How I Block up a Garage Door - Workshop Upgrade Part 3

Тәжірибелік нұсқаулар және стиль

In this video I'm blocking up the garage door as part of my workshop upgrade to v2.0. I don't use the garage door on the workshop side - it lets in a huge draught, has zero insulating properties and I can't attach stuff to it. So I'm blocking it up using a stud framework and 18mm MDF sheeting. Enjoy and don't forget to Subscribe!
Read the full article here:
gosforthhandyman.com/blocking...
Full playlist of this series:
• BUILDING A GARAGE WORK...
Join the Member Zone for extra stuff:
members.gosforthhandyman.com
Buy locally sourced T-shirts and other lovely stuff from our little shop:
gosforthhandyman.com/shop/
Help me let you know about new vids - subscribe to my free newsletter here:
gosforthhandyman.com
TOOLS & PRODUCTS I USE: gosforthhandyman.com/products...
INSTA: / gosforthhandyman
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2021. All rights reserved.
#Workshop #WorkshopV2

Пікірлер: 23

  • @richarddunn504
    @richarddunn5043 жыл бұрын

    Hi Andy, Any reason you chose Knauf brand? Was it acoustic insulation? And how thick? Many thanks

  • @phil9625
    @phil96255 ай бұрын

    Came to see how I could do this, enjoyed some Radiohead too. Even the sped up version of creep at the start 😂

  • @DJMills
    @DJMills3 жыл бұрын

    What are the dimensions of the timber and the insulation? also is it cavity or loft insulation?

  • @Mr_Gadge
    @Mr_Gadge3 жыл бұрын

    Did you leave any gaps in the mdf for expansion? Can't see it realllly being a problem in UK lol? Maybe for four days a year when it's redders. I went OSB as I got it dirt cheap but I keep seeing "oh you must leave a gap!"

  • @futbol1972
    @futbol19722 жыл бұрын

    Do you think this same method would work for my 3 fully insullatwd car garage. I have a pool table, TV, darts, gym in there and the 2 car garage door we don't use it at all so I will like to put a temporary wall so it will be more cozy and use the wall to hung up stuff too?

  • @byroncudworth6918
    @byroncudworth6918 Жыл бұрын

    Noticed you listening to Radiohead. I need to do this to my garage soon.

  • @umairidrees7291
    @umairidrees72915 жыл бұрын

    Thank you for the video. I am planning to do the same in my attached single garage. I am just slightly worried about damp settling into the garage, as I plan to totally seal the stud wall with sealant on the sides. This would block any ventilation, hence help damp to form. But it would help keep the garage warm I am hoping. Any advice in regards to the damp at all please? I am really confused in this regard, but would really like to go ahead with this project in order to make my garage look more like a room, and become much warmer hopefully. Kind Regards Umair

  • @GosforthHandyman

    @GosforthHandyman

    5 жыл бұрын

    I sealed the bottom edges of the base plate and painted it to protect the wood - on the door side. It's then just sealed on the inside. As there's plenty ventilation around the garage door itself any dampness in the cavity should dry out fine. Never been an issue for me. 👍

  • @umairidrees7291

    @umairidrees7291

    5 жыл бұрын

    @@GosforthHandyman Thank you very much for your help. Honestly! I've been very confused about this matter.

  • @yourbffnat3602

    @yourbffnat3602

    2 жыл бұрын

    @@GosforthHandyman thank you for this response!

  • @edvardaspaskevicius3858
    @edvardaspaskevicius38586 жыл бұрын

    Firstly thanks for this great video. I would like to ask you how you made sure that no water would leak through the garage door into the isolation and the walls you put up. We are thinking about doing the same to our garage door as a temporary solution.

  • @GosforthHandyman

    @GosforthHandyman

    6 жыл бұрын

    The bottom plate of the stud is painted and sealed with all weather sealant - I haven't sealed the door from the outside as I'd rather air could circulate so that if any dampness does get in it can dry out naturally. All fine and removable in about 1-2 hrs. 👍😀

  • @richardnoble7170
    @richardnoble71706 жыл бұрын

    what has the improvement been like? Still Baltic or more Italian?

  • @GosforthHandyman

    @GosforthHandyman

    6 жыл бұрын

    Defo more Italian... and massive improvements on sound insulation too. 👍

  • @GregWallis
    @GregWallis6 жыл бұрын

    Is there any reason you used MDF over OSB? Just curious.

  • @GosforthHandyman

    @GosforthHandyman

    6 жыл бұрын

    More dense (so better sound / heat insulation), easier to paint and about the same price. 👍

  • @GregWallis

    @GregWallis

    6 жыл бұрын

    Gosforth Handyman Ah, makes sense. Thanks for the reply.

  • @corettasimonis3847
    @corettasimonis3847 Жыл бұрын

    Can you remove the horizontal rails without messing with the tension bar?

  • @TheSoundofRainfall
    @TheSoundofRainfall4 жыл бұрын

    is this legal? ive heard towns wont let you do this to create more legal square footage to replace the garage

  • @ariannafrancisart9068

    @ariannafrancisart9068

    4 жыл бұрын

    It doesn’t count toward the livable square footage of the property. It is allowed here, in Washington state. No permit needed unless adjusting the current HVAC to the garage. Then everything must be updated to code and can get very $$$$$

  • @a.miller3176
    @a.miller31765 жыл бұрын

    If this video is suppose to teach the viewer it’s too fast. Not very informative.

  • @GosforthHandyman

    @GosforthHandyman

    5 жыл бұрын

    That's OK Anne - it's not supposed to teach the viewer. 👍

  • @callump4302
    @callump43026 ай бұрын

    Got a navy blue fleece in large if you want it

Келесі