Excellent tutorial video. I had no idea Createx could be polished out like that. You taught me something today.

Good video Stumpy! I appreciate you taking the time to demonstrate your technique 😎👍

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks!

Very informative video on clearing and polishing model. Thanks for sharing. Have a great weekend coming up buddy. Terry

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks Terry, have a great weekend as well!

Excellent video, Craig! Thanks!

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks! Glad you liked it!

Excellent video. Thank you for making this video.

@StumpyGrumpsScaleSpeedShop

4 ай бұрын

You're welcome, thanks for watching!

You have that looking pretty good!

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks!

Great viedo thank you worked perfect

@StumpyGrumpsScaleSpeedShop

3 ай бұрын

Awesome, glad to hear it worked well for you!

Looking good. I'm not really keen on using 2K or lacquer based clears. I may give this Createx UVLS 4050 gloss clear a try.

Great tutorial. Shiny paint jobs have always been a struggle for me. Hopefully this helps.

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks for watching, I hope it helps too!

Your treatment of the clear coat is the exact same process I use to renew auto headlights - including the Novus2.

@StumpyGrumpsScaleSpeedShop

7 ай бұрын

👍👍

Shine looks good bud. I use a very similar process with automotive 2K.👍👍

@StumpyGrumpsScaleSpeedShop

9 ай бұрын

Thanks!

Thanks. I'm lookin to switch to acrylics and this was very useful.

I’m also interested in how you correct the burn through after polishing. I use Createx exclusively and have never wet sanded because of being water based. I look forward to a follow up video.

@StumpyGrumpsScaleSpeedShop

Ай бұрын

For smaller areas like edges and such, I just touch-up with a brush. If it's a larger area, I will tape the area off and/or lightly airbrush on a coat or two to cover the spot, then airbrush on more clear.

Just found you stumpy. Great tutorial! Subd.

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

Thanks for watching, and for the sub!

Great video Craig, my issue is not with the product it is my patience, I don't let the layers dry enough before applying the next coat. Time to give a another try. Cheers, Wayne

@StumpyGrumpsScaleSpeedShop

9 ай бұрын

Thanks! Yeah, that patience thing is pretty tough, as I am a very impatient person as well. I usually try to have something else going on the bench on these occasions, it helps occupy my mind in-between coats, lol.

@TrueNorthModels

9 ай бұрын

Having a couple of projects helps for sure, I end up cleaning the airbrush between coats to combat the tip dry and if I put 4 or 5 coats on that means I am cleaning the airbrush 4 or 5 times. Cheers@@StumpyGrumpsScaleSpeedShop

That's the issue with the 4050 clear most people using dremels to polish it. It's recommended polishing at no more than 1000 rpm. It's better to use a Dremel at the lowest speed or use your finger and a microfiber towel. It's not as hard as a 2k clear

Great tips just connected to you

Createx now has their 4053 High Gloss Clear. Haven't seen it at the local Hobby Lobby so ordered it from Spraygunner. Almost rivals 2K clear when you polish it.

@StumpyGrumpsScaleSpeedShop

9 ай бұрын

Yes, I finally ordered some myself and it should be here Friday. I'll probably do a video on that too, as soon as I get familiar with using it.

@REKlaus

9 ай бұрын

I mix and spray just like the 4050. Reduce with 10-20 percent 4011 or 4012 depending on nozzle size. I have sprayed it with a .3mm nozzle but a .5mm, .65mm or .8mm work better. With a fan aircap it is even better.

I've used Createx paints for a long time, but i used automotive 2K or HS clears with great results. The only time i had to do any sanding was if i had dirt. I no longer have access to that so i tried some of the 4050 clear today. I did forget the 15 min sitting/bonding time, so I'll remember that for next time. It laid on like glass, but just like Mission Models clear, lots of texture as it dried. Nothing like what I'm used to. I guess what I'm asking, is sanding and polishing just a standard thing for water based clears?

@StumpyGrumpsScaleSpeedShop

11 ай бұрын

There's no real comparison to 2K clears. I can't use them, but from everything I've seen on them you really don't have to sand or polish them. Most other clears, from Tamiya and Testors lacquers, to the water-based clears, do benefit from the wet-sanding and polishing process. It's just a matter of quality, really with the 2K's really holding the advantage, but also being fairly costly in the process. As far as the texture goes, it may have been from not letting the components combine long enough. I have tested this clear many times, and it does take a bit to really get a good mix ratio for your particular needs, which might also be causing the texture when dry.

@hhaste

7 ай бұрын

@@StumpyGrumpsScaleSpeedShop Have you ever tried Alclad's "Klear Kote"? I tried it for the first time recently and noticed it didn't really have any orange peel to it. Their Aqua Gloss did, that one still required wet sanding and polishing but the Klear Kote seems like it's equal to 2K's in terms of not needing any sanding. I have yet to do a full car but I'm going to within the next week, so I can really see how it turns out on a larger surface. I've only tested it on spoons, so far.

Just started working with 4053, what are you using for needle size? Thanks

@StumpyGrumpsScaleSpeedShop

5 ай бұрын

I use a .3 needle, usually right around 22 psi.

How do you do your touchups where you burned through?

@StumpyGrumpsScaleSpeedShop

6 ай бұрын

For very small areas, I just dab the spot with some of the extra color. If it's a larger spot, I will carefully airbrush over the spot and re-clear that area and polish it out again, but I don't tape it off as it will be noticeable.

Very nice, is the Createx UVLS toxic?

@StumpyGrumpsScaleSpeedShop

3 ай бұрын

I'm not sure of the toxicity, but it is water based and has no odor.

Do you leave the clear coat in your airbrush since you have to wait 10 to 15 minutes between coats?

@StumpyGrumpsScaleSpeedShop

5 ай бұрын

Most of the time I do. Every once in a while I'll empty the cup and run thinner through, but I've never really had a problem leaving the clear in the cup. I use a retarder which helps prevent the tip from drying and slows down drying time.

@michaelmorgan1643

5 ай бұрын

Thanks I guess I will just put the cap on. @@StumpyGrumpsScaleSpeedShop

This is beginner question?? Does the tip dry end between coats?

@StumpyGrumpsScaleSpeedShop

5 ай бұрын

I usually don't have a problem with the tip drying. I do also use glycerin in my thinner mixture to prevent that issue, or a drop or two of Createx Retarder if I don't use my thinner.

@tenndude1

5 ай бұрын

Thanks!! My airbrushing isnt going to good !! @@StumpyGrumpsScaleSpeedShop

nice result. 5 coats seem a bit high though. please use another mask though. the mask your using really give your lungs and health basicly

Looks great but way to much work. PPG Shop Line clear three coats and I am done no polishing high gloss all the way. But nice work. Not a water base fan sorry. But for those who work with it good for you just does not work for. Thanks for the video!!😁

@StumpyGrumpsScaleSpeedShop

9 ай бұрын

Water-based has it's uses and purposes. For me and others like me that can't spray solvent-based in the house and/or don't have a steady place to spray them, the water-based are very convenient and useful. This just shows that a nice finish can be attained using water-based paints and clears.

@PatricksScaleModelShop

6 ай бұрын

It's not too much work if you truly enjoy it and the positives far out way any possible negatives. Just saying! 👍

5 coats of clear ,what a joke

@ryurc3033

9 ай бұрын

You seem to be living somewhere outside reality.