Thought I would take the time and thank you on behalf of my 93 Del sole and myself your video saved me from alot of hair pulling

THANK YOU SO MUCH! This made my life so much easier today. Got that part number from my local Autozone. Went home and BLAM it popped right in!

@OldSols

Жыл бұрын

Boom! Yesss!!!

Thanks. Just what I needed!

THANK YOU!!!! 97 VTEC owner here. Had it happen today. I really appreciate you taking the time to put this out there.

@OldSols

3 жыл бұрын

Yes sir! Glad it helped!

Bro you save me a lot of money with this video I appreciate it I was planning on re-wiring job because I couldn’t figure out why my lights go off thank you

@OldSols

4 жыл бұрын

Toney Millner ayyyeeee that is fantastic! Glad this worked for you!

Great video. Quick an straight to the point. Also didn’t have to get ripped by some mechanic who said it’s gonna take an hour an 50 bucks. Went to advanced auto myself got the grommet watched your video an boom back to normal. Thanks for posting

@OldSols

2 жыл бұрын

Boom and BOOM - awesome 👌

Again thank you 7.00

Your a legend

Very useful. I literally just had this happen to me at work. Im installing it tomorrow when it comes in mail. Thanks!!

Thank you for this video, these can save one quite some money.

Buying that part soon. Exactly what happened to my ‘97

Solo traveling female THANKS YOU kind Sr.💗💐

@OldSols

2 жыл бұрын

Awesome 👌 ... safe travels

Perfect, thank you!

Wow, got to place I was going and saw lights weren't going out and went right back home and pulled fuse as couldn't get them to go out... did notice a piece of plastic on floor as you note and couldn't figure out what if anything it was to. Thank you!

Good stuff fam

Bro, you just saved my ass, thx a lot!!

@OldSols

2 жыл бұрын

Yeahhhh buddy! Got you got it fixed!

My hero

Great job, I was able fix my brake paddle pad only $10. Thanks

@milori21

2 жыл бұрын

My car was a acura rxs 2002

@OldSols

2 жыл бұрын

Awesome 👌

So I just bought a 93 Del Sol and it had the brake warning light ON. The first thing I did was to put in some brake fluid and that made the warning light go away. Two days later, it turned back ON. I checked everywhere and there weren't any leaks and the brake fluid was still at a good level. What do you think is keeping my brake warning light ON? Does it have anything to do with the cap or the sensor beneath? Help me out, thanks!

You Sir are an excellent helper ! Thanks for sharing with us

Very helpful! Thank you

@OldSols

5 жыл бұрын

Yes! anytime!

The black rubber piece is easier to get in, but what I found was that after a couple of days the switch had made such an indentation in the rubber that it was able to fully extend even with the pedal up. I am going to use the plastic piece instead but it is so difficult to get in there.

@enzor9380

Жыл бұрын

U get it in? Woulda said to use some lube. Lol. Jk Jk.

Fix my problem for my integra!

Only the black piece fitted right when I bought it and it stayed on I first installed the white piece but it kept falling off as I drove , I’d find it on the floor.

If you wanna save some money, get a few pennies and jb well it in place. CB7 and Del Sol cost me about 5 cents. Learned on my CB7 then replaced that with a free Del Sol and the same problem happened. I'm all about saving money. p.s. you never have to fix it again. I'm all about that also.

When I used the rubber black one, it worked for about a week and then the problem came back (brake lights appear on, with car off) . The black rubber piece becomes warped or bent in a depressed fashion, and stops pressing the brake light button after a while. I'm guessing it got too heated

@miriammiriamxoxo

5 жыл бұрын

I was wondering about that, it's too soft, it wears out I would assume. Did you use the other piece instead? Or maybe it would be a good idea to reinforce the black piece by gluing a penny on top of it or such

@trooperj9152

3 жыл бұрын

Was wondering that also... couldn't get the plastic one in but the rubber one went in easy. may try to take a bit of the tip off the plastic one so it'll fit.

@Blu1189

3 жыл бұрын

Currently replacing the rubber one with the hard plastic one because it's stopped working

I just had to do my clutch switches and never again. I ended up super gluing a dime as a stopper so I'd never need to do it again

Please adjust your handbrake. I don't think even snoop dogg is as high as that handle. Good tutorial video man.

@OldSols

7 жыл бұрын

hahaha uhhhhh nice notice there 007! I'm sure they tension on that hand-brake isn't what it used to be! Thanks for viewing the video. Appreciate it.

Great Simple Install w no Tools necessary

@OldSols

2 жыл бұрын

👍🏼

Please can someone tell me what exact the name of this i cant find online..thanks

@oserratos

4 жыл бұрын

It's called pedal bushing and pedal stop assortment.. part 74015. They sell them at your local O'Reilly's. That's where I just got mine. Good luck

You're a fucking G dude

@OldSols

Жыл бұрын

Bang bang bang 👌

@OldSols

Жыл бұрын

Yeah yeah!

@TontoBongRonto

Жыл бұрын

@@OldSols I would have never figured that out and showed me the part I need in a nice presentation. Cant beat that.

Used it on a 2001 Crv we shall see what happens with plastic piece

@OldSols

5 жыл бұрын

Let us know if it works - and we can add to the description if it works or not!

@hectorortiz1852

5 жыл бұрын

It works just have to align it and it won’t fall off

This is exactly what I need for my 95 Sol. So, I'm a woman. I can do this right? Looks easy enough.

@OldSols

6 жыл бұрын

Vicki B. Vicki I am absolutely confident you can do this! It's about a 10 to 20 min job 👍🏻

@miriammiriamxoxo

5 жыл бұрын

You can because I just did : )

I have to do the same . and put a sd card holder reverse . for Hyundai sonata