Honda CB350 Timing Light
Автокөліктер мен көлік құралдары
1969 Honda CB350 Timing check with a timing light.
You can check your cb350 timing with a regular automotive timing light. You will need an extra timing cover so you can drill a hole on to it.
Пікірлер: 27
Beautiful bike
@MacrossGarage
9 ай бұрын
Thank you
Excellent! Many thanks for sharing. Love the idea of using a spare cover with the hole in too.
@MacrossGarage
Жыл бұрын
The spare helps a lot.
Love the videos. Always clear and concise.
Been looking for a video on this. Thanks for the help!
This video is like totes useful my guy
Garage ASMR. Love it.
@MacrossGarage
2 жыл бұрын
Works for me.
newbie sir.
Thanks for the video! I have a Draper 52616 timing light, will this work for the reading? Because I heard some timing lights are not compatible for bikes...
@MacrossGarage
2 жыл бұрын
That timing light should work. Cant think of any reason why not. Just make sure your using correct spark plug cable.
@bikeclochard
2 жыл бұрын
Will do, thanks again for your help!
@MacrossGarage
2 жыл бұрын
@@bikeclochard no problem, glad to help.
I have a CM200T. Is the procedure about the same? Can I run it without a cover? I’m asking because I don’t have an extra one
@MacrossGarage
2 жыл бұрын
if there is a circular cover it might be ok. Try it and see if oil spills out. I have never work on a CM200T before.
@missfixitCanada
2 жыл бұрын
@@MacrossGarage ok thanks! I'll keep you posted once I get around to it incase someone asks the same question
There is no need for the second side cover. You can run the bike without it.
@MacrossGarage
Жыл бұрын
Isn’t there a chance for the oil to spill?
@crazylikeafox7341
Жыл бұрын
@@MacrossGarage no. Check out the 28 minute mark in this video. kzread.info/dash/bejne/pIWcmtSfhZCTqLw.html
@JasonSimonSmith
Жыл бұрын
@@MacrossGarage it's super-minimal.. (at least on my '72 cb350k4 bike).. and a piece of aluminum foil draped over lower frame rail and exhaust manifold if you're worried about it.. not like it's gonna puke amounts of oil out.
@MacrossGarage
Жыл бұрын
@@JasonSimonSmith Thanks, thats good to know.
What should the advance be?
@MacrossGarage
2 жыл бұрын
I have mine set on the line. When it was a advance it was having trouble on cold starts.
has to be revved to 3000 rpm
@MacrossGarage
2 жыл бұрын
For Idle? or to measure tdc?
@ronkrill1
2 жыл бұрын
@@MacrossGarage for ignition timing..F