Check out our Amazon Wish list www.amazon.com/hz/wishlist/ls/3CJ6B6826ZUY7?ref_=wl_share

Great video T-Bone. Your camera person is always right. The other words you need to remember is " honey i cant believe i made that mistake again". It won't happen again! Lol 👍🇺🇸😎Roger

No smoking and you got rid of that loud tapping noise! Well done buddy 👍🏻

Hello there T Bone, i've been watching your videos for a couple of months now, awesome. I watch you and Taryl all the time now. I'm retired and tinker with small engines and help out neighbors and friendds when i can. Your vidoes have helped alot, keep them coming.

@RaleysSmallEngines

Жыл бұрын

That's great, thank you!

You should have said, "Fourth time's a charm". Great job!

@RaleysSmallEngines

Жыл бұрын

😆 thank you for watching and commenting my friend

U both are some good southern people. When you find a good man it is because of a great woman.

Yeps a picture says 1000 words and save me every time ✔️💯💪🏽

The song literally genius.... AIN'T IT JUST AIN'T IT 😜 lols... thanks

great job i will,watch that 5 more times to learn everything thank you

@RaleysSmallEngines

7 ай бұрын

Thanks my friend!! Glad you liked it

Thanks for the great informative video

@RaleysSmallEngines

2 жыл бұрын

Thanks my friend.

Great Job T bone. Thanks Mrs T Bone for filming wonderful job as always

T-Bone! that my friend was an absolute pleasure to watch and listen to. What an absolutely amazing mechanic you are, others make it boring, over narrated and sounding difficult, but you my friend make it fun. All your one liners and sayings had me and my mate in stitches 🤣🤣 When that retaining clip went ping I was laughing and I knew Mrs T would eyeball it through space and if she wasn’t filming could have probably caught it and shouted “Howzat!” absolutely loved shop Cat getting in the video. Totally addicted to your channel brother 👍🏻👍🏻

@RaleysSmallEngines

2 жыл бұрын

Thanks so much my friend. It would have taken me hours to find that clip, Mrs T saves the day

Very nice and educational video Mr and Mrs T-Bone, looks like everything went smoothly. 👍

I did learn another few things from this video, so thanks to you AND the folks that commented. I learned a couple new ways to lap valves in, either just with a piece of fuel line by hand or chucking the fuel line into my drill. Great stuff! Also gonna try the viewer tip on using a feeler gauge .003 over before tightening the locknut. That’s the first time I’ve ever heard anyone explain why the adjustment changes as the locknut is tightened. Now that I think about it, the threads having .003 play makes perfect sense!

Sir, another useful, and informative video. I have worked on a lot of automobile engines, doing complete rebuilds. I have found I lawn mower engines are so much more fun, and much lighter. That makes them more fun. Have a wonderful day To you and your wife, you make a great video team !😊

@RaleysSmallEngines

5 ай бұрын

Thank you

T-Bone, you were a bit rough manhandling that engine down into place! I’m guessing you were getting hangry by that time. 😂🔧👍

@RaleysSmallEngines

Жыл бұрын

Lol, I don't get angry. It just took a little persuasion LOL

That.looks like fun but it is in the right place for the fixing the smoke issue

Great video t bone. Really appreciate the in depth rebuild. I’ve messed with some clone 212 and smaller Hondas. Good to know about the counter balance. Hope things are good your way brother.

@RaleysSmallEngines

2 жыл бұрын

Thank you. Things are going great here, hope ya'll are also.

I love the way u work and talk u r the best. I am learning a lot. Keep it up. I work the same way.

Great video. Thanks for taking the time.

@RaleysSmallEngines

2 жыл бұрын

Thanks for watching!

it is such a pleasure and helpful, to watch a Master at work! You sweat confidence and experience, while taking the task at hand with humor and appropriate importance. Thank you. It's very encouraging to those of us that dream of having your abilities.

@RaleysSmallEngines

2 жыл бұрын

Wow, I'm speechless. Thank you very much for such kind words my friend.

@robertromero4836

3 ай бұрын

​@@RaleysSmallEngines❤😂😂😅😅😅😅😅😅😅😅😅😅😅😅

@robertromero4836

3 ай бұрын

R Robert😅😅😅😅😅😅😅😅😅😅❤❤😊😊😊😊😊😊😊😅😅😅😅❤

@robertromero4836

3 ай бұрын

55:43 55:43

@robertromero4836

3 ай бұрын

🎉😅😅😅😅😅😅😂😂😂😂😂😂😂😂😂😂😅😅😅😅😅❤❤❤

Good job on the videos. Trying to get pointers from you to see what the viewers want.

Good video T-Bone. It runs like new again

Great video

@RaleysSmallEngines

2 жыл бұрын

Glad you enjoyed it

You have taught me a lot, thank you for your videos.

Nice job Raley !

T bone thanks for your lessons....Greetings from Holland

@RaleysSmallEngines

2 жыл бұрын

Wow!! Thanks for watching my friend

Hey man great video you do a good job on your videos you get to the point and no bull shiting around ,and what's so funny there's a lot of stuff you say that I say as well I told the Ole lady the other day , check this dude out , who's that sound like?. We,,😂 LOAO , SO , WE are full blooded country , And that's what I'm talking about I hope y'all have a good one you and your lady and everyone else that watches your videos take care of yourself have a good one.

@RaleysSmallEngines

2 жыл бұрын

Love it my friend thanks for watching

Enjoy your videos

Great video t-bone 👍

Excellent and Thanks.

How amount a video on getting the clutch off the output shaft. Or some good ideas to get clutch off. Thanks very much.

Theses engine are very popular on large blowers and they never change oil or air filter Rod thru block is common

That ring gap would cause the smoking for sure

Thank you sir!!!

Awsome

Kitty wanted a wrench 🐱 Good thing the boss was around that clip could have gone anywhere holy crap !

@RaleysSmallEngines

2 жыл бұрын

Lol. I would have never found it.

Enjoyed it,I ran out of popcorn though!

@RaleysSmallEngines

2 жыл бұрын

Lol Glad you liked it.

@JohnSmith-yn8pl

Жыл бұрын

Use gum out to loosen the coating of the nasty places, then power wash lightly. Take the recoil first.

Do you ever pressure wash engine first ???

Can’t believe you not using seal puller and fighting it out

Where do you get rings from? Thanks for the video , really helpful

@RaleysSmallEngines

Жыл бұрын

We get them from Honda

I’m shocked at the amount of carbon from our cheap fuel Even breaking top of pistons top to ring area

broke carb mount

carburetor intake

Like my dead friend used to say if you cant find something call Ann. Thats my wife

U got that right. Yes. Dear. I am a good old southern boy. A good woman makes a good married married

Hey man my cylinder head has a gouge in the middle why?

Would the new piston with a longer skirt make for a more quiet running sound? Also where did you purchase the new piston?

@RaleysSmallEngines

Жыл бұрын

We are a Rotary Dealer, that's where we get 90% of our parts. I'm sure that's where I got it from. Sorry, I have no idea if a longer skirt will make it quieter. We stick to OEM or Rotary as close as possible to oem.

@philliphall5198

Жыл бұрын

I’ve AllWAYS replaced piston and rod 90% of the time and have never had a problem OEM parts are the best parts Some major brands are very good also and have used a lot of Rotary parts

@JohnSmith-yn8pl

Жыл бұрын

How do I get the flywheel off? Does it have left hand threads? My impact air gun will not budge it. Thanks very much.

If I got to replace the torque converter on my UTV, what brands will fit ? Thanks very much.

@RaleysSmallEngines

Жыл бұрын

I really wish I had a good answer for you. So sorry I don't know and definitely don't want to give you incorrect information.

@JohnSmith-yn8pl

Жыл бұрын

Thanks for the reply. Take Care

Your wondering why you had to adjust your rockers so many times. The big nut threads have about 3 thousands clearance. So you can either add 3 thou before tightening or back the big nut off a quarter turn then tighten the lock nut down. You should be very close.

Does it have a steel sleeve

@philliphall5198

Жыл бұрын

I know it does but got to comment 😊

I've got 52 years with the wife, there has been many yrs of yes dear. What can I do to help.

@RaleysSmallEngines

Жыл бұрын

😆 Mrs T and I are soul mates and get along perfectly

T-bone what do you think caused the damage

@RaleysSmallEngines

Жыл бұрын

It's from the customer not changing the oil and running it low on oil

@davideggins6538

Жыл бұрын

That’s what I thought to but I can’t fathom. Why you would even check the oil 🤔I’ve run my oil way to long to but it gets looked after really close until I can change it

@philliphall5198

Жыл бұрын

I love over hauling the GX Honda engines Can’t beat them

Where is a great tutorial about how thing rings go on?....maybe its my eyes..how many rings are there on this engine?

Dish washer 😂😮

You need to be schooled on valve adjustment.

400 cc and only 11hp ? very poor motor tbh

37 seconds in-time to unsubscribe!

Check proper ring gap. This guy does not know about that I guess. LOL

No thanks. A lot of bad stuff happening here.