Man that thing cuts good and looks to be well built.

@TonysTractorAdventure

2 жыл бұрын

It does cut good. I ended up selling the mower to a family member after his broke. We will not need it for a bit as we develop this land. I will mow with a flail mower until all the ground work is done and a proper yard is planted.

"Fittin' t' show ya!" That's just funny stuff right there, Tony! Thanks again for just doing what y'all do. Keep 'er comin' on!

@TonysTractorAdventure

3 жыл бұрын

Thank you. Working with the tractors today

Nice work, Tony. I'm pulling a 6 ft finish mower with my T264. The lil' beast handles it like a dream. Such a time saver!

@TonysTractorAdventure

3 жыл бұрын

Nice. I have really enjoyed my T264.

@bendhy6993

10 ай бұрын

Hello, thank you , I was wondering what size of a finish mower in should buy. I have a Solis 26 hp, do you think it will handle a 6feet finish mower to cut land thick grass ? The French man thank you in advance for your advice :)

Very nice job! Just got a finish mower the exact same one as you have! I loved working with it today! Very nice job Mr Tony, thank you

@TonysTractorAdventure

3 жыл бұрын

I look forward to your videos with the mower

@caydensoutdoorlife4547

3 жыл бұрын

@@TonysTractorAdventure yessir! I actually used it today for the first time and cut down a field! I filmed it😊😉!

I'm learning alot by watching you thanks for sharing 👍

@TonysTractorAdventure

Жыл бұрын

Thank you so much.

Nice video Tony, the T264 is a very versatile tractor I have a 72 in. finish mower that I use it handles it just fine, also have a front blower and york rake for it, here in Maine the ground is just drying out.

@TonysTractorAdventure

3 жыл бұрын

We worked hard today. Almost got the sawmill pad ready for gravel.

That’s awesome, somebody with lots of grass to cut should consider that size tractor and finishing mower, it would wear out three or four big box store lawn mowers plus all the other uses of the loader and tractor , another cool video

@TonysTractorAdventure

3 жыл бұрын

I agree. Both the tractor and the mower are lifetime purchases. If they are maintained, they will last a lifetime.

great tip on using the grapple as your finder!

@TonysTractorAdventure

Жыл бұрын

Thank you.

Great work, so sorry about your window. 😞 God bless.

@TonysTractorAdventure

3 жыл бұрын

It happens. It was a great day still, and could have been a lot worse.

Show us brother, show us! Lol! Awesome video!

@TonysTractorAdventure

2 жыл бұрын

Thank you.

Great upload my friend !!!!

@TonysTractorAdventure

3 жыл бұрын

Thank you

Ouch! That was pretty much right in the center of the window. I noticed Tonya was filming you as the rear of the mower (the discharge) was in her direction. I hope she was shielding herself. Y'all stay safe!! 👍🚜 Nice work!! I can smell that fresh cut grass!

@TonysTractorAdventure

3 жыл бұрын

She uses a long lens and stays a long way away. This still worries me..

Great video buddy hope you’re doing good god bless

@TonysTractorAdventure

3 жыл бұрын

God Bless you too! Doing great

nice job Tony ,

@TonysTractorAdventure

3 жыл бұрын

Thank you

A $500 pretty cool, I loved that one

@TonysTractorAdventure

3 жыл бұрын

Yep. My wife always sees the beauty in stuff. It is her gift.

Actually, it looks really good.

Just like child's play tony

@TonysTractorAdventure

3 жыл бұрын

It is

Dang that sucks about the window at least the tint helped keep most of it in place to clean up easily

@TonysTractorAdventure

3 жыл бұрын

It was not to bad. Still a good day.

Which one of your T25/T264 Videos shows the best demonstration of the hydrostatic transmission? I would love to see a short video on how it goes on flat vs small hills etc. Thanks in advance for the great content.

@TonysTractorAdventure

Жыл бұрын

If you close your eyes, you would not know if you were on a t25 or a t264 in how the transmission works. They are the same transmissions.

A lot better cut than a brush hog or a riding mower.

@TonysTractorAdventure

3 жыл бұрын

I agree. I am impressed.

Tony, what is the highest setting on finish mowers? The reason for the question is because I want to mow my pasture feild but I want to mow it at 5-6 inches high.

@TonysTractorAdventure

3 жыл бұрын

I would guess about 5 inches. I set mine when I got it and never looked back.

i just noticed a goose on your 1/2 ton. what size is your trailer and weight? how do you find it with a 1/2 ton goose vs bumper?

@TonysTractorAdventure

3 жыл бұрын

The trailer is 7000. GVW. Because it is s gooseneck, I can transfer about 1200 pounds into the bed just forward of the axle. It rides so much better than a bumper pull. We use it a lot, so it was worth the investment.

Tony I need your help bad. My TYM dealer is the absolute worse in the business. First I was told the tractor would be delivered in 10 days. Then today they tell me maybe not even by the end of the week. They became more backed up because, they used some of their techs to work on a building in their yard. I contacted the owner. (Big dealer too, serves two states) He basically told me he would cancel my order if I wanted to go elsewhere and that once a deal begins bad it usually only gets worse. I can’t believe he emailed me back that! HOLY CRAP! I take it he doesn’t GAF about customers at all. Is there a near equivalent tractor and equivalent price as the TYM 264. I just don’t want to keep moving forward with this dealer.

@TonysTractorAdventure

3 жыл бұрын

My friend, I have no control over dealers. They own a franchise and are their own boss. Every brand tractor is like this. I would call and talk over the phone. It is hard to read feelings in an email.

Boa tarde máquina muito top amigo

@TonysTractorAdventure

3 жыл бұрын

Obrigada. Gostamos muito do nosso trator e dos implementos do trator. Isso torna o dia divertido.

End of the video made me sad. Though, happy your wife didn’t get hit with the rock. God was looking out for her 😉

@TonysTractorAdventure

3 жыл бұрын

Yep. God Bless

what kind of hydro top link lets you free float? I was looking at the setup and wondering why you weren't using a chain and then you say it can float. is that any hydro top link?

@TonysTractorAdventure

2 жыл бұрын

I have never seen any 40 hp tractor or lower with float on the rear remotes.

I've done that to windows before, not fun paying for them if you don't have insurance lol

@TonysTractorAdventure

3 жыл бұрын

I have good insurance, but it is cheaper sometimes, long term, to just pay for it.

@Archermotorcycleandtire

3 жыл бұрын

@@TonysTractorAdventure I know what you mean!

what size grapple were you using at the start of the video?

@TonysTractorAdventure

2 жыл бұрын

It was 60”. Check out our newer videos. We have the perfect grapple now. Dual clamps and only 260 pounds.

Why brand and model of finish mower are you using? Would you buy another one?

@TonysTractorAdventure

3 жыл бұрын

It is a Phoenix finish mower made in Italy. It has been rock solid.

Yet another example of why flail mowers are the way to go. They throw debris DOWN instead of OUT like a bullet like a rotary/finish cutter/mower

@TonysTractorAdventure

2 жыл бұрын

I agree. We no longer have this mower.

@WaldenSpawn

Жыл бұрын

What happens when a flair mower hits a boulder? I have several in my 15 acre field and as hard as I try to avoid them almost every time I hit one or two and it doesn’t hurt my bush hog.

@TonysTractorAdventure

Жыл бұрын

Hitting a boulder most definitely hurts a conventional rotary cutter. It takes big chunks out of the blade. It causes the blade to become off-balance. It cuts like crap after hitting and will ruin the gearbox bearing very fast if you keep mowing without replacing the blade. It is quicker and cheaper to replace only the damage cutters on the flail mower. I never recommend mowing rocks. 😁

@Noah_E

Жыл бұрын

@@WaldenSpawn Since the blades are independent and not hard mounted to the drum they deflect out of the way with minimal damage. Especially if they are Y blades because they are so light. Worst case scenario if you are using heavy hammer blades and sat there letting them beat against a boulder you might wear the end enough to require replacement. But they are cheaper and easier to replace than a brush hog blade.

@WaldenSpawn

Жыл бұрын

@@Noah_E ok cool that makes sense to me now, sounds like it would work for me then

Ouch 😢

Does the mower have mulching blades on it?

@TonysTractorAdventure

3 ай бұрын

Yes, heavy duty

Sorry about the window, right pain. Mower job v good!

@TonysTractorAdventure

3 жыл бұрын

It does mow well.i am very pleased with the tractor

@TonysTractorAdventure

3 жыл бұрын

It could have been worse

So my dad is about to buy 5 acres and a house. Would you do the finish mower over a zero turn. I was gonna let him use my 22 pto hp Mitsubishi tractor.

@TonysTractorAdventure

Жыл бұрын

If mowing is all that will be done, a zero turn will mow much faster. If you want to till the garden, move some dirt, clear some brush, etc. after you mow, then a tractor all the way.

@Atreyas

11 ай бұрын

Don't know if you've already made the purchase or not, but I'll throw my $0.02 in anyway if it may help someone else. I purchased a farm that had about 4 acres I have to mow, 12 when I do my pasture. Initially I bought a 60" zero turn, and loved it.. aside from all the times I got it stuck, which was often, since my property is somewhat hilly, and I have a pond with sloped banks (ZTs are absolutely worthless on grass that is remotely damp, and on a hill). It still did the job, but I was cussing it at some point every time. Recently I purchased an older Ferguson 35 and picked up a 72" finish mower.. I absolutely love it. It may not be faster, though it could be if I were comfortable in a higher gear, but it's.. easier. Zero turn you're constantly pushing/pulling the sticks.. tractor is set and forget, turn the wheel every now and then. It's more cumbersome getting into tight places, but can do most of them, I'm more confident with it around the edge of my pond, and it's great in the flat areas as I can just sit back and let it go. I still use both, as the zero turn is great for zipping around the fences and trees, but the tractor cuts the majority (wife can also run the ZT if she wants while I'm on the big guy).

Need to be a John deere

@TonysTractorAdventure

2 жыл бұрын

Why?

your talking gratpull not finish mower?

@TonysTractorAdventure

Жыл бұрын

There is a finished mower on the tractor. Not sure what you're talking about.

lucky that small rocks did'nt hit cameraman.

@TonysTractorAdventure

2 жыл бұрын

Not lucky. Long lens professional camera.

1st

@TonysTractorAdventure

3 жыл бұрын

Not sure what that means

@Archermotorcycleandtire

3 жыл бұрын

@@TonysTractorAdventure 1st to comment

@TonysTractorAdventure

3 жыл бұрын

😁