registration pattern of some sort would be helpful) that would set your final dimensions and work harden it back to steel toe territory. Would hopefully avoid a lot of springback related calculations, and would mostly just give you an excuse to put a mirror polish on those bad boys! Anyways, just figured I’d throw my hat into the ring! Who doesn’t love a little armchair manufacturing engineering? 😂 Love the videos!

@One_Shot21

3 жыл бұрын

But for this he would need different equipment right? In order to anneal wouldnt he need some kind of metal oven?

@williamskrainski8407

3 жыл бұрын

@@One_Shot21 Torch

@xavier4563

3 жыл бұрын

@@stockphotosguy6037 I feel ya

@elizabetholiviaclark

3 жыл бұрын

That was a nice bit of education. Thanks for taking the time to comment.

@HimanXK

3 жыл бұрын

@@stockphotosguy6037 when you bend or harden metal, you leave a lot of stored stress in the metal. Stored stress makes metal hard, which also makes it difficult to bend. Making the metal really hot, keeping it hot for a while, and then letting it cool really slowly gets rid of the stored stress. With less stress, the metal is easier to bend. The process of heating, holding, and slow cooling metal to remove the stored stresses is called annealing. There's actually more to it involving the crystal structure of the metal, but that's the easiest explanation for layman's terms.

You might try annealing the metal before pressing it into the form. The metal will stiffen up as soon it is pressed into the form.

Cool! Been wearing Bistro line Crocks for over 13 years!!! great stuff!!!! I would definitely want those for work!

Didn’t “I did a thing” also make steel toed crocs?

@medicmike2836

4 жыл бұрын

Yes. Very, very, VERY badly compared to this.

@prestonshaw5391

4 жыл бұрын

@@medicmike2836 the whole point of I did of thing is to do weird things very badly to disappoint viewers

@Ididathing

4 жыл бұрын

@@medicmike2836 i agree. very badly

@H.P778

4 жыл бұрын

@@Ididathing hey I recognize you but I do not know fom where

@medicmike2836

4 жыл бұрын

@@prestonshaw5391 Not really disappoint. Though I did a thing usually doesn't care about the end product, his videos are for the purpose of entertainment(so the end product tends to be bad because that looks funny). Which is totally fine. His focus is just shifted towards entertainment and I have to say that I did find his videos very entertaining.

So what you are doing is soft forming.... in a way, just a tip, your "tool" is pt so its harder than your punch, the crop form in other words. Add a 90° bend to the outside of the stock use that bend as a clamping area that will force the material to stretch rather than pull. If the material pulls you'll have some good and some bad parts. Try AMS 5510 around 30 thousands. With my suggested method in combo with your methods you should have a 25-27. Thousands thick steel toe. I did a lot of forming,machining, and sheet metal work but thus I enjoyed the video! One more recommendation is pick 2 different materials. One vastly stronger than the other. I recommend using pressure treated for the punch, and steel for the tool. Ideally heat treat your tool steel to prevent wear and tear

@alexanderwalker5473

3 жыл бұрын

Big science words make me head hurt

@nuggie3905

3 жыл бұрын

Big brain words no fit in penut brain

@thetedmang

3 жыл бұрын

Who are you friend?

@elloo98

3 жыл бұрын

Is my understanding correct in that you want to make the material thinner rather than drawing it in from the sides? I can see that drawing the sheet to be smaller in length would easily make creases.

@TheHungarianHitman

3 жыл бұрын

@@thetedmang Thats @ZiggsEdits !

I really do adore this man's tenacity. However I can't believe there's a human being on this planet so committed to crocs.

Genuinely one of the most endearing creators on engineering yt

I like the no face “ala young tony” style. And also like this old tony videos I watched the whole 24 minute with a smile. Even tho I don’t know why, it’s a asset for a croc for f*ck sake. Great work

@prasadvn524

4 жыл бұрын

Great attempt.By the way what gauge us the croc sheet ?

@couragewoodworks2843

4 жыл бұрын

Also you can watch the whole thing without it feeling like an hour which means it’s good content.

@Nevir202

4 жыл бұрын

Have you seen the ToT video where he does show his face? It feels weird after so long not seeing it.

@tya7664

4 жыл бұрын

young stalin i see you

i know this video is months old and you may not read these, but i appreciate when you look into the camera while explaining something because it seems easier to focus on what you're explaining

@justinvang7239

3 жыл бұрын

I know someone who made steel toed crocs, his name is ‘I did a thing’.

Thinking that each attempt that isn't perfect is a failure is counterproductive. Success is getting better with each attempt, failure is giving up before it's done.

Your videos are fantastic, I really appreciate them. Thank you!

I legitimately moved my right leg out of the way when he dropped the weight on his

@turbanator9840

3 жыл бұрын

lmao same

@minjaarsic3327

3 жыл бұрын

same, it happened to me too many times

@charles67198

2 жыл бұрын

I did too! And I'm laying in bed!

@eriksmalling2494

2 жыл бұрын

@@charles67198 lmaoooo I was gonna say this till I read it lmaoooooo

@zKnizee

2 жыл бұрын

Same🤣🤣

I absolutely loved that you interrupted "made of money" with an ad. That's amazing XD

@PsychicEdits

3 жыл бұрын

It didn't do it for me, so it must've just been a coincidence lol😂🤣

@PsychicEdits

3 жыл бұрын

but I love how he's suddenly wearing expensive gold and diamond jewelry when he says that🤣

@kaelart5876

3 жыл бұрын

Exactly

@mightymaxglitches1548

3 жыл бұрын

Lol i checked the comments while the ad played and it's exactly how it happened

@aggonzalezdc

3 жыл бұрын

They dont decide where the ads go, KZread just places them where it wants based on one of their algorithm.

I've made (heavy) fiberglass dies to do steel and aluminum pressings. I've pressed pieces up to two square feet. I have a large-platen 100 ton press. It's mostly a matter of location and keeping the material in place with pins. One thing that makes the pressing easier is to use low strength "tryout" steel. Only about 30kpsi yield, so it forms easily.

Yeeeeeeeees! I finally found the video where you say what app you use to draw stuff. Man I looked for this a long time.

As a professional KZread viewer, I really like how you do the mini-videos at the bottom to show us the minor tasks (like 14:45). You have a very good intuition about video pacing to keep our attention.

@serairesana6600

3 жыл бұрын

Mate, we should have a dance off!

@AlpernDrms

3 жыл бұрын

How can i be a Proffesional KZread viewer?

@dewifrancis1299

3 жыл бұрын

Professional KZread viewer lmao

@AlpernDrms

3 жыл бұрын

@@brodyyoung8296 Ahem... Professional KZread *Viewer,*

“What are the holes in crocs for?” “That’s where your dignity leaks out.” Stuff made here guy: “Oh ya. Watch this”

@jacintorodriguez8172

3 жыл бұрын

My mom wants a croc made metal not just the toe

@doctorkocktor1347

3 жыл бұрын

Jacinto Rodriguez i am your mom

@johnryan1292

3 жыл бұрын

@@doctorkocktor1347 i read this in a darth vader voice

19:10 the pop tarts are the lifeblood of creative thought

So I make my own custom bending and forming jigs out of steel for mass production.. this is really exciting seeing how someone else makes their forms.. the more you make these forms it will become second nature where it usually works after the initial idea..

Plot twist: He's actually using an aging filter the whole time. 1:00 is his real face and age.

@JonatasAdoM

2 жыл бұрын

It was uncanny how much that looked like him.

@3:33 most subtle flex ever with the machine shop in the shadows 😂😂

Shoes were made out of wood before you were born .When in Europe my family went to Holland and got wooden shoes more of a novelty in 1965.

Is no one going to talk about the poptarts just sitting on the table. That's the most genuine part of this whole project.

Hello, i may be a little late on this comment, but on your wooden press, wood is realy good at handelling compression, as long as the compression happends in the dirrection of the grains, think of them like a bundle of matches, if you press down on the tip of a match, it wont brake that easy, but if you press down at the side of a match it snaps. its the same thing with the wood itself. So if you try to mass produce steel toad crocks in a wooden press, keep that in mind.

@JohnKrakatoa

3 жыл бұрын

this is important

@averytomeo1722

3 жыл бұрын

🧠

@joostin123

3 жыл бұрын

Being an engineer, I think he knows

@calebrobinson6406

3 жыл бұрын

Steel toad

@mubasshirhossain5436

3 жыл бұрын

Do you think it's possible light travels at different speeds in opposite directions? kzread.info/dash/bejne/ooiimKewmMWYZ84.html

We had a whole storage room filled with hand made wooden forms for sheetmetal. Made forming complicated parts a whole lot easier and simple, hammer it to form and you're done.

the indent for the steel wa genious and the massive wood design, it was amasing fit

"I did a thing" youtube channel did this too

@hunterm.moreno4201

3 жыл бұрын

His video was mostly a joke though. Stuff Made Here seems like he'll seriously use his custom Crocks. Considering in other videos you see them on.

@samuelschlossberg5768

3 жыл бұрын

@@hunterm.moreno4201 to be fair, im pretty sure IDidAThing uses his steel toe crocks, but these are way higher quality.

@sishol

3 жыл бұрын

But this guy even said he is the first but i did a thing had still done it before weather on not it looks different he still did it

@prestonmelton6571

3 жыл бұрын

Look at pinned comment

@timenoen

3 жыл бұрын

He did it first

"Does it look like I'm made of money..." cuts to ad lmaoooo I love that😂

@KrisStruble

4 жыл бұрын

That Tormach answers that question with a resounding yes.

@PAP1GLOCK

3 жыл бұрын

It cut to a ad for a bank for me

@thebigtimechannel9927

3 жыл бұрын

My ad blocker ruined the joke!

@bryanrandom6382

3 жыл бұрын

@@thebigtimechannel9927 lol

@peytonjohnson9785

3 жыл бұрын

I dont even have an ad blocker and still didnt get it

he said “among us” at 6:24 like the funny game with the imposters

Just discovered this channel. Love the content and energy.

“What, does it look like I’m made of money” as ad plays

@codeerror6915

3 жыл бұрын

Still kinda ironic

@sleepdeep305

3 жыл бұрын

As he sits in front of very, very expensive machines not many have access to

@mostcoolkid78

3 жыл бұрын

Clayton Eifert my step dad owns tons of farming equipment and still aint rich

@sleepdeep305

3 жыл бұрын

100k Subs with no videos challenge Fair point, and your father most likely won’t be “rich” until the end of his lifetime, or at least until he can’t do the work. At least that was the case for my grandfather.

@sleepdeep305

3 жыл бұрын

Skyler Reynolds Most likely, but I thought the shot was just set up in such a way that it would make for a funny gag. It looked intentional, and I thought it was pretty harmless

"the novelty factor might be worth it - is a smart mans way of saying, lets do it for the memes"

Yes my wife and I think you are doing great and enjoy when you show your face to the camera. Thank you for what you are doing

Usually it's advised to lubricate the seel sheet + the steel top and bottom plates, and the mold, to reduce creasing. And probably springback too.

One suggestion: You could design it so that you purposefully allow crumpling to happen at the back end (the part that you are going to cut off anyway) so that all the pressure will be dissipated to that spot making the parts that matter crumple less.

When he did the "Continue in part 2" I quickly went to check if he posted it already.. yeah I got pranked..

@murph3292

3 жыл бұрын

same

@WillyBoss567

3 жыл бұрын

We all got played

@wrex509

3 жыл бұрын

And his wife didnt get pranked this time. Unusual twist.

@theadag

3 жыл бұрын

I cussed him out then apologize

@kentholmberg3948

3 жыл бұрын

I just checked how much was left of the video, noticed it was a lot and understood it was a joke. Also I'm a self-titled professional KZread watcher.

19:00 I don’t think I’ve ever wanted a s’mores poptart more than I do right now in my life

"Do you know what the absolute worst thing ever is?" Doing things the right way. lmao I can relate