Love those wheels and tyres, Phil - the dogs bananas! Good speed, well fast enough for most of us Tamiya fans, so glad that beauty of a car came out unscathed. Cool montage as always, mate! :)

@TomleyRC

4 жыл бұрын

Thanks Mark, I was surprised at how well it handled that speed. Wish the rears were a little better fitting though

Great video...just made my first BG purchase cant wait to get it in the mail

I’ve just bought this car. Now even more excited to get all the extra bits gathered and get it built!!

loving that body! fastest tamiya I think I've seen! Just spent the afternoon fitting steel diff to my x-flamingo! speed run coming with it tomorrow

@TomleyRC

4 жыл бұрын

Yes, such a nice body! I'm interested to see how fast your Flamingo is... I wasn't going to run mine 3s, but I'll wait to see your speed first haha. The metal diff means you can really open it up!

That looks like it going aswell as my old TA02SW did on a nicad flight pack from.back in the day. Love it. Great work and that's fun

@TomleyRC

4 жыл бұрын

Love the TA02SW chassis. Not got around to doing my build yet.

Really nice upgrades bro!! Really nice fast! Yeeaaah!!! Big like!!

@TomleyRC

4 жыл бұрын

Thanks dude

Some great info there, Phil - nice one, thanks! 👍

@TomleyRC

4 жыл бұрын

Thanks mate

Great kit and run! I'm tired of rc guys saying Tamiya can't go fast lol..this is proof that they are fast even with budget brushless systems on 2s

Beautiful car. Well done.

Wow, that is on fire 🔥

@TomleyRC

4 жыл бұрын

Yes mate, very fun and fast!

The Porsche looks great and has a lot of power. Great video my friend :)

@TomleyRC

4 жыл бұрын

Thanks 😎👍

Great stuff Phil. Not quite 50mph but plenty quick enough. Useful info about the tyres. Never even thought about foams before as I thought they were only for indoor racing. Nice and cheap too!

@TomleyRC

4 жыл бұрын

Thanks Pete. Yes, foams... I discovered them about 3/4 yrs ago while doing some speed runs (was actually a TA03 chassis then as well! ) . Give them a try

@modelnutty6503

4 жыл бұрын

yup, last video on this car I suggested foams too. the only real drawback with them, if you hit a little pebble there's chance of a big chunk of foam getting torn out. we used to sweep a private 4 court tennis court to run on, using bungee cords to pin the end nets up. after its swept clean the traction is fantastic for pan car oval racing. the tennis club owner+members LIKED letting us run there same reason, no dust+dirt to let your feet slip when playing tennis. we'd hit the courts early Sunday mornings, people sleeping in or going to church, so tennis players would maybe arrive about noon. the concrete or asphalt was perfectly FLAT... hard to tell which because of the sand filled paint covering the whole deck. the traction when cornering, there's really nothing like it, it'd take about 1/2 hour for 4 of us with big push brooms to sweep the whole thing, is also why the owner and members liked us playing there.

Looks awesome and great speed

@TomleyRC

4 жыл бұрын

Thanks mate

I love it !!

So cool

Great looking car.

@TomleyRC

4 жыл бұрын

Yes agree... one of the nicest recent Tamiyas

Tamiya knocked it out of the park with this car..............awesome bought one.

The way you got it set up now it runs amazingly well. Only thing i would do is paint the rims, maybe white to match the body.... Sweet !

@TomleyRC

4 жыл бұрын

They do them in white as well

bringing up an old video, but love the speed i am sorting a brushless M-06 911, and just found a set of contact foams so will use them, 3300kv motor figure i might get high 30`s plenty for me

Lovely shots again and you're teasing me even more to go buy one.

@TomleyRC

4 жыл бұрын

haha.. get one!

I had the same problem with the lock screw at my first run.

48 mph !! What a tease!!!! 👍

@TomleyRC

4 жыл бұрын

Yeah...I was sure it would do 50! But I think 48 will do lol

Cool. I just scored a kit from 1997 911 gt1 rear engine I believe . Its put together, but it needs some love. Now I see it definitely has potential...

@TomleyRC

3 жыл бұрын

Nice!

Nice Video! Where did you buy the other Wheels/rims (The ones you were not using in the video)?

Thanks great video. Where did you pick up the wheels from?

Sweet car! It looks like it’s going 100 MPH!✌️

@TomleyRC

4 жыл бұрын

Cheers Rick

What are the max speed approx on this? I have a TA03RS chasis that is missing a motor, its pinion, a esc and transmitter and a battery! Not sure what would be the best to buy so kinda hunting around for ideas, ideally I'd like to modify it to be FPV and potentially long range, also trying to consider what it would be like on 4s or 3s batteries

May not have hit 50mph... but it's certainly not SLOW! Very impressive bit of Kit! Carmine ✈🚂🚙

@TomleyRC

4 жыл бұрын

Yeah so close... I was sure with extra traction and stability it would hit 50... but 48mph is still a good speed.

This would look incredible with an light kit!

That's it, I'm getting one. Can I ask what servo you're running please mate? The one in my tt02 is hump!

Very fast on 2s . Need one of these .

@TomleyRC

4 жыл бұрын

Yes, decent speed.

Hi Tomley what Do you think about this chassis TA-03 compare TA-02 Cheers

This is good work, Phil. So, if an object accelerates from rest to 20 mph in one second, it pulls 1g. I wonder if it´s a linear progression - if the car could accelerate to 60 in 3 seconds, presumably it´d be pulling 1g throughout. The quickest vehicle I´ve ever owned was an FJ1200 - it felt pretty hard to hang on to the handlebars under max acceleration so I´m a bit surprised to learn that it was pulling less than 1g (it took over 3 secs to reach 60). What a difference foams make!

@TomleyRC

4 жыл бұрын

Well I'm not sure if it works exactly like that but you are probably not far off. And you could say it's actually pulling 2g as we sit at 1g all the time due to Gravity (Science with Tomley... new feature haha). To compare, my Arrma Limitless does 0-60 in 2s... and 2g on my readings.

@MarkBryanRC

4 жыл бұрын

@@TomleyRC Hehe - Science with Tomley - love it mate!!! :))

You should see the new GT3 body that they're coming out with it's based on the brand new one that came out this year or last year.

What did it cost you? I’d like to get an Porsche 997, 991 or 992 that goes 20MPH. Any advice? I am in the USA. My budget it’s $100

Nice video tomley what's the top speed you have got a tamiya TT02 up to? I have a 3s brushless rally one that does about 35mph and I was wandering how fast you might have got one to go. Love the content by the way and all the best my friend:)

@TomleyRC

2 жыл бұрын

I think I got a TT01 to 40mph+. Hoping to get some more Fast Tamiyas on the channel next year

@fireuprc5693

2 жыл бұрын

40mph-Fair enough. I’ll look forward to seeing those videos next year:)

Defo need some better offset wheels just for looks. I wonder if 3d printed wheels would work at that speed

@TomleyRC

4 жыл бұрын

Yeah, better offset needed! I think 3D printed would work, as long as they don't take and big hits

What is the GPS setup you are running in the video?

Are you driving and recording? Btw I see you testing the speed with an app, do you have a speed meter on your car or is it digital?!?!

@TomleyRC

2 жыл бұрын

Yes, I drive ones handed. It’s a Skyrc GSM020 with an app

And what is the brand of this combo ? Motor, esc. Merci !!

Thats a nice setup. Did you remove the fan on the on the esc or does the 60a come like that?

@TomleyRC

4 жыл бұрын

I removed the fan mate, another reason I am not planning on 3s runs... I don't want it to overheat

@originalboon

4 жыл бұрын

@@TomleyRC Cheers - i have a 2S Df-03 i am struggling to get a good ESC that fits in there its really tight and most fan units are out!

Too fast 💪😜

How much does it cost? En were you can buy it

Very nice video.Where did you buy the brushless system ?

@TomleyRC

4 жыл бұрын

eBay

@rcaddiction1709

4 жыл бұрын

Tomley RC ok Thank you

Thats a really nice body you got here 👍

@TomleyRC

4 жыл бұрын

Thanks 😎

Hi, it s an 3900kv ? Merci beaucoup 😊😄👍

Is this rtr?

Opening a dpnao FM portable radio connecting wires to a separate speaker

I picked up a 144001 recently. I am taking it to the beach in a few weeks and need some advice for some wheels and tyres that are suitable...

@lemongorengpeng

4 жыл бұрын

It is suitable on sand and gravel

@Mini-z1994

4 жыл бұрын

Id go with some paddle tires for sure. Like say perhaps the traxxas 1:16th scale slingshot 2.2 should be good even if they might be close too or smaller diameter. these are pre mounted ones I've linked too here. www.prolineracing.com/tires/sling-shot-2.2-sand-tires-mounted.asp They are quite expensive though being like 30 usd for 1 pair. Otherwise monster truck style tires from something around the same size like these are pretty good & will dig into the sand pretty well, you pretty much want consistent wheelspeed and not stopping or reversing otherwise when you drive it about there. www.banggood.com/4pcs-ZD-Racing-6455-RC-Car-Wheel-Tire-For-Monster-Truck-116-9051-9053-9055-RC-Vehicle-Models-p-1575833.html?rmmds=category&cur_warehouse=CN

@scot0811

4 жыл бұрын

Try and find some paddle tyres! Great on sand and if your rc is fast enough, might even hydroplane

@misterfosteresquire

4 жыл бұрын

I have looked at paddle tyres but have no idea about size / fitting

@misterfosteresquire

4 жыл бұрын

Standard tyres are suitable? If I drive it on light dust or damp it is all over the place.

Is very fast for 2s!

WowZzz

Yeah, the GT1 looks super cool, but you can get a clear shell for £27, and then do some 3s runs! 😉

@TomleyRC

3 жыл бұрын

I don’t have any more plans for this one... but a very fast Tamiya will be coming in the summer!

@wordreet

3 жыл бұрын

@@TomleyRC I look forward to that!

Oh wanted to ask if u found me thing yet lol lmk thanks

What's the name of that app your using

@TomleyRC

3 жыл бұрын

GNSS PA, but you need the SkyRC GPS module as well

@Godidear

3 жыл бұрын

@@TomleyRC ok thanks

@Godidear

3 жыл бұрын

@@TomleyRC can you give me link for the skyrc GPS module

Maybe get a taycan body well be awesome:-))

@TomleyRC

3 жыл бұрын

That would be awesome

Is that Lincoln

@TomleyRC

4 жыл бұрын

Yes 👍🏻

Very nice car, but sounds like the body is dragging now and again.

@TomleyRC

4 жыл бұрын

Yes, now and again it's rubbing. I like the low stance

Never ever use red loctite, always use blue loctite... unless you want to glue that permanent. And this is coming from full scale mechanic work experience, I can't imagine what red loctite will do to a tiny RC gun screw. Because if you ever need to replace that white plastic pulley, or belt, or the bearings behind it.. you will have a hell of a time doing so. The only way I know of losening red loctite is with heat, which means holding the tip of your solder gun to that set screw until the red loctite degrades enough for the screw to turn... and like I said, that pulley is white plastic which means it will melt.

Hi

The correct name of the car is pronounced PorschE and not Porsch! 😏 Greeting from Germany

Pour-Sha

666th 👍 😉 😉