Great instructional video!! Thorough tear down and removal. Thorough build up and installation!! Thankyou!

Please make more videos on this bike

Good video! Thanks for posting

Félicitations pour cette vidéo !

ty very interesting (and well made) video. i want learn more but u up only this one :)

thanks for video. manual says first remove subframe so I was thinking that was weird.

you didn't check your float height before putting back together

Great video. I do have a question. On my carb there are two small copper or brass tubes on the intake side of the carb body (very bottom of your video at 4:06) that are clogged with dry crusty debris that I am so far unable to clear. Are they critical to the proper function of the carb and what do they do? Thanks

All directional references are from the position of sitting on the motorcycle in a riding position: - on the right side of the carburetor are two small black drain hose that are taped, banded together. Mine were very cracked, torn so I replaced them with some bulk hose. I'm curious if there is a particular place that the go?

Why didn’t you inspect the plunger ??

nice manual

What about the diaphragm?

i want to know the size of the original main jet and slow jet

@alexandrostsakris3647

2 жыл бұрын

'96 and 97' models are either 62\162 or 60\158 and jet needle on 3rd and 2nd groove from top respectively. 98' through '04 are 52\142 and jet needle on 3rd groove from top.

my throttle doesnt go all the way back..having that kind of space at the begining I must twist it back with my hand whats the problem?

@aloopoffroad2222

3 жыл бұрын

It's super important that your throttle returns properly; the entire system needs to be inspected in order to diagnose this issue. We'd recommend starting with the throttle pipe (aka tube) to make sure that there's no dirt, debris, or crash damage between the pipe and the handlebar - even the right side bark buster can interfere with this. If that looks good, check that the cables are properly lubed and functioning correctly (if you have any question about it, just replace them - these are fairly cheap and easily replaceable. Same for the throttle pipe!). From there, go into the carburetor to inspect that the springs, slide, and everything else is installed correctly and in good working order. If you get through all of those steps and are still having issues, contact your local dealer or a qualified, competent mechanic - you do NOT want to mess around with a stuck or sticking throttle!

@oh-qn6ht

3 жыл бұрын

I just experienced this problem on a xr250. turned out the cables were way too tight on both ends at the carb. loosened them up as they need a smidge of dead play and all is good. Ive also experienced a worn out sticky cable on another bike. As well as a broken throttle tube that was allowing the rubber grip to drag and catch on the handlebars.