(2019 Fall update - Realtime setup - A little more detailed construction) kzread.info/dash/bejne/iYKWlbukk7C8gZM.html

@84v7climbers7

3 жыл бұрын

-August 2020 Update : Origional School Holds as well as Hold Set A, B, & C have been set. -I built this wall a year before CoronaVirus, since Corona Virus I have been working on a way to set this wall up solo.

Very cool design, especially the vertical extension!

Just awesome what you've done ! Chapeau bas !

Absolutely amazing, especially the extensions. Very clever :)

@84v7climbers7

4 жыл бұрын

If you want something bad enough, you'll find a way to make it happen.

That is cool indeed! Thanks for telling me about this in Chris’s video :) I have some planning to do ;)

Smart design!

@84v7climbers7

4 жыл бұрын

Thanks! If you really want something you'll make it happen.

Woah, this looks awesome, would be so useful right now.

@84v7climbers7

4 жыл бұрын

I can put the first extension on by myself. The 2nd piece I need some help to tip the wall up and down. Since were all on lock down I'll try to figure out a counter weight system to do it solo.

unbelievably sick

impressive

Cool!!

I love that shade of purple...

All the gyms are closed atm so I'm looking into building something like this. I have no idea how though so these videos help me get some sort of an idea what it requires. Thanks!

@84v7climbers7

4 жыл бұрын

Take your time, do your research and it will turn out great.

@ScarredBert

4 жыл бұрын

Honestly this wall is super fucking advanced. Unless you know woodworking inside and out I’d probably stick with the basic types

@porrasm

4 жыл бұрын

@@ScarredBert Well I'm also looking into just designing the wall and hiring someone to build it. It would be more expensive but I'd get a more complex wall.

@ScarredBert

4 жыл бұрын

porras I will be very surprised if you can find someone that actually knows how to do these better than the online metolous guide

@84v7climbers7

4 жыл бұрын

@@ScarredBert Yes and no. I drew the plans on a piece of paper and used a skill saw and drill. The sizing and weight distribution was thought out, but also guessing at the same time.

Good

Love the design. Do you have file with all the material used and plans for the build?

@84v7climbers7

4 жыл бұрын

Most of the design is copied over from a moonboard climbing wall. A moonboard is a standardized climbing wall so climbers can climb the same routes across globe as long as they have the same setup. The plans are @0:11 they were written on a scratch piece of paper. No fancy files. The materials list is @4:34

I'd like to point out something I did not mention. @2:58 I attached a 2x10 or 2x12 across the bottom. This prevents any sway.

Awesome. Didn't get through much popcorn though!

@84v7climbers7

5 жыл бұрын

Thanks, I'm not a fan of 10 minute youtube videos.

What a great project! could a dyno gives bad impact on top? Like the wall will fall off?

@84v7climbers7

3 жыл бұрын

No not at all. Three average adults can hang from the top row and it wont tip. I should make an update video.

Hey! awesome design, planning on doing a mimic of this... can you list the amounts of materials you needed to build this?

@84v7climbers7

4 жыл бұрын

3 1/2 - sheets of plywood 6 - 2x6s 2 - 4x4s 6 - 1x1s 5 - 2x4s Not an exact list but that's pretty close. I recommend doing 5 vertical supports (I did four) The wheels are the most expensive part. Luckily my buddy threw down on those. Goodluck!

@tsevioberlander6208

4 жыл бұрын

@@84v7climbers7 muchly appreciated!

Hey, cool idea. I'm wondering what you did for the lighting and the holds? Did you end up switching them up for official Moon board holds and put the lights in then as well? Cheers.

@84v7climbers7

4 жыл бұрын

Thanks for watching! We are currently using the Original School Holds with Hold Set B & Hold Set C. The rest of the spaces we still have sprayed with various holds. We still are using various colors of duct tape to mark out the routes. We've fiddled around with a projector highlighting the holds but that didn't pan out. I was thinking of a quick disconnect for the actual moonlights but they are wired vertically and not horizontally. So I would need 12 quick disconnects which ends up being not so quick. Believe me it's something we're still thinking about and are open to suggestions.

@leoingson

4 жыл бұрын

@@84v7climbers7 I don't know, how the original works, but a "serial port" with "half intelligent rows" of LEDs comes to mind.

I Love your build bro. I’m trying to build one just like that but I’m having trouble with the bird mouth. How do you calculate the bird mouth angle? Also, the 40 degree angle? Thanks in advance!

@84v7climbers7

4 жыл бұрын

Someone just asked me this on Instagram. I had no Idea it was called a "Birds mouth" cut. I used a protractor to get my 40* angle. After that I just traced a 2x4 onto the angled cut. Before I attached the wall frame to the kickboard, I used an app on my phone to double check that the wall was the correct angle.

@KeepItReel

4 жыл бұрын

84v7 Climbers hey thanks again for the help. I finally finished wall. Now, I'm working on making my own holds till my moon board holds comes.

@84v7climbers7

4 жыл бұрын

@@KeepItReel No problem. I'm currently trying to figure out an easier way to set this up solo.

@KeepItReel

4 жыл бұрын

84v7 Climbers like wise. This is what I have in mind. I was thinking about having them on door hinges and maybe some way use ropes or chain in the back to pull them together. I don't know but please let me know when you figure something out. I'm currently busy making holds right now so I can climb. I'm so weak right now 🤪🤪🤪

@84v7climbers7

4 жыл бұрын

@@KeepItReel We had a plan to make the extension one piece and have it on an industrial size hinge connected to the main wall. Once the extension was in place I would slide some gas pipe from the bottom of the wall upward into the extension to give it it's full strength back. Sadly we could not try this because of the dimension of my garge. Folding the extension backwards makes the wall to high, and folding it forward makes the wall unusable when its inside. Tipping it up isn't bad (I'm 6'5), bringing it down is a little tricky. So far I just threw some free weights on the top backside of the wall, and it makes the tip back down manageable solo. If you made your extension two pieces, you can always practice with just the first extension. It's not perfect but it's better then no extensions. It's pretty manageable with just the first piece. Once you set the pipes in, lift up one side of the extension and place it on the first pipe. (not all the way down) Then lift up the other side of the extension and place it on the other pipe, then push it all the way down. It's easier then trying to balance the extension yourself and slide it on both pipes at once. To others reading this. No it's not a P.I.T.A. It takes 5 minutes. That's quicker then some of the approach trails.

Great idea, looks awesome, any issues with it potentially tipping when you get nearer the top of the extensions?

@84v7climbers7

5 жыл бұрын

Not at all. It's pretty stable. We did put two 25lbs plates on the back though just in case. It also helps counter balance the wall when we tip it back down.

What size screws did use to put the 6 by 2 onto the kickboard ?

@84v7climbers7

4 жыл бұрын

3"

hooo! la wea buena, hermano mío 💝

How tall are your ceilings? And what is the height difference between indoors and outdoors

@84v7climbers7

4 жыл бұрын

My garage cieling is 7'5" and the base of the wall is 7.25'. This gives enough clearance for the tip. With the wall tipped over and on its side, it brings the wall down to 5.5' Just low enough to squeeze out of the garage door. The height of the fully extended wall is 10.33 feet. So the extension adds about 3ft in height. @:12 I wrote out the dimensions of the Moonboard from there website and converted everything over to feet. (Sorry if it's not legible, I drew the plan on a napkin)

How many screws do you use per 2x6 stud to attach it to the bottom frame? And then you have 2 2x6s on top of the kickboard?

@84v7climbers7

4 жыл бұрын

2 or 3. I will check when I get home.

@84v7climbers7

4 жыл бұрын

It's called a "Bird Mouth Joint" I used 3 screws. There's a 2x4 on top of the 2x6 kickboard.

Where did you get the holds from?

@84v7climbers7

4 жыл бұрын

Various Companies. They are slowly all being switched to MoonBoard Holds so I can use the app. kzread.info/dron/BGRwkIK0PPqm_4WNdbgcFg.htmlvideos Metolius Climbing. Atomik Climbing Holds. Ebay Rock Holds. MoonBoard Holds

mainstage EDC 2012

Cool design. Didn’t factor in cost of holds into build

@84v7climbers7

3 жыл бұрын

Hold's have a wide range of prices based upon size, solidity, material, and bolt on or set screw. Although I built this to put all the moonboard holds on it, this video displays MoonBoard holds with several other hold company products. It's a tricky question to answer for this video. I could get some ebay holds and fill the board up for a $100 or get some quality holds and fill the board up for $1000+

haha total $500. that doesn't include a single hold

@84v7climbers7

4 жыл бұрын

That's right. You could fill the board up with cheap holds for $100 or you can buy all the moonboard holds for $2500. Hold prices can vary widely so I only listed the wood supplies.

@williambrown1163

3 жыл бұрын

@@84v7climbers7 where are the cheap holds to fill up the board for $100?? I've scoured the internet & found nothing close to that

@84v7climbers7

3 жыл бұрын

@@williambrown1163 www.amazon.com/Rocky-Mountain-Climbing-Gear-TC-JRNL-SNZX/dp/B00CM91N0S/ref=sr_1_31?dchild=1&keywords=rock+climbing+holds&qid=1602020715&sr=8-31 These work great on an overhang. On a vertical wall not so much.

@84v7climbers7

3 жыл бұрын

@@williambrown1163 www.amazon.com/Rocky-Mountain-Climbing-Gear-TC-JRNL-SNZX/dp/B00CM91N0S/ref=sr_1_31?dchild=1&keywords=rock+climbing+holds&qid=1602020715&sr=8-31 These are great for an overhang. You'll get some jugs, pinches and crimps. These holds on a vertical wall are to easy however. Hope this helps.