No video

Honda Civic Mods | JBL BassPro Nano Compact Powered Subwoofer

2006 2007 2008 2009 2010 2011 8th Gen Honda Civic - R18 SOHC I-Vtec - JBL BassPro Nano Compact Powered Subwoofer
Today, we are finishing my sound system upgrades by installing a JBL BassPro Nano Compact Powered Subwoofer on my 8th Generation Honda Civic. The sound quality of this subwoofer is absolutely amazing for such a small & compact sub! When paired with my Pioneer A-Series speakers and the Sony XAV-AX4000 head unit, I can definitely enjoy a higher class of sound quality.
If you want to check out the other sound system upgrades I've added to the Civic, make sure to check out the links below:
Sony XAV-AX4000 Stereo Head Unit:
• Adding Wireless Apple ...
Pioneer A-Series 6.5" 3-Way Coaxial Speakers:
• Installing Pioneer A-S...
Here is a list of links to all of the items installed in this video:
JBL BassPro Nano Compact Powered Subwoofer:
amzn.to/3B593rh
BOSS Audio Systems KIT-ZERO 10 Gauge Amplifier Wiring Installation Kit:
amzn.to/3nztKZD
Devinal RCA Splitter, RCA 1 Male to 2 Female Cable Adapter:
amzn.to/3LOzTsK
Nilight 540PCS Mixed Quick Disconnect Electrical Fittings Kit:
amzn.to/42yaQRw
Unfortunately, I can no longer find the specific floor mats that I currently have for my Honda Civic, So I've added a link to a comparable version from Ikon Motorsports
IKON MOTORSPORTS All-Weather Floor Mats
amzn.to/3pdad1g
--------------------------------------------------------------------------------------------------------------------
Make sure to subscribe if you would like to see more detailed modifications in the future, as I have a long list of parts that are currently waiting to be installed.
Also, here are some links to some of the tools that I use in my video (available on Amazon):
Milwaukee Shockwave Right Angle Adapter - 48-32-2390
amzn.to/3L0AiI6
HSS Cobalt Drill Bit Double End 1/8"
amzn.to/3N8QQQW
Neiko 20596B Auto Trim Panel Removal Tool Set with Soft Grip (5 Piece)
amzn.to/41JYhCa
Sunex 3/8" Drive Impact Socket Set - 3351
amzn.to/3tzRCua

Pocket Screwdriver (set of 10)
amzn.to/3cQltZq
Makita Impact Driver Kit - XDT131
amzn.to/39UZ9vE
Impact Grade Socket Adapter for Impact Drivers
amzn.to/3kVp3UR
3/8-Inch Drive Flex Head Long Ratchet
amzn.to/3FuezW3
--------------------------------------------------------------------------------------------------------------------
Equipment Used To Create KZread Content:
Canon EOS R Full-Frame Mirrorless Camera - amzn.to/2Oi9YQp
Canon Mount Adapter EF-EOS R - amzn.to/3rtI7LH
Canon EF-S 10-18mm F/4.5-5.6 IS STM Lens - amzn.to/2OuJv1T
Canon LP-E6N Batteries (2-pack) - amzn.to/2MYaWRg
Sony TOUGH SD Card (256GB - V60 - U3) - amzn.to/38ExwWX
Rode VideoMic Pro+ Microphone - amzn.to/38lBNhN
--------------------------------------------------------------------------------------------------------------------
Follow me on social media!
Instagram / levelupmechanics
Facebook / levelupmechanics
Music is from Epidemic Sound www.epidemicsound.com/referra...
--------------------------------------------------------------------------------------------------------------------
DISCLAIMER
Some of the links above are affiliate links, where I earn a small commission if you click on the link and purchase an item. You are not obligated to do so, but it does help fund these videos in hopes of bringing better content and value to you!
As an Amazon Associate, I earn from qualifying purchases.
--------------------------------------------------------------------------------------------------------------------
If I missed any important information in the video, make sure to leave a comment, and I will respond as soon as I can.
Thank you to everyone who has stopped by to watch my content and subscribe to my channel! I am looking forward to creating more content as the channel continues to grow. Please consider dropping a like if you enjoyed the content (or thought it might be useful) and HIT that subscribe button so I can continue this journey and invest more into this channel!
Thanks again, and I'll see you in the next video! Later!
--------------------------------------------------------------------------------------------------------------------
For sponsorship, product reviews, and collaboration, you can email me here:
levelupmechanics@gmail.com
Again, if you have any questions or comments, please leave them down below! Don't forget to like and subscribe if you want to see me continue to upgrade my Toyota Tacoma & Honda Civic in the future!
Thanks for watching!
#8thGenSociety #HondaCivic #R18 #LevelUpMechanics #jbl #Amazon #pioneer #sony #subwoofer

Пікірлер: 53

  • @jdl.1234
    @jdl.123411 ай бұрын

    Great install

  • @LevelUpMechanics

    @LevelUpMechanics

    11 ай бұрын

    Thanks 😁👍. All the wires are hidden, everything is very secure, and the sound quality is 10x better than the factory sound system. It's definitely a simple subwoofer upgrade, but it's definitely worth the price 😁.

  • @weltvonoben
    @weltvonoben9 ай бұрын

    Great Video was very helpful!

  • @LevelUpMechanics

    @LevelUpMechanics

    9 ай бұрын

    I'm happy to hear that the video was helpful 😁 👍. Thanks!

  • @blannkin32
    @blannkin32 Жыл бұрын

    It looks so clean! Makes me want to install it on my coupe lol. but I guess I will be installing a bigger one in the trunk but I'm going to wire it through the middle also. As always great videos man! So excited to see whats coming to the civic

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    Thanks! Hopefully your sub install will go smoothly 👍. The next video will be a rear drum-to-disc brake conversion (with lots of extra upgrade goodies - polyurethane bushings, stainless steel brake lines, extended wheel studs, etc). Video editing begins tonight 😁

  • @blannkin32

    @blannkin32

    Жыл бұрын

    @@LevelUpMechanics Great! just was thinking on doing a break upgrade like that to mine! I'm going to really enjoy this build

  • @tem4077
    @tem4077 Жыл бұрын

    Keep the R18 vids coming

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    Will do 😁👍

  • @josephshimandle9619
    @josephshimandle96192 ай бұрын

    Sounds great.

  • @LevelUpMechanics

    @LevelUpMechanics

    2 ай бұрын

    🤟😁

  • @JJBanuelos
    @JJBanuelos Жыл бұрын

    Bass Boost Adjustments just like by old Walkman, Nice!

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    🤣 just trying to keep it simple 👍

  • @coopercooperino4228
    @coopercooperino42288 ай бұрын

    Thanx for the wonderfull video, how did you get de thick wire into the engine conpartment i cant find a opening in my seat altea Xl!?😅

  • @LevelUpMechanics

    @LevelUpMechanics

    8 ай бұрын

    I routed the thick power wire from the battery and to the center of the firewall. At the center of the firewall, you will see an oem wire harness that goes through the firewall @ 6:45 in the video. I just poked a hole through the wire harness "boot / grommet" that runs through the firewall and fed my power wire into the cabin area. When poking a hole in the grommet, do so more towards the side so that you will not break / damage the oem wires running through that "boot / grommet". Be very mindful of the oem wires when poking the hole. It may be easier to access if you take off the cowl trim and the cowl plate. I hope this info helps! 😁

  • @Donnythelatemodeltech
    @Donnythelatemodeltech Жыл бұрын

    CLEAN install. Do you think it's slim enough to go under a truck seat?

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    A truck seat, yes 👍. A Honda Civic, no 😆. I've seen these installed under 4Runner & Tacoma seats, so I think it should fit nicely under a Tundra seat 😀.

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    Width 7-1/2" Height 3" Depth 10-1/4"

  • @annettegarcia2672

    @annettegarcia2672

    3 ай бұрын

    How about Hyundai Kona?

  • @LevelUpMechanics

    @LevelUpMechanics

    3 ай бұрын

    I'm not sure... you would have to take some measurements to see if it would fit under the seat. Here are the measurements for the subwoofer: Width 7-1/2" Height 3" Depth 10-1/4"

  • @K03sport
    @K03sport11 ай бұрын

    how does it actually sound? how would you describe the bass? muddy? punchy? smooth? seamless like it isn't there and blends in w/the factory speaker locations? how high do you have the gain setting?

  • @LevelUpMechanics

    @LevelUpMechanics

    11 ай бұрын

    It sounds really good to me. I would say that it sounds "smooth" and blends in really well with the factory speaker locations. My aftermarket speakers have really good mid-range & high-range tones, so the subwoofer really completes the overall sounds with the low-range performance. The subwoofer has manual adjustments on the backside for gain, bass boost, and low-pass filter settings so that you can dial in the sounds to your own personal preference.

  • @pointman84
    @pointman844 ай бұрын

    How did you connect the power wire from the battery to the harness on the amp?

  • @LevelUpMechanics

    @LevelUpMechanics

    4 ай бұрын

    So I purchased a BOSS Audio Systems KIT-ZERO 10 Gauge Amplifier Wiring Installation Kit on Amazon to run the power wire from the battery to the power wire harness that is included with the subwoofer. In order to connect the power wires together, I just crimped them together (and used some heat shrink tubing afterwards) using a butt spice crimp connector. I have links in the description section of this video for all of the items I used to put this together 😁👍.

  • @MontaneroPaisaMontanero
    @MontaneroPaisaMontanero4 ай бұрын

    Can you tell me how can we connect it to the mustang 2024 system? Do we also need that RCA connection? Thanks

  • @LevelUpMechanics

    @LevelUpMechanics

    4 ай бұрын

    Technically, there are two ways to get audio signal to the subwoofer; 1. If you have an RCA outlet on your head unit (like mine), you can use that.... 2. The subwoofer includes a wire harness that you can use to tap into the regular speaker wires to get an audio signal to the subwoofer. The 2nd option is definitely beneficial if you still have a stock sounds system in your vehicle. I hope this info helps! 😁

  • @MontaneroPaisaMontanero

    @MontaneroPaisaMontanero

    4 ай бұрын

    ​@@LevelUpMechanicsBrother, thank you so much. I do really appreciate it

  • @Greeneyedmaori
    @Greeneyedmaori8 ай бұрын

    Just one question with this setup brother why did you put the subwoofer in that location of all the other possible locations are you not concerned with people stepping on it if you had a full carload of people?

  • @LevelUpMechanics

    @LevelUpMechanics

    8 ай бұрын

    The location where I installed the subwoofer was just my personal preference 😁. Most people usually install the subwoofer underneath a front seat so that it can be "out of the way". However, 99.999% of the time, I am the only person who is ever in the car, so I really don't have to worry about any accidental damage. The backseat of my Honda Civic never sees any action (other than the occasional load of groceries) 🤣.

  • @Greeneyedmaori

    @Greeneyedmaori

    8 ай бұрын

    @LevelUpMechanics say no more bro haha clean setup by the way..

  • @LevelUpMechanics

    @LevelUpMechanics

    8 ай бұрын

    @Greeneyedmaori lol thanks! 😁👍

  • @triggrhungry4065
    @triggrhungry40657 ай бұрын

    could you post a sound test so i can compare it to my stock, i like this option cause my truck is always full.

  • @LevelUpMechanics

    @LevelUpMechanics

    7 ай бұрын

    I will see what I can do 😁👍. From personal experience, this subwoofer sounds really good. So good, in fact, I plan on purchasing 2 more and adding them to my Toyota Tacoma.

  • @triggrhungry4065

    @triggrhungry4065

    7 ай бұрын

    @@LevelUpMechanics i was also wondering how the position it is mounted is when u have passengers, im in Canada worried about salt and snow damaging the unit.

  • @LevelUpMechanics

    @LevelUpMechanics

    7 ай бұрын

    I rarely have passengers in my back seat, so that's why I put the subwoofer where I did... but you could also place the subwoofer under the driver / passenger front seat. It's small enough to where it could fit under either front seat. That might work better for your situation 😁👍

  • @TeeJee48
    @TeeJee48 Жыл бұрын

    Why split the RCA signal if it's a dedicated sub output?

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    So the back of my stereo receiver has one "sub out" RCA connector (output), and the subwoofer has 2 RCA connectors (left & right, input)... The "Y-Splitter" allows me to take that 1 signal from the receiver and turn it into 2 identical signals to go to the left & right RCA input connectors found on the subwoofer. This allows me to "fine tune" the sensitivity of the subwoofer. So far, I've had ZERO issues, and the subwoofer sounds amazing! A lot of people think that a Y-Splitter cuts the one signal in half (or "splits" the signal), which is not the case. Instead, the splitter "copies & pastes" the original signal into 2 completely identical original signals. So far, everything is working exactly how it's supposed to, and the sound quality from the compact sub is great! I know there is more than one way to wire up the subwoofer sound signals. This is just the way I chose to go. I hope this info helps! 😁

  • @TeeJee48

    @TeeJee48

    Жыл бұрын

    @@LevelUpMechanics I thought the 2 inputs on the subwoofer were intended for systems that didn't have a dedicated subwoofer output - doesn't the amp just merge the lines anyway? The end result is the same of course, I think the signal is just being duplicated by the splitter then merged by the amp. I think you'd get the same end result and save a bit of money not bothering with the splitter, though I'm new to this stuff so could be talking nonsense.

  • @LevelUpMechanics

    @LevelUpMechanics

    Жыл бұрын

    In the end, I think either way would work the same too. Worst case scenario, you could always try just 1 RCA cable and see what happens... it will probably save you $10-$15 😁.

  • @K03sport

    @K03sport

    11 ай бұрын

    ...the splitter separates the "+" and "-" signal from the single sub out rca. this is only a theory as I don't have a Sony hu and haven't dissected the "Y" harness...

  • @0nce1803
    @0nce18032 ай бұрын

    Do you encounter subwoofer pop when turning off the vehicle? I install basspro sl2 and it pop every time i turn the car off, wonder if that is normal 😢

  • @LevelUpMechanics

    @LevelUpMechanics

    2 ай бұрын

    I have not experienced this issue with the BassPro Nano. Everything is still operating normally with my setup. I'm not sure why yours is popping.

  • @kazukishah6595

    @kazukishah6595

    11 күн бұрын

    If you do the remote connection correctly it would not pop like that. Radio > dsp > amplifier and lastly sub wofer

  • @milindrev
    @milindrev9 ай бұрын

    Do you really need to split the sub out , can we not just plug the sub out straight to one of the line input?

  • @LevelUpMechanics

    @LevelUpMechanics

    9 ай бұрын

    It's definitely possible to "avoid" using a splitter and just plug into ONLY one of the line inputs, as you suggested. The splitter that I recommended may very well just be a bit of redundancy on my part.

  • @milindrev

    @milindrev

    9 ай бұрын

    @@LevelUpMechanics thank you for reply.

  • @LevelUpMechanics

    @LevelUpMechanics

    9 ай бұрын

    No problem 👍. Anytime 😁.

  • @Tevilem
    @TevilemАй бұрын

    Never route the power and signal cable next to each other. They are gonna interfere

  • @LevelUpMechanics

    @LevelUpMechanics

    Ай бұрын

    While I haven't experienced any interference issues to date, I believe you are correct. I appreciate the advice 😁👍. It's better to err on the side of caution, for sure.

  • @Tevilem

    @Tevilem

    Ай бұрын

    @@LevelUpMechanics it may be more important for normal amps that also power the speakers

  • @INDIANHOMEGARAGE
    @INDIANHOMEGARAGE8 ай бұрын

    Jbl cost bro

  • @LevelUpMechanics

    @LevelUpMechanics

    8 ай бұрын

    The links for everything used in the video are in the description section 😁👍

Келесі