This video is as good as it gets, very informational and to the point, thank you from Florida Greg.

@foxfamilyheatingandaircond4696

2 жыл бұрын

Awesome! Thanks!

@truthmatters6719

Жыл бұрын

​@@foxfamilyheatingandaircond4696 great video sir! Just a quick question, if there's no liquid line service valve how do I measure superheat?

The way I was trained was to verify Airflow (filters, coils, fans, obstructions) then Electronics (motors, capacitors, controls) before ever putting gauges on. In 10yrs residential and light commercial I've found far more bad customers than bad TXVs. This is a great video, thank you.

@rickacton7540

Ай бұрын

whats a "bad customer"

Actually with the 2007 regulations. Systems did not get more efficient with txv's. Its was because the suface area on the evap and condensor coils got bigger to absorb and reject more heat and humidity. Goodman proved this while staying with a piston metering device.

@marcost9461

23 күн бұрын

Yes 100

I had a TXV diagnosed some years ago and they asked me for a glass of ice water. At the time I didn't know it was for the diag process but learned a minute later. He correctly called for the TXV. And yes, the system did perform somewhat better while the part was on order. Thing is, I kept the system operating right on the knee between function and failure by resting it periodically when it began to faulter so when he got here it was a no brainer compared to what it might have been. In other words, I did not let the compressor go thermal but the temps/pressures were still off so he could see in a snap what was up. Thanks for another nice tight discussion.

I like that temperature method,Thanks for sharing

I loled at the guy hammering the tire when you said tap on it with a tool

Great explanation! As a first year tech, I can't tell you how helpful this is to grasp the concepts of refrigeration. The illustrations we're especially helpful.

@foxfamilyheatingandaircond4696

2 жыл бұрын

Perfect!

@LuisLujan-xc7bd

10 ай бұрын

Could you please share the illustrations? I'm having a hard time opening the link. I'm guessing it's no longer good

Thanks great explanation of TXV operations ..30 yrs in & I take notes ..Tks again newbies will really Love the tutelage

@bikerbobcat

10 ай бұрын

Every day I learn something new.

All your videos are thoroughly presented. A real teaching moment. Thank you.

Thank you for sharing this video.

Excellent video and explanation. Thanks

@foxfamilyheatingandaircond4696

2 жыл бұрын

Awesome. Thanks!

Great info thanks

Great video

Keep up the good work

I use the field piece smans. When talking to other techs about my pressures I always give them both pressures and temps

@InsideOfMyOwnMind

2 жыл бұрын

That's great, and then if they ask you what refrigerant you're dealing with you just learned something about the tech you're talking to.😂🤣😋😎

Thank you so much!

Good video

Thanks

With a heat exchange unit also can you cycle from heat to cool to see if the valve frees up? Would this damage anything doing this when the ambient temperature is in the high 90,'s to low 100..?

Great video. Where can I get the flow chart? The link is broken!

Excellent video, my installer wants to replace my TXV for the second time ( replaced with a piston while txv was ordered) on a 2 year newly installed SEER 16 Goodman Heat Pump. My temp is set on 77 degree but runs for 25 min on and 5 min off to do the job, this doesn't sound right. I need a good A/C tech in SW Florida.

@anthonybernier9952

10 ай бұрын

Are you near Pensacola Florida?

My man

Great video Greg, but to get flow chart for txv?

@foxfamilyheatingandaircond4696

2 жыл бұрын

The link is in the description down below

what is the step where it is correct subcool but high superheat? I dont see it on a the chart.

Anywhere of getting that chart

Very good information. Thank you

Does anyone know where to find this flow chart on the video? I click on the link but it is expired

I had one intermittently making the compressor pull into a vacuum

@foxfamilyheatingandaircond4696

2 жыл бұрын

Yep. Sounds right

When looking for txv everyone says to look at evap core but on york they are in the heat pump. Should I use super heat or subcool? Thanks!

@robertcherry4971

2 жыл бұрын

There should be one TXV at the condenser and another TXV at the evaporator on a Heat pump.

Hello, why does every CARRIER i put in (litterally 10 outta 10). always have 18-20 superheat and low liquid line pressure. Even with 13 subcool. Each install i spend like 3 days checking back and stuff. And I follow manufacturer installation religiously.

@xincai951

6 ай бұрын

Have you figured out why? Do you need to adjust the txv?

@seek3n

6 ай бұрын

@xincai951 no. They dont come with adjustable txv. I have to over size the coil at least half ton or slow down the fan 😅

most of those checks should have been done before putting on the gauges, but very nice flow chart!

@josemartinez-jt6tw

Жыл бұрын

Definitely right bro

From where we order TXV valve?

@foxfamilyheatingandaircond4696

Жыл бұрын

Look for your local hvac supply store

oat, iat, sst, lst, sh, sc. KZread makes the jokes with that flow chart. Tesp & use the dumb chart in the manufacturer install manual to (don't worry the installers chucked it in the trash for you) guesstimate your airflow.

Txv

Hreat

Must be the txv

The link to the flow chart is dead.☹

Great video

Good video