14:06 the whole 'half of a fit/jazz engine' is BS true that the honda car engineering side had input into the engine design of the NC but that's it 👌🏻

8:04 might be an idea to fit some fork leg guards to protect the chrome leg 😊

I never have issues with K&n filter with 60,000 mile on my 2012 Honda NC700. i never over tight it, but sometime i see the gasket from the old filter stock in the engine so I double check for it. Good tip for fork dust cover i usually use wax to clean the tube.

@gripsanity

4 жыл бұрын

Thanks for the comment! Tons of people use K&N filters without issues. Even a small chance of any issue like that on a motorcycle could be catastrophic. In my opinion its not worth the risk so i use OEM now. Also i think it says a lot that racing organizations have banned them and require OEM.

Thanks for the video and the tips.. just picked up a 2013 and sure enough...K&N filter WAY TOO tight.

Your so much better of an oil changer than the last owner.

13:02 on the rear shock the whole dog bone assembly should be stripped once a year and cleaned and greased 👍🏻

I have the exact same bike and had the exact same kn oil filter I'm pretty sure the past knucklehead owner of the bike put it on with a high torque impact wrench oil filter wrench couldn't budge it at all eventually I said f it and drilled a hole through the entire filter stuck a long Screwdriver through it and was able to get it off I kept the holy kn filter as a trophy that is on display in my garage. I feel your frustration. Great video as well

Dude you are a G. Thank you!

great video!do you have a video about draining and refilling the coolant?i will attempt this maintenance job soon and i'm unsure about doing it.

Concise. Thank you.

@gripsanity

4 жыл бұрын

You're Welcome, thanks for the comment!

This drain bolt goes with magnet from manufacturer?

Could you show how you attach you saddle bags in a video

Great vid, thanks for making it. The log on your phone is a good tip 👌🏼

카메라가 고정이다. ㅋㅋㅋㅋ 정비하는 장소를 포커스잡고 찍었으면 좋았을텐데.. 아쉽다

What grease are you using on the forks? Mine are leaking and needing cleaning.

@gripsanity

2 жыл бұрын

If they're leaking then you'll probably need new seals. The grease is just to reduce stiction. Any grease will do.

Good job!

Something is wrong with your video. I've tried to watch it. But it stops at 1:14 seconds on the dot, everytime.

@gripsanity

4 жыл бұрын

Weird wasn't working for me earlier either. Now it seems to be working. Let me know!

@plamenpanayotov3290

3 жыл бұрын

@@gripsanity stops on 1:17