WOW Dude that is cool, I'm an 80's kid and knight rider had a very big impact on my life back then. I cant believe there is a kit to make KITT so easy. Thanks for the video much appreciated. I'm ordering this right now and adding it to my list of cheap but very cheerful mods to my car. I'm gonna have a lot of fun with this light. Even the red and blue lol 👍👍👍

Thank you for the vid... Using an external 12v battery was a great idea.

Thanks for the video buddy 🙌🏾 i installed the rgd light on the center console because of you and they look great

Thanks for this brilliant video you inspired me two do it to mine I have installed a voice unit so it warns pedestrians that I'm there as well

I notice the cable included is 2 male to 1 female. I’m assuming you spliced the switch and the lights both to the one female, the. One male is used to supply the power and the other male isn’t used at all??

Get the KITT app on iPhone.I got it pretty cool on my RAV4

Good video, found you on Twitter!

@CyberOwners

4 жыл бұрын

Thanks!

I know it's "against the law" but any moron civilian or cop that were to see a red "KITT" strobe light on a car, especially a '80's Firedbird or Trans-Am, and thinks it's a police car needs to have their reality checked.

@CyberOwners

4 жыл бұрын

Yeah, the rule seems overarching. Obviously a scanner light in the middle of the nose is not a police car/fire truck light.

@protoborg

4 жыл бұрын

@@CyberOwners Not to mention brake lights are red for crying out loud. As long as the light is oscillating and not flashing, I really don't see the danger, especially that low on the car.

I would just wire it into the acessories power.

Great video! Subbed

Hello, was wondering if the LED light simply plugs into the battery pack out of the box? Also how has it held up since making the video? Thanks in advance!

@CyberOwners

2 жыл бұрын

Held up great. The battery pack has a normal wire that I cut and spliced onto the wires I ran from the lights.

@migadgetgear

2 жыл бұрын

@@CyberOwners Good to go. I ordered the battery pack and it arrived yesterday. The LED comes next week. Thanks again!

Thank you for the video! Question, did you have to buy extra wires to extend the lights' wires to the battery pack? I love that you didn't really touch the car at all.

So I assume he connected the 2 wires coming from the led to inside the car and sliced them and also sliced the cable that connects to the battery pack? connected it to the battery pack cable where the plug is connected to the pack itself! please confirm! thanks

👍

awesome do u have the sound too? i actually think its good for pedestrian awareness of car.

Great video Mike! What month was your P3D made? I noticed that my 12/2018 car has the speaker grille and now I'm wondering if mine has the harness.

@CyberOwners

4 жыл бұрын

Mine is a May 2019 build... now to find someone WITH the speaker and pop their frunk out!

I wonder if it is possible to make the front body part semi opaque and stick the lights behind that.

@CyberOwners

3 жыл бұрын

You could put many tiny holes in a grid and it would look solid but light would shine through.

can this be bent at a 45 degree angle back or v it in the middle (perhaps cut the channeling?. I don't mean sideways bent, i know it cant bend that way.

Where I can buy it????????/

Hi. Quick question: before I purchase both items, how do you connect the wiring of the LED light to the external battery? Is the end of the wiring an actual plug to the battery or did you have to make some modifications?

@CyberOwners

3 жыл бұрын

Missed this comment. The battery had a power cable with it that I cut and spliced to the wires I ran from the light.

@jasonkim9310

3 жыл бұрын

@@CyberOwners Can I get a more detailed explanation on how to split and connect the wires? I’m not very electro savvy. Would I need to use a soldering gun? If you could send me a photo of how you connected them, I’d be eternally grateful.

How did you route the cable from front? I don't see any place where i can pull the wires easily from front with frunk removed

@CyberOwners

3 жыл бұрын

Through the rubber seal where the high voltage goes through

@akoundal

3 жыл бұрын

Do you have a pic by any chance? I don't see any small opening even to push the cable from the front to the inside. Did you had to remove any more things other then frunk? I am asking from other lip to frunk area...not from frunk to inside the car for 12v. TIA

Does this void the warranty?

@CyberOwners

Жыл бұрын

No, I didn't mess with anything that would affect warranty. In fact by using a separate battery pack I made sure it couldn't hurt the car 12v battery at all.

Dude. Show the lights!