Yep, it’s been on my list.

@WOODZMAN

Жыл бұрын

Definitely a good thing to have. One broken radiator and you will wish you would have bought one. Ask me how I know lol

Using one also, very well built and I feel better about riding in gravel and right side tip overs. I also installed their tail tidy, it is very well built also. Thanks for your review.

@WOODZMAN

Жыл бұрын

Your right, thanks for watchin Don

Looks like it’s built like a tank, and looks good also

@WOODZMAN

Жыл бұрын

No doubt, I have had a couple in other bikes but both nothing this good, CRFsOnly has a good deal on them to

Just installed one on my 300l I cut the top off my plastic factory one and put it back in place to keep the radiator cap covered

@WOODZMAN

Жыл бұрын

Awesome I thought about doubt that, I’ll have to give it a try

Looks good!

@WOODZMAN

Жыл бұрын

It’s a good investment

I installed one on my bike awhile back and it is well built and the brace really stiffens the mount up substantially. One bad mishap on the right side could get expensive. Good job bringing products that are very functional to your channel. I got my bike after you got yours and I quickly learned who to follow for information.

@WOODZMAN

Жыл бұрын

Thanks for watching Greg, I glad I can help.

Thought about doing that. Interested to see how airflow is changed. As far as you feeling it.

@WOODZMAN

Жыл бұрын

I rode it to town today and so far I can't tell a difference. It’s definitely well made for sure. The best one I have seen

@ozarkhillbilly1431

Жыл бұрын

@@WOODZMAN may have to get one.

@WOODZMAN

Жыл бұрын

Yea trust me, I crashed my CR250 once and it smashed the radiator in, dumped all my antifreeze out immediately and I was stranded. I wish I would have had one then

I don’t like that metal bracket; I’d rather make one out of PA6; also I’d say the radiator is obstructed - I’d choose sth like a frame on the outer perimeter without that obstructing grille

@WOODZMAN

7 ай бұрын

Agreed

Are you worried about heat with the reduced air flow? I heard that the 300s were running hotter than the 250s (I'm getting mine in the spring, going from 250 Rally to 300 Rally).

@WOODZMAN

Жыл бұрын

I haven't noticed a problem today and there are a lot of people who use them without any problems.

Any idea if this guard will impede install of the acerbis 3.5 gal tank? CRFOnly site says "may" not work with aftermarket tank.

@WOODZMAN

Жыл бұрын

I don’t know that for sure on the 300L. I had the guard on my 250L with the IMS tank and I had to modify the rear support bracket on the guard to make it work but it wasn’t a problem

This guard is designed for street use only obviously. The way the front grill is made, it collects all dirt from front wheel and even makes it hard to clean. What you need is side directed fins like the original plastic cover has. These catch the dirt and let it fall down while directing the air in. Also this guard is needlessly heavy. Thick plates should be replaced by thinner profiled shapes for the same strength at the half weight.

@WOODZMAN

5 ай бұрын

Well you say that but I have had this same guard on 3 bikes, rode in lots of mud and have had 0 issues. It’s not heavy at all. I wouldn’t do with out one

@aknmtbr

2 ай бұрын

@@WOODZMANthanks! I’ll like get one. I was wondering how much crash protection is really necessary. I have skid plate and wrap around zeta guards.

@WOODZMAN

2 ай бұрын

Basically it depends on the type of riding you do

@aknmtbr

2 ай бұрын

@@WOODZMANanywhere I can! Lol😂

@WOODZMAN

2 ай бұрын

If you ride in the woods, the radiator guard will keep a stick from going through the radiator, also is you fall over it can save your radiator

I'd put one on my 300L, if I had one

@WOODZMAN

Жыл бұрын

Haha it’s definitely worth getting one: CRFsOnly is the best place to pick one up. I put the link in the description