Yeah, I just yeeted the dust shield off, and it's good to go. Saved about 10 steps.

Can't wait bro

Any chance you could look into a rear disc kit?

Would you happen to know the distance from the rim to the caliper? I'm trying to buy some SSR MK3's rims for my acty in 13". I'm a little worried about the face clearance. Thanks

Nice work

Good work

Do they make anything like this for the Suzuki Carry? Or does anyone know if this kit will work???

Do you happen to remember the offset on these wheels?

Awesome work! With the larger brake calipers is a new brake master cylinder necessary or can the OEM one be used still? And if it's OEM still how is the pedal travel compared to stock?

@willpowered9882

2 жыл бұрын

Although the rotor is about 1.4” larger the caliper is only marginally bigger. The stock master cylinder can handle the change just fine and if there is a difference in pedal travel I didn’t notice it. Haven’t gotten any reports to the contrary as well.

@mikemike8919

2 жыл бұрын

Where do I order the break kit from

@willpowered9882

2 жыл бұрын

@@mikemike8919 the spacers, screws and studs can be ordered from our website in the description and you can search the actual brake kit online using the part number from the description. Often Amazon is the cheapest.

Does anyone have the OEM spec for the wheel studs size, knurl diameter/ shoulder size? Acty HA4 HA3?

So, that appears to be like a 92-95 Civic front caliper and front rotor correct? I'm trying to do this swap and all I'm seeing on the site is your spacer for the rotor. Please let me know. Thanks!

@willpowered9882

2 жыл бұрын

Yes they are eg civic brakes with the 9.44” rotors. The caliper mount will bolt up to several different Honda calipers but not necessarily fit with the bigger rotors etc. The eg civic brakes are a huge improvement, easier and cheaper to get replacement pads and anything bigger is probably overkill for a 1500lb truck.

@mr_trevorball

2 жыл бұрын

@@willpowered9882 this is what i am wondering, as i am going to be purchasing a van soon. i want to know if i can switch out civic parts that would be an upgrade

What about rears?

Do you know the bolt distance of the caliper?

How much further would these push the wheels out?

@willpowered9882

2 жыл бұрын

Approximately 1/4”

@hensondomingo9244

2 жыл бұрын

@@willpowered9882 Thanks man

do you have to do this to all wheels?

@willpowered9882

Жыл бұрын

This is just for the front. Rear have drum brakes and our rear disc conversion has been shelved for the time being. The amount this pushes the front wheels outward is negligible when compared to rear.

Would a wildwood brake kit work?

@willpowered9882

2 жыл бұрын

It would have to be a wilwood kit meant for the 9.4 inch rotors not the 10.3” ones. Don’t think I have seen such a kit though. It would bolt on to the knuckle but being meant for the larger rotor I don’t think it would work with my kit at least.

@tong7145

2 жыл бұрын

I said eff it and just bought the KCO699 kit. I'm going to buy your extended studs right now

@tong7145

2 жыл бұрын

What's the thread pitch on your guys extended studs? M 1.25?

@tong7145

2 жыл бұрын

M12x1.25 I mean

@willpowered9882

2 жыл бұрын

@@tong7145 M12 x1.5 which are the same pitch as standard Honda studs including Acty’s

You moved the rotor 6mm.why on earth would you use studs that long..looks terrible

@willpowered9882

Жыл бұрын

If you install the kit you will see that the thread engagement on the lugnuts is reduced. I’ve seen alloy rims with thicker faces make it actually impossible to get even one thread. Safety is more important than aesthetics. The perfect length would be an odd size stud that would be much more expensive if available at all, these can always be trimmed to fit your specific application.