Those plastic rivets at 1:20 can be removed by just pushing the pins through, I used a very small allen for instance. To reinstall them just push the rivet in first, and then press in that pin. Thanks for this video, I followed it and fixed a slow leak on my 5 series.

I pushed the center pin on the rivets in, but they can get lost in the fender well so would be good to buy some backups. Also, I put a small amount of vaseline on the o-ring to help it seat and seal. Finally, I put zip ties on the filler neck opening (between the reservoir and fill neck) to "clamp" it tight on to the o-ring. The plastic can fatigue and stretch a little.Not sure how much it helps but it is extra peace of mind.

Have same problem, thanks for the info

My 2006 M5 leaked, mechanic fixed it. My 2015 M5 is leaking, will try to fix myself! Thank you!

Thanks man

Thanks a lot 🙏

Thank you!!!!

Do you remember what the thickness of the new o-ring was?

@SummermoonUK

24 күн бұрын

7/8 ths.

my washer fluid (BMW X5 E53) started to leak after I had my BMW serviced in the authorised BMW servis 😂 they exchanged me one front Xenon light + igniting sparks, since then it takes 14 days and my full washer fluid reservoir is completely empty, they fu.ked something up during exchange!!!

Size ring 25mm/2,5mm=25/30mm

Hey, I have the same washer fluid leak, could you give me the exact dimensions? I am from Europe, I understand that 1inch = 25mm? Which CS or OD dimensions i need?

@user-ys7el1cx1s

Жыл бұрын

In size 25mm/2,5mm=25/30mm

Can you provide the dimensions of the O-ring?

I would guess that a BMW uses metric dimensioned O-rings vs. imperial sized O-rings -

Where did you buy O ring from?

@AutoDad

Жыл бұрын

Local hardware store

Man what happen to the JB 4?

@AutoDad

Жыл бұрын

I made a video on it

You think it be the same for a 2016 m4?

@AutoDad

Жыл бұрын

I am not sure of that

God forbid you drive in the rain