Honda Ruckus TVR Intake Install
Автокөліктер мен көлік құралдары
In Today's video we install a TVR velocity stack intake from The Ruck Shop. We run into some issues along the way, but show you what to do to avoid them when you go to install your own.
Пікірлер: 37
Instantly subbed cuz you own a ruckus ✌️
well done homie looks great
🇩🇴🇩🇴🇩🇴Hello from the Dominican Repúblic nice to see you
really awesome ! love u wes!
subcrd total for youuuuu, hope to be the first to watch your video is a pride for me, very good, hopefully always healthy
Just put the same intake on my ruck and wow its soo much louder now , i also have a yoshimura pipe coming soon and already im kinda questioning the noise level lol
Use a JIS screwdriver to unscrew your screws and avoid striping one or more. JIS (Japanese Industrial Standard), all of the screws that people think are Phillips screws are JIS screws. JIS screws don’t strip like a Phillips does when using a JIS screwdriver.
What did you do with the stock holes
what did that tiny washer have to do with putting it on the needle? if it did t have one in the first place?
great job!
@danielwalsh9661
3 жыл бұрын
It is my understanding (per you) to only install the 85 main jet if you keep stock exhaust?
@Theruckshop
3 жыл бұрын
@@danielwalsh9661 yes thats if you have a different airbox kit not the tvr.
@danielwalsh9661
3 жыл бұрын
The Ruck Shop Thank you as I’m looking to install this kit and keep the stock exhaust for the time being . I’ll re jet and add the shim .
@Gmj2002
3 жыл бұрын
Do you have to do anything with the open end on the vacuum fuel pump or do you just leave it?
I have got same one notice mid run rough can you help me
If you have any bogging or hesitation issues...shoot me a comment back. I can give you some tricks to get it dialed in perfectly. I had some problems with that intake set up. Jetting may not be correct also since you don’t have an exhaust yet. All that depends on where you live and sea level in your area.
@wesgibson1185
4 жыл бұрын
thanks man, no bogging issues luckily, but I definitely need to tune the jets, I can feel it isn't quite right! I'll be posting a test ride video next weekend 👍
@WideOpenThrottle
4 жыл бұрын
Thanks for the sub back appreciate it. If need be comment back and you can hit me up on facebook
@AlasTVRisHere
4 жыл бұрын
@@wesgibson1185 cut the intake rubber hose down so that the total length of the intake (from carb opening to velocity stack opening) is exactly 8". You should get some low/mid throttle breakup if it is set correctly. This breakup signifies that you will not be piss rich at WOT higher in the rpm like 99% of other intakes on the market. You'll see 11.5 ish if setup as mentioned...near sea level. You also need an exhaust to run this. Do not change the jets.
@gizzabem
2 жыл бұрын
I might need some advice lol 😂
Can you please tell me there’s one hole that goes to left side
Does breather come with it
oh shit I literally just installed the same seat frame and similar cover from cheeky seats. that carb screw is a big oof. may do what you did and swap mine out too.
@wesgibson1185
4 жыл бұрын
I HIGHLY recommend it! will save you in the future for sure.
What’s the name of the song you had playing
Awesome video. One question, please. I've heard you should do the intake only at the same time you do a new exhaust. Is this true or can I run the stock muffler with these modifications (jetting carb and intake install)?
@mechamoto6102
3 жыл бұрын
Better to do both so you only have to jet once
@danielwalsh9661
3 жыл бұрын
Yes you can install the TVR intake without an exhaust . I just received mine yesterday and installed . TRS suggested I use the 38 main and shim the needle . I did so and performance wasn’t quite up to my pre install . So I installed the 78 and I’ve slightly increased my top speed and low end is substantially better . By slightly adjusting the stack in and out , 1/8 in. or less you will find the sweet spot . This intake is loud and sounds like you’ve added an exhaust . And if you’re planning on keeping the rear fender you will need to purchase or fabricate a support . I have not found any info on removing the PCV valve so it’s still hooked up , would I recommend installing the TVR intake ? Yes Definitely .
What size jets
the double finger guns you always do at the start is so "dude making a vlog"
If I swap out the exhaust do I need to swap out the air intake to aftermarket as well? I just bought a new Ruckus so I'm new to all this?
@ruckusreject2440
4 жыл бұрын
IMO YES get an new air intake. The exhaust is worthless with out extra air coming in. In fact you might even losing performance do the the lack of back pressure because of the exhaust.
I install carburetor filter every jet carburetor it was Bogged out
You could have used vice grips to turn that screw.
Does that velocity stack have a filter in it ?
@doubledogdrone
8 ай бұрын
No filter. I just installed this kit.
I love these videos where they do these modifications, then never even start the motor when your done. Did your mod fail?