HoopTech Gen2 Larger Field Embroidery Hat Hoop with T-BAR Tensioning Arm
Introducing the Hoop Tech "Dream Frame" Cap/Hat Hooping Frame!
Cap Frame for 6 Needle Machines: www.allbrands.com/products/41056
Cap Frame for 10 Needle Machines: www.allbrands.com/products/41057
T-BAR Tensioning Gauge: www.allbrands.com/products/41058
Allbrands.com’s Barbara Chatelain and John Douthat meet with HoopTech representatives Justin Stewart and Clayton Calvert to learn more about how the HoopTech can enhance the Brother and Babylock multi-needle machines’ cap frame ability. HoopTech’s Gen2 Cap Frame makes it easier and also expands the embroidery area to bring your embroidery profession to the next level.
HoopTech is proudly manufactured, owned, and operated in Cincinnati, Ohio, and is second-generation family owned and operated by Clayton Calvert and his wife, Amy.
Product Information:
This is the next generation of EMS style cap frames. It was specially designed with the larger field embroidery machines in mind like Brother and Babylock.
Important Notes:
The Dream T-Bar Gauge clamp is required to use this Cap Frame.
Can be used with existing Brother/Babylock Driver. but it is recommended that you use the Dream T-Bar Gauge for optimum results.
There is a metal cap that covers the machine's hoop sensor which tells the machine a Cap Frame is attached. For each sew out press the layout icon for trial run to ensure the needle will not hit the hoop while sewing.
Пікірлер: 21
Is there a T Bar for Ricoma MT 1501?
I would like to purchase an over ride clip for my gen 2 hoop tech, I have a Ricoma MT 1501, how can I place an order?
Hi. I bought my PR1000e 4 years ago and just discovered it didn't come with the override clip. Where can I purchase one? Thanks!
@DJStrikeItUp
4 жыл бұрын
The override clip doesnt come with the machine. You have to but it from Hooptech. They sell it along with the hat frame.
it looks like that attachment can connect on a janome mb4s too...
@Mypromisethetruth
3 жыл бұрын
Let me know if I can someone how fit this on a janome mb4s hook up looks very similar...
@allbrands1976
3 жыл бұрын
Currently we only list the Gen2 for the Brother PR machines. Please call us to see if we could order that for you at 866-255-2726, if if that item is being made.
What cap driver do you use with the pr655 and hoop tech frame?
@allbrands1976
3 жыл бұрын
Hi Jeana, Here is the link for that: www.allbrands.com/products/96032-hooptech-599733-gen2-solution-hat-hoop-dream-frame
@jeanawhaley5299
3 жыл бұрын
Thank you! I have purchased this and the problem I am having is my bobbin is showing on the cap. Not on any other hoops just the cap frame. Any solutions?
Will this work with the SWF /A-T1201?
@allbrands1976
3 жыл бұрын
The Gen 2 will work on the SWF as well, they just need to purchase the SWF version when you purchase it.
I was told the design had to stitch from the center out. Is that true?
@allbrands1976
Жыл бұрын
When hat specific designs are digitized, they are designed to embroider center out. Other digitized designs can work, but best results are with designs that move center out. Let us know if you have any questions. Have a wonderful day!
will this work on the Brother PRS-100 Persona?
@allbrands1976
3 жыл бұрын
I believe so since the Persona takes the same hat hoop as the PR6. I will ask., and get back to you.
@half_r_mk5
3 жыл бұрын
@@allbrands1976 thank you. I tried contacting them but no reply. Would be great to hear if they do have this for the PRS100. let me know please. Thanks. 🙏🙏🙏
@allbrands1976
3 жыл бұрын
@@half_r_mk5 We got a response: As long as the customers have the cap driver for their PRS100, the Gen 2 Cap Frame will work with it! - Justin Stewart HoopTech Products
@half_r_mk5
3 жыл бұрын
@@allbrands1976 thank you for this. So when I purchase the Gen2 hooptech, it will come with everything including the ovverride for the sensor?
@half_r_mk5
3 жыл бұрын
@@allbrands1976 I think I got it. I have to purchase the 6 needle cap frame, which will come with the override clip, and also purchase the tensioner gauge. In this case because the PRS100 uses the PRCF3 advance cap frame it's the same as the 6 needle cap frame.