I second this. Amsr is not for you. You've a great contagious personality and mood Homie Hektor let it shine. Kudos ✌
@NewzAndReviewz
3 жыл бұрын
I like the silence if he is naming parts on the screen that he is putting back on. Silence only works if the mechanic is already a pro or familiar with part names. Id like to know when using the hammer what are you looking to hit and why just looks like he was banging away. Then at the end looks like he bent someone in the middle before adding the tire lol and i dont know why makes me scared to try even though i saw it
@emptytomb4967
3 жыл бұрын
@@NewzAndReviewz he needed to get the ball joints out of the holes, since they're tight and/or seized (joints are tapered), and the hard metal is the best place to shock it loose (instead of directly hammering the joint). also, at the end, he's 'staking' the axle nut into the indentation in the axle, as the nut is pliable there, and the staked metal blocks it from rotating and coming loose.
@nolove4442
2 жыл бұрын
He was having a bad day that’s all.
@Foodie_8883 жыл бұрын
You make it look so easy! I am taking notes on all your video tutorials just in case I am able to tackle future similar tasks. I hate taking my car into the shop and never knowing they will take care or diagnose correctly or cheat and say they need to fix things that are not needed.
@rafaelmarin19633 жыл бұрын
For a minute there I thought I clicked on Fix It Angel. 😝 good format.
@deespasojevic3013
3 жыл бұрын
I thought that 2 man especially with the sky view
@vuhuynh702
3 жыл бұрын
hahahha! I thought the same
@cristinavargas4976
3 жыл бұрын
He even farted, like @fixitangel
@blueberrypie53413 жыл бұрын
wow - i'm from Montreal Canada and that Civic looks brand new ! One winter here and its done !
@dilanmedina25653 жыл бұрын
Those rotor screw are paid actors! They never come off that easy
@mrdinshaw11 ай бұрын
Nice content, smooth like butter. This is where you know someone is seasoned.
@DarknessSlayer33 жыл бұрын
This channel is awesome. Glad that i found it.
@Rein_Ciarfella3 жыл бұрын
Hektor, I totally get all your humor in your silencio performance. Great work! Must be really nice to work on a completely rust-free car. Those rotor screws just came right out! Amazing! 👍🔧🧰
@kastooMcFry3 жыл бұрын
That's what a two week old car looks like in the North East. Normally, for when that type of service is required, rust is holding everything together up here. Nice zen-like video, man -Thanks!
@salvadorgutierrezr59143 жыл бұрын
Era todo Hector, buen video
@johangarcia17773 жыл бұрын
11:45 pressure relief valve
@strikke323
Жыл бұрын
13:44 them valves were loaded with pressure 😎💪👏😤
@lancelotray
Жыл бұрын
you mean fart?
@OliMWorld
2 ай бұрын
lol
@Rein_Ciarfella3 жыл бұрын
Time to ALWAYS honk the horn before backing up! Your kid scared the bejeezus out of me walking around the running car! Then sit the whole family down and have a strong talk about never going behind a running car, ok? Thanks, bro. 👍❤️
@rustyshackleford1920
Жыл бұрын
I agree with you bro
@marcz94823 жыл бұрын
Always great to see the kids around, the next generation of mechanics
@hectorplascencia88903 жыл бұрын
Cool video. Keep up the great work homie...
@AF-ib8ec3 жыл бұрын
11:45 👍
@danielochoa831
3 жыл бұрын
😂😂😂😂
@luxuryacuraz3 жыл бұрын
Awesome Video
@randomugliness12383 жыл бұрын
wow all of those part underneath the car are very clean.
@melvingibson45253 жыл бұрын
I have never seen those rotor screws come out so easily. Wow
@robertoortiz4473 жыл бұрын
Truth b told I got really nervous when ur boy was behind the car n the car was still running,other than that perfect, gonna have to take u my tundra I have left front noises sway bar or links
@mikevelela81452 жыл бұрын
Buen video!!!
@NewzAndReviewz3 жыл бұрын
The big homie hect in the building
@davidjsouth2313 жыл бұрын
I had new struts put on my 2011 Ford Taurus. Still has some clunkiness to driving over rough rough.
@ABQSentinel3 жыл бұрын
That passenger tie rod end looked a little worn, and do you not torque fasteners on steering and suspension components?
@cjl_-kr7yk Жыл бұрын
i replaced my wheel bearings twice....mavis said they both were bad...im noticing that the difference is that im not torquing the last silver nut...is that really the reason why i keep hearing the humming noise after putting on TWO brand new ones? i bought the preassembled from amazon and the second one was from rockauto
@mrnice88x2 жыл бұрын
4:19 I learned this from an old guy, use 2 hammers and hit the at the same time on opposite ends. You're welcome.
@sebastiangalvan53773 жыл бұрын
What was wrong with the strut was it also making noise or did it have a leak do struts make noise when there wearing down?
@NewzAndReviewz3 жыл бұрын
Thanks for the fart man! Excellent editing and details i like it bro really opened my eyes. That fart 💨 sounded shitty though. I wish next time when u put the parts back on you say the name of the part or flash it in text on the screen for the rookies so we know what part we are messin with just helps n makes it easier but you the shit bro
@adammcbain88472 жыл бұрын
Do you know much about the power steering pump on these engines?
@rrrPaco4 ай бұрын
I just swapped my sway bar with new end links and tighten ever bolt. I still hear clanks in front. Almost like I can hear it more now than before, what can it be?
@RobertMOdell2 жыл бұрын
Homie Hektor. Why do the struts, and why both sides?
@victorr6483 жыл бұрын
There is no shame in speaking. Good video Angel Homie
@jonathancouch7349 Жыл бұрын
You know stuff bro
@misterblack65213 жыл бұрын
Was an alignment needed after?
@lji20003 жыл бұрын
That's a JIS spec screwdriver, not a phillips one!
@veronicagomez96523 жыл бұрын
Do u have a shop in los angeles bc I'm having issues with my 2016 kia optima and I've seen u diagnosed one in ur videos ill appreciate it if u reply back thank u ....
@HomieHektor
3 жыл бұрын
I work from my home garage in Pomona 👍🏼
@Rein_Ciarfella3 жыл бұрын
First, do that thumbs up. THEN watch the video! It’s Homie Hektor - we know it’s gonna be good! 👍🔧🧰
@vinces8974
3 жыл бұрын
Way ahead of you
@Volusiaev
3 жыл бұрын
I always "thumbs up" when starting the video. Hektor never disappoints!
@atom100013 жыл бұрын
Hey hector I just have a question I have a 2018 Chevy Cruze LS and I think my fuel leaks bcuz I leave it idle and my fuel economy sensor mpg it goes down just leaving it idle but once I take off it works but I been having a P0420 sensor code but I haven’t had it for a couple days now so am not sure
@JboBakey
Жыл бұрын
P0420 is catalytic converter code, usually is clogged, broken or have a bad 02 sensor
@user-jm5cx2wz6q3 ай бұрын
Where are you located at I need the same thing done to my civic can u do mine how much would u charge
@2gangsta4tv363 жыл бұрын
Can you please tell me what was the impact you used to take off the tire center bearing. Please let me know. 😚🙃
@JboBakey
Жыл бұрын
Milwaukee Fuel, probably 1/2in
@nishanishu48943 жыл бұрын
Supper
@Whitecranekungfu2 жыл бұрын
Firestone screwed the pooch when they let you go.... great job.
@noec.75563 жыл бұрын
That sounded wet homie 😳
@theram87873 жыл бұрын
You got balls hitting the cv shaft on a pivot. I put a vice grip on the shaft to where it butts up against something hard so I don't mess the bearing up inside the motor. Hard to explain.
@ampecsu
Жыл бұрын
you mean inside the *transmission*?
@Keepin-it-wheel1013 жыл бұрын
great video, can you show how you install the wheel bearings. thanks.
@fredsalter1915
3 жыл бұрын
Take the hub to a shop with a press :-P
@ABQSentinel
3 жыл бұрын
@@fredsalter1915 Completely agree! Press in bearing are a royal pain if you don't have a press and all the different sized cups to do the removal and reinstall.
@vuhuynh7023 жыл бұрын
11:45 damnnnnnnnnnn :)))))) lolllll
@jdmasfucc965 ай бұрын
Yo it was all silence until 11:44 lmfao 🤣 (loud as fart)
@MrTmenzo3 жыл бұрын
Dang never knew an impact driver can take much use.
@jeweldawson56683 жыл бұрын
Hey Hektor,ive been watching for a while & im a c-tech @ Firestone & I’m worried electric cars will end my career,can we work on those or we as mechanics done?
@ronsimmaculatedetailing6335
3 жыл бұрын
They still have suspension components and they will still break down. You just have to learn electrical and u will be fine.it will take a long time for gas to be phased out trust me. Probably not even in our lifetime
@jeweldawson5668
3 жыл бұрын
@@ronsimmaculatedetailing6335 yeah I’m about to be 21,the minute I have to do something to an electric car,I’m tearing it apart to learn how everything works
@twistedwrench4903 жыл бұрын
lol that fart though!
@bendercs10 ай бұрын
The fart was unexpected - 🤣😂
@megaruhe62963 жыл бұрын
1:11 Hey! What you looking at?
@elmermt11 ай бұрын
11.45 what was that?
@PhillyDee2153 жыл бұрын
Easy money 😉
@elcocoreyes3 жыл бұрын
chingao...😂😂😂...🚶🏾♂️💨
@ragetotheend3 жыл бұрын
What add is at 7:53 ??? I cannot see pass that mark. On both chrome and Edge web browser. Also nice videos but i think ppl like to understand how you diagnose a problem. Just viewing you do get some of the infos. But not everything that is necessary. But good video.
@misterblack65213 жыл бұрын
Cute baby
@cashewABCD Жыл бұрын
How many miles on that Honda. Comes apart like brand new. Minnesota make a mess of cars.
@georgebonney903 жыл бұрын
👍
@frontspring13 жыл бұрын
Hector don't play with them honda engines.
@gianfrancoa3 жыл бұрын
No wonder the struts were bad, they keep putting the same Chinese quick struts
@bird2can3483 жыл бұрын
Easy squeezee lemon peezee!
@deespasojevic30133 жыл бұрын
Nice one! You got a 9 to 5 yet
@SG84
3 жыл бұрын
Lol.. So he can be robbed in the form of taxes and make less money.. Hmm.
@MEGVTRON
Жыл бұрын
Hahahahaha
@Paul-sh4on Жыл бұрын
GREAT VIDEO....BUTT I THINK YOU SHOULD CHECK YOUR SHORTS FOR SOME MUDD LMFAO
@cruelty1x8683 жыл бұрын
lmfao 11:45 and 13:43
@Dustyfingers11 ай бұрын
Have that same rumbling noise on my 99 civic. Changed the front right bearing 6 months ago not noticing any play on the wheel. Noise and vibration goes away when making right turns
@canadianpopeye80663 жыл бұрын
Wheel bearing are a pain in the butt.
@vuhuynh702
3 жыл бұрын
buy the bearing kit with 1/2 Milwaukee electric tool take off easy man
@MartinM043 жыл бұрын
Bruhhhh say something. Silence
@6xflowerranch89010 ай бұрын
Dude your ads are longer than your video 🤦🏻♂️
@zekthefreek61413 жыл бұрын
I think you spoke a lil too much in this video 🤨
@radzer09663 жыл бұрын
Honda couldn't have come up with a more useless design. 2 pieces of plastic with grease in the middle as a bearing that supports the whole car. WTF?
@savagevargas92993 жыл бұрын
11:05 Control arm bushing looks like it has had better days. just saying ok bye.
@Whitecranekungfu2 жыл бұрын
Firestone screwed the pooch when they let you go.... great job.
Пікірлер: 100
I prefer your upbeat personality over silence
@MavGamingTv
3 жыл бұрын
I second this. Amsr is not for you. You've a great contagious personality and mood Homie Hektor let it shine. Kudos ✌
@NewzAndReviewz
3 жыл бұрын
I like the silence if he is naming parts on the screen that he is putting back on. Silence only works if the mechanic is already a pro or familiar with part names. Id like to know when using the hammer what are you looking to hit and why just looks like he was banging away. Then at the end looks like he bent someone in the middle before adding the tire lol and i dont know why makes me scared to try even though i saw it
@emptytomb4967
3 жыл бұрын
@@NewzAndReviewz he needed to get the ball joints out of the holes, since they're tight and/or seized (joints are tapered), and the hard metal is the best place to shock it loose (instead of directly hammering the joint). also, at the end, he's 'staking' the axle nut into the indentation in the axle, as the nut is pliable there, and the staked metal blocks it from rotating and coming loose.
@nolove4442
2 жыл бұрын
He was having a bad day that’s all.
You make it look so easy! I am taking notes on all your video tutorials just in case I am able to tackle future similar tasks. I hate taking my car into the shop and never knowing they will take care or diagnose correctly or cheat and say they need to fix things that are not needed.
For a minute there I thought I clicked on Fix It Angel. 😝 good format.
@deespasojevic3013
3 жыл бұрын
I thought that 2 man especially with the sky view
@vuhuynh702
3 жыл бұрын
hahahha! I thought the same
@cristinavargas4976
3 жыл бұрын
He even farted, like @fixitangel
wow - i'm from Montreal Canada and that Civic looks brand new ! One winter here and its done !
Those rotor screw are paid actors! They never come off that easy
Nice content, smooth like butter. This is where you know someone is seasoned.
This channel is awesome. Glad that i found it.
Hektor, I totally get all your humor in your silencio performance. Great work! Must be really nice to work on a completely rust-free car. Those rotor screws just came right out! Amazing! 👍🔧🧰
That's what a two week old car looks like in the North East. Normally, for when that type of service is required, rust is holding everything together up here. Nice zen-like video, man -Thanks!
Era todo Hector, buen video
11:45 pressure relief valve
@strikke323
Жыл бұрын
13:44 them valves were loaded with pressure 😎💪👏😤
@lancelotray
Жыл бұрын
you mean fart?
@OliMWorld
2 ай бұрын
lol
Time to ALWAYS honk the horn before backing up! Your kid scared the bejeezus out of me walking around the running car! Then sit the whole family down and have a strong talk about never going behind a running car, ok? Thanks, bro. 👍❤️
@rustyshackleford1920
Жыл бұрын
I agree with you bro
Always great to see the kids around, the next generation of mechanics
Cool video. Keep up the great work homie...
11:45 👍
@danielochoa831
3 жыл бұрын
😂😂😂😂
Awesome Video
wow all of those part underneath the car are very clean.
I have never seen those rotor screws come out so easily. Wow
Truth b told I got really nervous when ur boy was behind the car n the car was still running,other than that perfect, gonna have to take u my tundra I have left front noises sway bar or links
Buen video!!!
The big homie hect in the building
I had new struts put on my 2011 Ford Taurus. Still has some clunkiness to driving over rough rough.
That passenger tie rod end looked a little worn, and do you not torque fasteners on steering and suspension components?
i replaced my wheel bearings twice....mavis said they both were bad...im noticing that the difference is that im not torquing the last silver nut...is that really the reason why i keep hearing the humming noise after putting on TWO brand new ones? i bought the preassembled from amazon and the second one was from rockauto
4:19 I learned this from an old guy, use 2 hammers and hit the at the same time on opposite ends. You're welcome.
What was wrong with the strut was it also making noise or did it have a leak do struts make noise when there wearing down?
Thanks for the fart man! Excellent editing and details i like it bro really opened my eyes. That fart 💨 sounded shitty though. I wish next time when u put the parts back on you say the name of the part or flash it in text on the screen for the rookies so we know what part we are messin with just helps n makes it easier but you the shit bro
Do you know much about the power steering pump on these engines?
I just swapped my sway bar with new end links and tighten ever bolt. I still hear clanks in front. Almost like I can hear it more now than before, what can it be?
Homie Hektor. Why do the struts, and why both sides?
There is no shame in speaking. Good video Angel Homie
You know stuff bro
Was an alignment needed after?
That's a JIS spec screwdriver, not a phillips one!
Do u have a shop in los angeles bc I'm having issues with my 2016 kia optima and I've seen u diagnosed one in ur videos ill appreciate it if u reply back thank u ....
@HomieHektor
3 жыл бұрын
I work from my home garage in Pomona 👍🏼
First, do that thumbs up. THEN watch the video! It’s Homie Hektor - we know it’s gonna be good! 👍🔧🧰
@vinces8974
3 жыл бұрын
Way ahead of you
@Volusiaev
3 жыл бұрын
I always "thumbs up" when starting the video. Hektor never disappoints!
Hey hector I just have a question I have a 2018 Chevy Cruze LS and I think my fuel leaks bcuz I leave it idle and my fuel economy sensor mpg it goes down just leaving it idle but once I take off it works but I been having a P0420 sensor code but I haven’t had it for a couple days now so am not sure
@JboBakey
Жыл бұрын
P0420 is catalytic converter code, usually is clogged, broken or have a bad 02 sensor
Where are you located at I need the same thing done to my civic can u do mine how much would u charge
Can you please tell me what was the impact you used to take off the tire center bearing. Please let me know. 😚🙃
@JboBakey
Жыл бұрын
Milwaukee Fuel, probably 1/2in
Supper
Firestone screwed the pooch when they let you go.... great job.
That sounded wet homie 😳
You got balls hitting the cv shaft on a pivot. I put a vice grip on the shaft to where it butts up against something hard so I don't mess the bearing up inside the motor. Hard to explain.
@ampecsu
Жыл бұрын
you mean inside the *transmission*?
great video, can you show how you install the wheel bearings. thanks.
@fredsalter1915
3 жыл бұрын
Take the hub to a shop with a press :-P
@ABQSentinel
3 жыл бұрын
@@fredsalter1915 Completely agree! Press in bearing are a royal pain if you don't have a press and all the different sized cups to do the removal and reinstall.
11:45 damnnnnnnnnnn :)))))) lolllll
Yo it was all silence until 11:44 lmfao 🤣 (loud as fart)
Dang never knew an impact driver can take much use.
Hey Hektor,ive been watching for a while & im a c-tech @ Firestone & I’m worried electric cars will end my career,can we work on those or we as mechanics done?
@ronsimmaculatedetailing6335
3 жыл бұрын
They still have suspension components and they will still break down. You just have to learn electrical and u will be fine.it will take a long time for gas to be phased out trust me. Probably not even in our lifetime
@jeweldawson5668
3 жыл бұрын
@@ronsimmaculatedetailing6335 yeah I’m about to be 21,the minute I have to do something to an electric car,I’m tearing it apart to learn how everything works
lol that fart though!
The fart was unexpected - 🤣😂
1:11 Hey! What you looking at?
11.45 what was that?
Easy money 😉
chingao...😂😂😂...🚶🏾♂️💨
What add is at 7:53 ??? I cannot see pass that mark. On both chrome and Edge web browser. Also nice videos but i think ppl like to understand how you diagnose a problem. Just viewing you do get some of the infos. But not everything that is necessary. But good video.
Cute baby
How many miles on that Honda. Comes apart like brand new. Minnesota make a mess of cars.
👍
Hector don't play with them honda engines.
No wonder the struts were bad, they keep putting the same Chinese quick struts
Easy squeezee lemon peezee!
Nice one! You got a 9 to 5 yet
@SG84
3 жыл бұрын
Lol.. So he can be robbed in the form of taxes and make less money.. Hmm.
@MEGVTRON
Жыл бұрын
Hahahahaha
GREAT VIDEO....BUTT I THINK YOU SHOULD CHECK YOUR SHORTS FOR SOME MUDD LMFAO
lmfao 11:45 and 13:43
Have that same rumbling noise on my 99 civic. Changed the front right bearing 6 months ago not noticing any play on the wheel. Noise and vibration goes away when making right turns
Wheel bearing are a pain in the butt.
@vuhuynh702
3 жыл бұрын
buy the bearing kit with 1/2 Milwaukee electric tool take off easy man
Bruhhhh say something. Silence
Dude your ads are longer than your video 🤦🏻♂️
I think you spoke a lil too much in this video 🤨
Honda couldn't have come up with a more useless design. 2 pieces of plastic with grease in the middle as a bearing that supports the whole car. WTF?
11:05 Control arm bushing looks like it has had better days. just saying ok bye.
Firestone screwed the pooch when they let you go.... great job.