My compliments for producing a well thought out and well edited video. You obviously practiced prior to recording or are very experienced in that regard. So many KZread help videos have running commentary that is completely unrelated or are the ramblings of an inexperienced individual with little self-awareness. Thank you for providing this. It was exactly what I needed to repair my son's Honda.

very thorough. What a lot of people slack on is showing specifics. VERY GOOD.

i successfully changed the air intake hose on my 2003 honda accord today thanks to this video - thank you so much!!!!

@CarsNToys

3 жыл бұрын

Excellent!

@pc6907

3 жыл бұрын

I need to replace mine too, same model and year car. Did you run into any complications? How much time did it take?

@Overdrivesilver

3 жыл бұрын

@@pc6907 it took me about 2 hours, but this was the first time i’ve ever replaced anything that’s not a lightbulb on a car. the only issue i had was prying off the old pieces from the old hose. they were really stuck in there.

Very organised, clear and detailed tutorial. A+ you're made for the camera

@CarsNToys

2 жыл бұрын

Thank you. I appreciate the feedback!

My cousin was replacing the air filter on my mothers car, and her vehicle started to stall. I am going to need to replace the intake hose on her vehicle because she has the same break. As very temporary fix until I get the parts I need, I re-taped electrical tape around the hose (somehow whenever the hose was initially broken it was already taped so I re-taped it). Very straight forward to the point video, so kudo's to you kind sir. Thanks for your time, and information.

@CarsNToys

4 жыл бұрын

Happy to help.

This actually helps I just broke the tubbing to look at the are filter

Your video is very thorough. I appreciate that you didn’t assume or skip steps that a rookie like me might need to see. One thing though, you didn’t replace the spring clamp on the air box side. Was it difficult to get back on? Oh well, I need to replace that hose so I’ll know the answer soon enough. Wish me luck. 🤞🏽

@WingJai1119

2 жыл бұрын

did you end up put back the spring clamp thing?

@pc6907

2 жыл бұрын

@@WingJai1119 Yes, I struggled a bit but was indeed able to get it back on.

As for the spring, what you do is... drive by a Honda dealership and throw it at the building. Then you go to a Harbor Freight or hardware store and buy a 3 1/2 in diameter hose clamp (HF has a 20 piece assorted box for cheap) and it fits in that groove perfectly, as if it were made for it! You're welcome lol

Thanks got my hose replaced in 30 min and air filter. I noticed you disconnected the first connector and my intake hose doesn’t have one. Is that the air temp sensor?

what is the tool to put back the spring around the hose?

@donniev8181

10 ай бұрын

Exactly, I just did mine and i think its best to put the spring clamp on the air tube before sliding it over the air filter housing. I actually replaced the clamp on the throttle body with a standard clamp. The tube pretty much holds itself on the air filter box but im looking for a upgraded version.

For the spring clamp to the airbox, I tried stretching the springs a little before trying to put it on and it was a little easier to brute force it

@CarsNToys

4 жыл бұрын

Appreciate the feedback!

@donniev8181

10 ай бұрын

​@@CarsNToyshow did you get your spring clamp back on?

Thanks for your time and tips! Very helpful my good sir!!!

Awesome! I was able to do it on my 2006 Accord

03:25 My car has exactly that round metallic clamp right there; it's possible to remove it, without having to remove the whole air filter box?? And actually, I can see you did not put it back into the new hose?

Very nice Video . Thank you for taking your time to make the Video

On 7:34 you reconnect the vacuum line. What's the grommet that goes there called? Im having a hard time finding the name online

Thank you I needed this

Just successfully replaced mine today... minus the damn spring clamp... any tips?

I was able to get that spring back on .. I just brute forced it connecting the two ends around the groove on the end of the tube using both hands .. gotta have a bit of grip strength to do it but it can be done

@AK-us5rw

3 жыл бұрын

Any other tips? Seems impossible to stretch spring to meet ends

@steelermia

3 жыл бұрын

@@AK-us5rw only thing I can think of is to connect the two ends and then try to reverse roll it back on carefully by stretching .. of course while the tube is out of the car .. or get someone with some grip strength to do it .. it can be done, I did it

Have the exact same vehicle and did this repair last month....another great video

@CarsNToys

4 жыл бұрын

Thank you.

@howtobecomerich4498

4 жыл бұрын

Was it a success

@Glenn_123

4 жыл бұрын

@@howtobecomerich4498 it was.... Just follow the video. Very simple repair.

@howtobecomerich4498

4 жыл бұрын

Cool man. Jst give our man a like. I love his work. He teches mi much more than he knows

After changing air intake pipe, i am having rev issues sometimes, I have no maf sensor on airfilter box just like you i have MAP sensor.

So it didn’t need the spring connector around the bigger part of the hose? 7:14

The part I bought on Amazon is rubber, malleable like yours, not stiff/plastic like the OEM, only $18. Is it worth keeping? The hole for the air intake sensor is closed, needs to be punched opened. Was going to drop it off at Kohls to return . . .

@franciscopeirat8395

2 жыл бұрын

This is exactly what happens to me. The temperature sensor hole is CLOSED, so you say that it's possible to punch it open? How did you do it? Thanks.

What about the upper spring???

Can you show how to replace the oil pressure sensor and oil pan on a Acura TL

@CarsNToys

4 жыл бұрын

Here are two videos we've done in the past for an oil pan gasket and oil pressure sensor. I'll make a note to upload specifically for the TL shortly. Nonetheless, these will help you: kzread.info/dash/bejne/c56gp6aLZqnff6g.html and kzread.info/dash/bejne/q2xkr8SulMzZiJM.html

"I have a 2006 Accord LX 2.0 (K20) (Made in Mexico), and I bought this hose to replace it. However, the hose code on my car is RAC, and the hose I purchased has the code RAA and is shorter than the other one (6cm). I've searched everywhere and can't find it. I see that what you installed is RAA. On all the websites I've checked, they say it's the same hose, but upon comparison, I can see that they are different."

1:52 what is this connected to? It's can off and I want to replace it

nice job ty

so what can happen to the car if you don't change this tube besides engine codes?

@williamwebster9153

3 жыл бұрын

Suck in debris if you have a massive hole like this one

Did you intentionally leave the clamp spring off?

What's that part at 6:05? The part you reconnect after the vacuum line Just discovered the mechanics forgot to attach it in the last service.

Is vacuum leak can cause more gasoil consumption?

I love what you do.

@CarsNToys

4 жыл бұрын

Thank you! I appreciate the feedback.

Your video is replacing an already aftermarket air tube. The factory one is installed with normal hose clamps on each end. The Dorman tube is sold with the stretch clamp that is an absolute nightmare. Also, the factory vacuum line is very difficult to remove, unlike the aftermarket one you replaced.

Good stuff bud

@CarsNToys

3 жыл бұрын

Thanks for the visit

where is the maf sensor located?

Is the hose the same size for the 3.0 V6?

Does this hose affect the air conditioner?

How long can I drive with a nice big crack in mine

Help!! I can't remove the air temp sensor. Seems like it's stuck. Any tips?

@CarsNToys

4 жыл бұрын

Acura TL?

@rick2402

4 жыл бұрын

@@CarsNToys 2004 Acura TSX

Will the check engine light go off just by replacing the intake hose?

@CarsNToys

4 жыл бұрын

It's possible.

@inultus1

4 жыл бұрын

My buddy just taped the crack in his until the intake hose comes in and just taping it turned off his engine light.

@arthurbrown4244

3 жыл бұрын

@@inultus1 does that crack also make it run with less power?

@inultus1

3 жыл бұрын

@@arthurbrown4244 Any vacuum leak will make you engine run badly. If this is a serious question, as long as it is sealed properly it will run fine. Buddy replaced it with the new intake hose as soon as it arrived. You do want to make sure that junk didn't clog the screen for the MAF. Personally I would clean the MAF sensor, screen and air filter (possibly replace that too) while I'm in there.

Broke mines today replacing the air filter at first my heart went to my ass then I found out I can do it myself I felt better loo

Thanks bro helped alot!

@CarsNToys

4 жыл бұрын

Happy to help.

how much the hose cost?

@CarsNToys

4 жыл бұрын

amzn.to/2ARf1AM

How did you puncture the hole for the air intake sensor?

@robertstjean3009

2 жыл бұрын

Drill

Hi, do I have to disconnect batteries before I start?

@CarsNToys

4 жыл бұрын

Yes, always a good idea. Cheers.

@bravejay02

4 жыл бұрын

@@CarsNToys thanks man

@inultus1

4 жыл бұрын

Personally I would not disconnect the battery if you have a check engine light on. Reason being, if you do it will clear the code and turn your check engine light off and if you had another leak somewhere else it would give you a false sense of security that you fixed the issue. But, when it comes to electronics the safest bet is always to disconnect the battery, I just personally wouldn't worry about it on this because you aren't dealing with any parts that have voltage unless the engine is running.

To everyone doing this. you might as well clean the throttle body with the intake off. Its alrdy exposed and takes 2-3 minutes.

@franciscopeirat8395

2 жыл бұрын

True. Which product you use to clean it?

@DiamondScuff

2 жыл бұрын

@@franciscopeirat8395 Throttle body cleaner

you never put that clamp next to the air filter box back on. :)

@CarsNToys

4 жыл бұрын

Good eye! The end of the clamp was distorted so I opted for a new one.

@AK-us5rw

3 жыл бұрын

@@CarsNToys how do you get that spring back on? Did everything else but that spring is too hard to get the ends to meet and putting it on before hand feels impossible too(I don’t want to take everything off again to do it that way. Help!

@kcurbanhome

2 жыл бұрын

@@AK-us5rw This was the only thing I wanted to know and he didn't show it and ignored most of the previous questions about it.

Did you install the spring?