How can you make your skateboard more stable? (stop wobbles)

Пікірлер: 77

  • @5inchdude697
    @5inchdude6972 жыл бұрын

    Fun fact: Wobbles come from the loose back trucks. Tightening your back trucks just a little bit will eliminate wobbles and dont over tight your trucks as it will lead to less control👍

  • @b.b754

    @b.b754

    2 жыл бұрын

    Thx that helped

  • @ArvensisAndromeda
    @ArvensisAndromeda4 жыл бұрын

    Thanks. This manages to be more informative than most videos I've found and you don't even talk. Respect.

  • @downhill254skate

    @downhill254skate

    4 жыл бұрын

    Glad you found it useful :)

  • @kuyadexstar5407
    @kuyadexstar54074 жыл бұрын

    I'm so glad I found you!! I'm trying to not lose all of my skin again and this will help tons-thank you :D

  • @downhill254skate

    @downhill254skate

    4 жыл бұрын

    It's a step in the right direction for sure :)

  • @wesleygreen340

    @wesleygreen340

    3 жыл бұрын

    Sameee

  • @lowcase_boy816
    @lowcase_boy8163 жыл бұрын

    Whole time vibing to the song

  • @zdhome5727
    @zdhome57272 жыл бұрын

    Watching this with a lot of bandages on me! I will definitely make these adjustments and try again!

  • @tristan1805

    @tristan1805

    2 жыл бұрын

    Haha same

  • @callie4808
    @callie48083 жыл бұрын

    recovering from a bad fall because I didn't have a well set-up board and was practising on steeper hills! i thought i was going to have to replace the board with a different one but im glad I can try out these adjustments! thanks!

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    You sound like you're doing DH seriously. Please get a proper board for downhill

  • @DaredevilGirlDiana
    @DaredevilGirlDiana5 жыл бұрын

    Cool video. Thanks for this.

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    Thanks for watching :)

  • @MaalysWorld125
    @MaalysWorld125 Жыл бұрын

    I’m on my 3rd day of shredding so I appreciate this info a lot. You looking hella steaz out there bro keep it up 🤙🏾

  • @emiliongo007
    @emiliongo0073 жыл бұрын

    This was exactly what I was looking for, great video

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    Good to hear :)

  • @dennvincentvaldez6768
    @dennvincentvaldez67685 жыл бұрын

    Actually this video is all I need to set uo my board properly. Thank you!

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    I'd say its more introductory than anything else. Please, please read up more on this!

  • @Skiddyskates
    @Skiddyskates5 жыл бұрын

    Great tips. Impressive video!

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    Saw some of your videos too bro! Keep it up

  • @HYPRdream
    @HYPRdream4 жыл бұрын

    Awesome video!

  • @WORLD_STXR
    @WORLD_STXR3 жыл бұрын

    2:14 I saw what that text in small font said lol. Thanks for the info very helpful.

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    It has taken 2 years for someone to see that hahahha

  • @marioelburro1492
    @marioelburro14923 жыл бұрын

    Thanks for the video. I stopped longboard but i want to hit faster speeds one day!

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    Sounds good! Just be safe

  • @Borex2
    @Borex23 жыл бұрын

    Thanks for tips

  • @LuckyXwX
    @LuckyXwX2 жыл бұрын

    how much should i thighten my trucks? im struggling with it. i dont do downhill tho i have a cruiser and i use it to go around the city but i dont knkw how much tight my trucks should be. My actual trucks can be wobbled easly like if i turn the skate upside down and touch the trucks or shake the table i can see them wobbling i think i should tighten em since i cant stand still on the table without turning liiiiittle bit but i dont know how much, any tips? like should the wobble a little bit or should they stand perfectly still and absolutly dont wobble?

  • @downhill254skate

    @downhill254skate

    2 жыл бұрын

    Tighten till you can't spin the washer with your hand

  • @DarylCook63
    @DarylCook632 жыл бұрын

    The irony is so thick here. If I’d just known then how to adjust my trucks, then I wouldn’t have had the speed wobbles… that caused me to crash…into a truck! DOH!!! I will never forget the school bus that slowly cruised by just after my crash, nor the faces of the children who witnessed my bloody accident…and whose maniacal laughter have since haunted my dreams. Kids can be so cruel. 😫 Great video, though.

  • @alirezahussaini88
    @alirezahussaini882 жыл бұрын

    Damn! thanks for this. And as i got new bushings because my old ones got damaged pretty badly. So when i put my new ones n started riding i couldn't ride it as it was just moving on right side n wasn't stable at all even when i was starting with kicking it. Is it also because i havn't tightened my trucks well?

  • @pesector
    @pesector5 жыл бұрын

    Awesome video, keep it up!

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    Thank you!

  • @samirisaacyuh2248
    @samirisaacyuh22483 жыл бұрын

    Ive already tighten the bolt all the way but one of my truck doesn’t feel stable enough, what should I do

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    New bushings or dewedge

  • @andrewphoto4750
    @andrewphoto47505 жыл бұрын

    I’m using a 93a chubby boardside/ barrel road side

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    Sounds good! How does i feel?

  • @andrewphoto4750

    @andrewphoto4750

    5 жыл бұрын

    Downhill254 - Kenyan Longboarding very stable at high speed

  • @andrewphoto4750

    @andrewphoto4750

    5 жыл бұрын

    Downhill254 - Kenyan Longboarding it’s the riptide krank they don’t squish

  • @Eveelynnx
    @Eveelynnx3 жыл бұрын

    Does it matter what bearings u use ? Like could I use bearings from different wheels

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    No. Bearings have the smallest impact

  • @Eveelynnx

    @Eveelynnx

    3 жыл бұрын

    @@downhill254skate thanks! Also, my board has been acting really weird since yesterday, when I go straight it turns left by itself.. I have pretty good balance so idk what happened. Could it be bushings fault? Do I need to clean them or 😅

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    @@Eveelynnx I think they may be worn or something. I'd take them out and see if they're worn or deformed funny. If so, replace em

  • @Eveelynnx

    @Eveelynnx

    3 жыл бұрын

    @@downhill254skate found the issue I think. When I ride over a crack the trucks loosen up by themselves :(

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    @@Eveelynnx time for new kingpin nuts

  • @chuckmaddison2924
    @chuckmaddison29242 жыл бұрын

    The type of truck is essential. If you want to go to the park and trick ride standard trucks great. But fast down hills ( keep out of sand ) Trust me on that. Reverse mount the only way. May not turn as well, more linear turning but speed great. Can't make he tight bend , slide . Keep away from double king pin unless you want a serious carve .

  • @huntermaxcy1489
    @huntermaxcy14892 жыл бұрын

    I just bought a longboard today and ate shit on it with my first 10 minutes because of it being too wobbly. this helped lol, I went down the same Hill after fixing my board and it was so much easier

  • @downhill254skate

    @downhill254skate

    2 жыл бұрын

    Glad it was helpful :)

  • @user-ij7md6wp5j
    @user-ij7md6wp5j3 жыл бұрын

    Thank you!!!

  • @nedandre1584
    @nedandre15843 жыл бұрын

    Can you do a vid like this for doubles I got pin trucks I’m having issues with speed wobbles

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    those type of trucks are for carving, not going fast. They will wobble

  • @thevelveteenking4440
    @thevelveteenking44403 жыл бұрын

    Great vid! 🤘🏿👽🤘🏿

  • @amirghazalen803
    @amirghazalen8033 жыл бұрын

    When the speed starts to get higher the longboard starts to shake, so this is not really my fault that I'm not balanced or somthing? And I should stable my longboard? (And be very careful while riding, this costed me a broken thigh) And thank you very much for the useful video🌻

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    It's kinda your fault too. If you have a lot of skill you can go faster safer. But alsoz the equipment matters

  • @marwaismael6362
    @marwaismael63622 жыл бұрын

    i have tightened my trucks and still gives wobbles the wheels were turning left and right eventually i crashed the road so badly how do i know what type of bushings i have in my board?

  • @downhill254skate

    @downhill254skate

    2 жыл бұрын

    Depends if TKP or RKP, you gotta look online at bushings for your name brand trucks.

  • @RonaldJayBuayan
    @RonaldJayBuayan4 жыл бұрын

    does truck length contribute to speed wobble? i have an 8x28" deck which is an electric skateboard.. current truck size is 10.5" axle and i am planning to upgrade the trucks to paris v3 but i just can't decide if i should get 180mm or 165mm.. what do you recon? i want to have stability and nimble carving

  • @AroniDeliquint

    @AroniDeliquint

    4 жыл бұрын

    Yeah, a bigger wheelbase is generally more stable. That deck would give you wobbles as you get up past 30mph. Wouldn't recommend it for speeds faster than 20mph. 165mm or 150mm even, would fit better on the 8inch width.

  • @downhill254skate

    @downhill254skate

    4 жыл бұрын

    @@AroniDeliquint What busgy said is correct

  • @RonaldJayBuayan

    @RonaldJayBuayan

    4 жыл бұрын

    @@AroniDeliquint thanks for the info dude,, last question, can i use multiple shock pads? like i can only find 1/6" shock pads and i am wondering if i can buy 4 and place one on top of another so it would be 1/4 inch

  • @DjedjeMuimpe
    @DjedjeMuimpe6 ай бұрын

    And eye want to know what's that supposed to mean

  • @AnthonyMonaghan
    @AnthonyMonaghan4 жыл бұрын

    Nice...thanks.

  • @downhill254skate

    @downhill254skate

    4 жыл бұрын

    Most welcome

  • @markleicester1
    @markleicester13 жыл бұрын

    I'm not going to give this a down thumbs but the main way to stop speed wobbles is keep 90%+ of your weight over the front truck, I run short Esk8 , keep my trucks super loose and can run at 25mph no speed wobbles at all

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    The main way is skill actually. 25mph isn't that fast

  • @zzllkiss
    @zzllkiss Жыл бұрын

    👍👍👍

  • @mixie.darling
    @mixie.darling2 жыл бұрын

    2:15 sir? 🤨

  • @Texas_Cody
    @Texas_Cody4 жыл бұрын

    This video is hard facts.

  • @downhill254skate

    @downhill254skate

    4 жыл бұрын

    Thanks for watching bro!

  • @Bryan_Mutai
    @Bryan_Mutai5 жыл бұрын

    noice

  • @downhill254skate

    @downhill254skate

    5 жыл бұрын

    Bless

  • @Dalziel45
    @Dalziel45 Жыл бұрын

    Good tips but man, the audio is godawful

  • @justinward253
    @justinward2533 жыл бұрын

    Bombed a hill on my skateboard with loose trucks and broke my collarbone not gonna happen again😂idk why I didn't use my longboard first my dumb self used my skateboard with 52mm wheels rather than my longboard with 80mm wheels

  • @downhill254skate

    @downhill254skate

    3 жыл бұрын

    Yeah man, longboards are better suited to speed :)

  • @justinward253

    @justinward253

    3 жыл бұрын

    @@downhill254skate I have a landyachtz evo 36 with 180 trucks never really bombed with it yet

  • @Applesgosh
    @Applesgosh3 жыл бұрын

    oWo