Can't believe garages think that this is safe and acceptable, thank God for you.👍👍

I’ve seen this temp sensor “hack” before. It used to work on the very early versions of emission controls (I’m talking about the Denoxtronic adblue pump era). Back in those days, you basically had zero emission monitoring until the exhaust had reached a certain temperature. So if you had some sort of active fault on the exhaust system, for example “Nox levels below threshold”, or “EGR low flow”, you could simply delete the fault, and the ECU wouldn’t re-check the fault again until the exhaust had warmed back up. As soon as the working temperature was reached the ECU would see the fault and the EDC light would illuminate again. So here’s where the hack comes in. You delete the fault, and remove the temp sensor, no exhaust temp = no emissions = no EDC light! Of course you had to keep the temp sensor wiring plugged in, otherwise the ECU would detect an open circuit on the sensor. It was also a good idea to plug the exhaust, either with a blank, or an old temp sensor to give the impression nothing was tampered with (and to not gas yourself to death). During low exhaust temperatures, the engine would also use zero adblue as well, so haulers could save money by never having to refill their adblue tanks too. Engine manufacturers got wise to this hack years ago by updating the software to monitor the engine coolant temps, vehicle speed and engine load/running time to work out roughly where the exhaust temp should be at any given time. If the new software noticed that the exhaust temp never moved, even though the engine had been running, it knew something was amiss and would flag up an EDC light “exhaust temp parameters” or words to that effect. Hopefully that explains why that was left out, but the bottom line is, it doesn’t work anymore.

I wouldn't mind betting that the cabin filter has seen better days!

i think a lot of garages these days just want the easy jobs and cant be bothered with any job that requires any sort of investigation, we definitely need more honest people like yourself that have the proper knowledge and actually care about their customers. as always top notch video! big thumbs up from me

@ORileysAutos

Жыл бұрын

Jobs don't come much easier than this one

@colinmurray9448

11 ай бұрын

Never a truer word spoken keep her lit jimmy top class in all fairness 👌🇨🇮👍💪🤠👏

What a brilliant video. I’ve subscribed immediately. I’m tempted to say that the garage responsible has to be sued to bankruptcy!

@ORileysAutos

Жыл бұрын

Welcome aboard!

So glad I do my own maintenance on my car's, mostly because I don't trust these main dealers and sadly I'm in another country than you sir, well done again. 🙂

@James28R

Жыл бұрын

it wasnt a main dealer.

Fair play Jimmy ........ if only everyone was as competent !!

I had to replace the exhaust gas temp sensor on my Qashqai last year. Who on earth designs these things as the sensor was hidden at the back of the engine and almost impossible to get to. Had to remove offside front tyre, remove the plastic wheel arch guards, under the car, reach up full arms length and just about managed to reach it. After 11 years on the car, it was damn near welded into the exhaust and I had to cut off the wiring, cut off the probe to get a nut removal socket on it. Then, after a liberal application of WD40, I used a 24 inch breaker bar to get the remains of the sensor out. The relief when it eventually broke loose and I could get it out. Popped the new sensor in and car fixed. And yes, I do my own maintenance as in my experience, garages just don't take care of your car the way you would. Fair play Jimmy for another fix that someone missed......like how can you miss a sensor hanging loose from the exhaust?????

@sicks6six

11 ай бұрын

I said I would fit a new headlight bulb for a woman I know it took 3 hours, I had to access it via the wheel arch, like you, wheel off and liner out, for a BULB !

I've been binge watching your vids and love them. Shocking! That the sensor was not even fitted in the exhaust but not uncommon as I had some main dealer Muppets leave the NOX sensor out of my Sprinter exhaust with the wiring loom hanging over the exhaust claiming that the Chief Muppet that worked on it encountered some rust on the threads. Total fabrication as I threaded it in by hand and tightend with a spanner. I feel for customers that have no knowledge of vehicle systems and repairs because repair shops with no integrity will BS their way out of shoddy service and use smoke and mirrors as their main diagnostic skills

I may have an explanation for why that sensor was out - I have seen this problem before where it’s deliberately taken out , loosened, pipes to dpf pressure sensor loosened off or removed to relieve the pressure in the dpf , or to take it out of limp , had a few where this has been done then the car is sold on , cars coming to me and then im scratching my head as to what’s going on - crazy but it happens in this trade - very dodgy and It’s wrong - top work jimmy as always - keep up the good work , I’ve learnt a lot from you even being in the trade also so thankyou 👍

I hear about more and more instances of dealers not being able to handle diag faults on cars related to emission control systems. It's getting out of hand.

@michaelfraser5723

10 ай бұрын

because it's all based upon a CON, a con that promises everything and delivers even more filth

@michaelfraser5723

10 ай бұрын

LIKE " AD BLUE "

Well done love watching your videos good man keep up the excellent work

@ORileysAutos

Жыл бұрын

Thanks, will do!

Why do people go to halfords. Honestly

@TheOriginalDaveJ

Жыл бұрын

Can add quick fit to this list.

@SlimTortoise

Жыл бұрын

@@TheOriginalDaveJ and it seems main dealers.

@TimmysFavs

Жыл бұрын

Tyres and wiper blades only?

@TheFiXaS

Жыл бұрын

​@@TimmysFavsI wouldn't trust them even for those ..

@ritchieschofield1185

Жыл бұрын

Unbelievable that. Such an easy diag. Proper cowboys.

Excellent video jimmy, thanks 👍🇮🇪

Bless up sir riley

Well done as ever mate 😊

@ORileysAutos

Жыл бұрын

Thank you

The trade Is getting worse with people not knowing what they are doing and costing customers far to much money...

Thanks Jimmy ur da best keep up with your great work 👌

I've been watching many of your videos and will be contacting you soon, I have a peugeot boxer van with a blocked dpf, I've watched you sort many just like it so will travel from Norfolk to you rather than bother with local "specialists"

a lot of the smaller 1 -3 man garages only want to do the stuff most owners could do themself if they had a hydraulic lift, disks-pads, exhausts, drop links, wishbones, tie rod ends, etc when it comes to anything technical most of them don't have the equipment and wouldn't know how to use it if they did, it's down to the fact that apprenticeships dried up during the 1980s and everyone became a specialist at one job only, AC repairs, clutch replacements, tyres and exhausts, I've lost count of how many times I've gone to a garage and asked if they can repair something only to be told "we don't do that" and they refer you to someone else who does, Ok everything gets fixed eventually but the journeyman mechanics are now of the past, except for a very few like you, college and knowledge are everything, day release and block release are just distant memories now,

Consider change the cabin filter cloced with exhaust fiums

Jimmy's the best 👍

Your the best sir gbu

I had a job in a couple of weeks ago a Mazda 6 that had been into Halfords for rear brake pads and a couple of days after noticed a scraping sound when reversing? On inspection the lower bolt was missing from the caliper and it was scraping the inside of the wheel! It's not the first time I've had to put right a Halfords cock-up though? No qc on their services obviously?.

How did the drive put up with the exhaust fumes!

I hope Launch UK are looking after you Jimmy! ;-)

@ORileysAutos

Жыл бұрын

They give me some fluid here and there. They offered commission on any sales I can forward but I honestly declined. Don't mind showing the products for free if they work. I want to remain a free agent and not be affiliated with one brand

I like to see the smoke/steam coming out the back then clearing

We do a bit of roadside assistance and have seen a few hdi's with the temperature sensor out like that, threads ok but it just hanging there. Asked customers if they had any work done and they said they didnt.

@ORileysAutos

Жыл бұрын

Weird

I've got the same problem with a 65 plate Galaxy euro 5 Leaking fumes in the car also exhaust is smokey when speeding. Been to couple garages they said there is no split on the exhaust😔 but can't drive it like that

Another Good job... I think with places like halfords they are under a timed pressure to get the next car done from management so probably end up not doing a great job also probably lacking in experience as well

@loonaticsrunningtheassylum

Жыл бұрын

So are main dealers.. Pretty much all garages keep the whip cracking with "bonus pay" diag jobs will cost the technician a fortune.... Spoken as an ex master tech

Jimmy how do you get passed the oil dilution questions on a nissan note 1.5 dci

To be honest I watch most of your videos and I'd happily drive over to you have a good weekend 👍

@ORileysAutos

Жыл бұрын

I appreciate that

Halfrauds strikes again

amazing, bravi

@ORileysAutos

Жыл бұрын

Thank you! Cheers!

Do dpfs need to be cleaned with a cleaning solution at some stage or can your vehicle survive without the need to have them cleaned

Halfords Autocenters, what a suprise! and the prices £75 for a wiper!, £132 for a fuel filter!! and £400 for discs and pads!!! £1050!!

@ORileysAutos

Жыл бұрын

😬

absolutely appalling that another shop left this vehicle in this condition, despite the owner's follow-up complaints. Nifty little camera, be interested to see info on it

@ORileysAutos

Жыл бұрын

It's my Phone Samsung A22

@guygfm4243

Жыл бұрын

Bunch of muppets. Good job again

Halford don’t employ qualified mechanics, Son went there after doing 6 years at College then University in car mechanics was told overqualified. I would prefer that to I think I know what am doing mechanic

A friend of mine bought a 2016 Ford Transit van with adblue system from a dealer, so far he has spent over £3000 in its first year of ownership. Can’t keep that up so it’s going.

Thanks for showing us the receipt.... 😯😯😯😯😯😯 £75 for front wiper blades!? £132 for a fuel filter!? £250 for brake discs!? £162 for pads!? Where did these numbers come from? A monkey randomly typing into a calculator!? Halfrauds indeed. Bet this customer will just be going to you in the future.

@ORileysAutos

Жыл бұрын

He went for a dpf clean at first I think he said. Went back to complain about smoke smell and instead of looking into that they charged almost £1,000 for a service and brakes 🙃

@normanstephens5391

Жыл бұрын

@@ORileysAutos He needs to report them to Trading Standards. 100%.

@leeiverson145

11 ай бұрын

Halfords shouldn't be touching vehicles, I have been a motor mechanic for 30 odd years and I have had to deal with the cock ups they make as well. I wouldn't let them fit a wiper blade.

Good job that mate, 74quid for a wiper blade on a run of the mill ford wow

Go back to the garage and set about them......they must be cabbage brains..watching too much TV .....again brilliant stuff an education thanks

I have been looking into getting the launch cleaning system here in Canada. The gun is not currently available to buy but other nearly identical guns are available here in North America,since I have noticed that you have another brand gun-di you know of any reason why you couldn't use the other gun with the launch fluid!?

@ORileysAutos

Жыл бұрын

Yes another gun can be used

@stevetaylor2445

Жыл бұрын

@@ORileysAutos thanks very much for the reply

Excellent camera! What are you using for filming?

@ORileysAutos

Жыл бұрын

My phone. Samsung A22

@alexdragomirescu5084

Жыл бұрын

@@ORileysAutos Waw! When you put it behind the DPF the lightning was perfect and the focus on the threads was spot on! Why don't they make endoscope cameras with those camera sensors?! :))

Sue that garage.

I'm glad I have a Ford petrol

Good old Jimmy

Quick question about the dpf of my jaguar xf type . Not been driven for 2 years and now when I started it the dpf came on. Can I regenerate it myself by driving the car or do I need to clean/replace it?

@ORileysAutos

8 ай бұрын

Depends what type of error

@vlad.von.s

8 ай бұрын

@@ORileysAutos it just says dpf full 😕

Is a forced regeneration necessary or advisable after a dpf clean using the launch gun and solution ?

@ORileysAutos

8 ай бұрын

No. Not needed

@deanattard-sq6bi

8 ай бұрын

@@ORileysAutos Thanks for the reply bud. Really enjoying your videos !

Good job mate, I have one question.. does this clean ash??? Just watched a few videos of yours and you don’t mention anything about the ash content. Thanks

@ORileysAutos

Жыл бұрын

There is a lot of talk about Ash in the DPF and I can give you my view and what I have found. Ash accumulates in the DPF over extended use, as the incombustible material left behind following filter regeneration and soot oxidation. The ash consists of various metallic compounds originating from lubricant additives, trace elements in the fuel, and engine wear and corrosion products. The above statement is correct for what is called Final Ash. After the contamination has been burnt up this is what is left behind during the normal operation of the DPF. Cutting open a DPF reveals a super hard coal type of solid at the back. It is a combination of what has previously burnt and is very hard almost unbreakable. You can see that it has been exposed to very high temperatures and can withstand any amount of heat. Taking the DPF off and washing it through will do nothing to it. Some argue that the very biggest pressure DPF cleaners may remove some as it forces through the perforations and knocks some out. But, generally it will not be dislodged. This builds up very slowly. Final Ash can be at the back of the DPF taking up some room but the DPF is still serviceable and works fine. If the DPF has been re-generated many times, often by forced regeneration, this causes more Final Ash to build. Most Silicon-Carbide DPF's have a serviceable life of around 250,000 miles. At that point, you may have a DPF that is nearly half filled with Final Ash and then it is un-serviceable. This is rare, because of the amount of mileage needed to build this much up. This is not to be confused with loose ash formation, which is an ash created by the burn procedure. For instance, the wrong oil is used, which is not low SAPS (Sulphated Ash, Phosphorous and Sulphur.) During the burn process, oil is dragged up from the sump, burns in the cylinder and Sulphated Ash is formed. This fills a DPF very quickly, is not hard like Final Ash and can be removed, once the incorrect oil is changed or the problem fixed. Please ask any further questions that you may have and if I know the answers I will help. Best regards Jimmy.

@kayali8842

Жыл бұрын

@@ORileysAutos thank you for taking the time to explain in great detail, hope this helps others looking for the same answer

@mkha8247

Жыл бұрын

😂as1acwelmĺ mll❤😮

some garages do not have a clue or they dont want to waste time looking for the fault, There just interested in get the job done if they cant find the fault send the car on its merry way

How did that car even pass MOT with a gaping exhaust leak?

@ORileysAutos

Жыл бұрын

They said its nothing to worry about 😕

Wondering if the dpf has had a chemical clean and someone has removed the temp sensor to inject a cleaner. Although that technically should of been the no1 temp sensor pre dpf .😔

Next week we see a car that came from a main dealer with a stolen catalytic converter. No fault code was found customer was told to ignore it.

Halfords you surprise me (I don’t think)

Oisin should pay Ratso

Another Forb keeping mechanics in work. FOUND ON ROAD ""BURNT"" THE NEW FORD NAME

@almilhouse9059

11 ай бұрын

Mainly french seen as Citroen parts/engine

At least for a diesel the risk of carbon monoxide poisoning is minimal since diesels normally run lean. But it's not healthy to breathe anyway.

Dont say uch for Halfords

Good video just a little bit of advise when you have vehicle on ramps find someway of locking the wheels so there is no chance of rolling off you cannot trust handbrakes it take only one faulty when I was a apprentice had one roll. Off trapped me

@ORileysAutos

Жыл бұрын

In gear, handbrake on, chuck on rear wheel

garages dont care its a toss away society, all they want is people to buy new. theres hardly any skill nowadays

😌 Promo`SM

Nice compressor that Jimmy what model is it mate ? Your the man

Someone f--cked up big style, wish there were more people like you around 👍