Thanks for making the video. Have 1987 Xr600r. Was running into some of these issues. Figured them out myself but it is great to have your video for reference. Truly appreciated. We can all learn something new everyday by us all sharing. Thanks again.

I bought a 1985 XR600 and it was always a pig to start for the first time. I put up with it for years. Then recently it refused to start. Tracked it down to low speed fuel circuit. I watched your video and it was very helpful. A previous owner had swapped the carb bowls over and the secondary float was way off. Now it starts very easily Thanks for your video

Love to see a vid of you installing the rebuild kit

Awesome tips tricks, and great knowledge thank you for the up load! This is perfect

I had the same problem after rebuilding my 87 xr600r carb, lone behold i swapped the bowls. Thanks for this video!

@williamgannon6132

2 жыл бұрын

Swapped the bowls like just moving them to the opposite carb ?

Thank you for sharing the info.

Hey man appreciate the video. I have a 84 xl 600 dual carb. If I took the washers out that was under the needle as it’s non adjustable needlewould it run super lean? Can’t keep it running idles high no matter what change adjustment wise.

Thank you for the video, I have a problem with my xl600 carbs, the main carb does not fill with petrol when I open the tap. The second carb does fill. If I open the drain screw on the first carb no petrol flows through the drain but it does flow through the second carb. Any idea what could it be? The bike doesn't start and I would like to avoid having to take the carbs off the bike. Please help

Do both carbs have a 45 pilot jet? I just took mine apart and the right side carb does not have a pilot jet in it??

Thank you for the great video. I have a question. I have problems with my XL 350 from 1984. My dual carb does not have the bottom cup with the hole that you mentioned. They’re both identical even have the same part number on them. is that wrong? Also, I don’t think this is a 350 carb but looks like a 250 based on parts that I saw for the rebuild kit. Sorry for the complicated question.

@freiheitoscar7428

3 ай бұрын

hey, yes the xl350 bowl does not have the Hole and yes the xl600 kit fits for my xl350 to

I'm looking for a set of carbs for a 86 xr600r

Where u get the rebuild kit from, can u post the link, i found a website that has them but they want alot for it, please if u can post the link

@509FUN

2 жыл бұрын

We’ll do you want quality parts? Or??????

👍