Honda ABS Module TEAR DOWN what is casing this module to do bad on ALL HONDAs 2013 and above
Автокөліктер мен көлік құралдары
Due to factors beyond the control of RB The Mechanic, it cannot guarantee against unauthorized modifications of this information. RB The Mechanic assumes no liability for property damages or injury incurred as a result of any of the information contained in this video. RB The Mechanic recommends to follow safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, chemicals, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of RB The Mechanic, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not RB The Mechanic.
RB The Mechanic. All rights reserved. Publication, reproduction or distribution of this or any video by any means whatsoever, including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world, is strictly prohibited without the prior written consent of RB The Mechanic.
#hondaabs #moduel #hondaabsmoduel #absmoduel #abs #hondaabsmouelteardown #absmoduelissue #2013accordabsmoduel #2014accordabsmoduel #2019accordabsmoduel #2015accordabsmoduel #2016accordabsmoduel
Пікірлер: 71
I'm about to perform this surgery right now. Got my kester flux, my silver rosin lead free solder, temp at 400, sponge is wet, LETS GO!
@RBTheMechanic
Ай бұрын
Good luck!!
@exisfohdr3904
19 күн бұрын
Silver solder is prone to cracking as it heats up and cools down. It should be fine, but lead tin would be better for this spplication.
Thank you this was very informative. Great solutions too
@RBTheMechanic
Жыл бұрын
Yup u welcome!!!
Success for me! Thank you thank you! I used copper wire from Cat5 Ethernet cable. Original wires would not solder.
@RBTheMechanic
2 ай бұрын
Nice!!!
Bro.. your AMAZING !
@RBTheMechanic
Жыл бұрын
I appreciate that!
Thank you brother for clarifying the problem that it happened in my country, this car model has all the problems, and the service center refuses to take responsibility. They want customers to pay a lot of money to fix this problem. And there are more and more customers who have this problem in Thailand. I thought, like you, that it was a bad design and that Honda should have to recall to fix this problem, but it hasn't happened yet.
@RBTheMechanic
Жыл бұрын
Yup they should defiantly recall it it’s bad wiring too thin contacts
Great information I watch’s German guy on KZread solder a Jeep control box for fuel pump relay and it worked
@RBTheMechanic
Жыл бұрын
Cool, thanks yeah this was bad design
Interesting.. I've had a couple times where I would get a bunch of lights on my dash all at the same time like Check Engine, ABS, Traction Control, etc. The problem went away on it's own and I figured it must be some intermittent sensor on maybe the Canbus or sensor data line pulling down that bus/line which would cause the ECM to think multiple problems. Well if it happens again, I will take a look at this module. Lucky for me, I have 30+ years of soldering experience so shouldn't be a problem..
@RBTheMechanic
Ай бұрын
Yup honda got this issue
Can a bad abs module cause stiff power steering on civic 10th generation? Very informative video
@RBTheMechanic
6 ай бұрын
Yes it can
Did you need to do any module programming when installing used module from ebay???
@RBTheMechanic
Жыл бұрын
No direct fit and good to go no programming
hello, I have a question, my accord has that problem, it's a 2013 EX-L, it has to be the part specifically for the EX-L or it can fit from any other from that same year, something like an LX can work for my car even if the donor is not EX-L? Thanks
@RBTheMechanic
10 ай бұрын
Same answer
@RBTheMechanic
8 ай бұрын
@@MrNormal593 not sure about civic accord is diffrent 13to 17 same
Maybe I should go to a Honda dealer and ask one of the workers to find out if the ABS module for my 2013 Honda Accord is under recall or warrantee, so I can possibly avoid paying for the repair.
@RBTheMechanic
2 ай бұрын
Yes do that
RB Igot all the brake lights on at the rear. I checked the fuses. They good. I checked the brake light sensor. They good. I got the trifecta’s but the abs light turns off but push the break and it turns on. What should I look for 😊
@RBTheMechanic
Жыл бұрын
Wait I didn’t u derstand. Brakes light are on in the back pulse they turn on with braking?
@servo5651
Жыл бұрын
@@RBTheMechanic no they don’t break only stay on
@servo5651
Жыл бұрын
The break lights are stuck on. I push the break and it stays the same. I disconnected the sensor under the break pedal no changes
Love your videos Is it safe to go through eBay. I had a electric laboratories say you need to reprogram it and it could be dangerous when it rains (locking of the brakes).
@RBTheMechanic
11 ай бұрын
Yeah i had one or 2 people do the rebuild off eBay and it was smooth car was fixed
So i replaced the abs pump due to one line not getting brake fluid to a caliper. I re installed my old module due to the car not starting with the one that came with the pump. Now i have all kinds of lights. Would it need to be re program?
@RBTheMechanic
7 ай бұрын
U messed it up even more. Moduel dosent restric brake fluid flow u need to track the line restriction
Vamos ajudar com os defeitos 🚀
@RBTheMechanic
4 ай бұрын
Thanks
how do the professional rebuilders open them without cutting?
@RBTheMechanic
11 ай бұрын
They cut them I seen it and glue it back
Sir thank you very much for this video. Great explanation. I am having the same problem. Lights are on (ABS , traction control…) however they go off when temperatures are low and it’s cold outside. I went to Honda and they confirmed my fear, ABS modulator. I haven’t fixed it yet but they only did diagnostics. $1700 for a part and $ 250 labor. Just was wondering if you have any opinion why this problem is not there when it’s cold outside like 40 degrees Fahrenheit and do you suggest I sent part to be fixed ? Thank you
@RBTheMechanic
Жыл бұрын
Yes I would send it out
@vedranvedran6078
Жыл бұрын
Thank you so much for your response! I heard you said eBay for repairs, could you please suggest particular name of service/business on eBay that I should go with ? Thank you again
@RBTheMechanic
Жыл бұрын
@@vedranvedran6078 u have to search on eBay type is honda abs moduel repair. It should show up and send them message they will guide u
Does the throttle module is integrated on the abs/vsa module?
@RBTheMechanic
Жыл бұрын
No throttle is processed by ecm engine control moduel
I have multiple light on my dash. Brake,fcw,abs, you think its also the connectors inside the box
@215ftr
2 ай бұрын
Honda Accord 2013 exl
@RBTheMechanic
2 ай бұрын
Scan the abs moduel for codes
would you know if 2012 Honda Civic EX will have the same abs modulator pump or this poor design started from 2013? Thx
@RBTheMechanic
9 ай бұрын
It can but I haven’t had any come yet
@maverickperson5443
9 ай бұрын
@@RBTheMechanic thx - I have VSA light and randomly power steering light kicks in, never had ABS light. Any idea what could it be? Planning to scan for the VSA codes.
@RBTheMechanic
8 ай бұрын
@@maverickperson5443 scan for codes first
@maverickperson5443
8 ай бұрын
@@RBTheMechanic seeing two codes 81-20 and 85-01. Battery was recently tested and showed needs to be recharged(alternator is good), can it be bad battery?
@RBTheMechanic
8 ай бұрын
@@maverickperson5443 u need to replace that battery before anything
I have the same problem with Honda pilot 2014 what can I do?
@RBTheMechanic
Ай бұрын
First scan the car for codes in all moduel especially abs moduel
Nissan is good if it's RWD manual transmission
I opened my module up and tried to solder it. I couldn’t get the solder to stick to the connections. I took it to 2 different cell phone repair shops and they couldn’t get solder to stick either. Is it a specific kind of solder? Is anyone else having this problem too?
@AshutoshMishra-qg1eq
2 ай бұрын
Did you try using some flux?
@KB0WXR
2 ай бұрын
I had success removing the coating on the board and contacts and using new solid copper 26 awg wire(from cat5 cable). Original wire is welded on and will not accept solder. I had 4 broken wires. Replaced, reinstalled and no codes.
@TristanVash38
Ай бұрын
@@KB0WXR thanks for this tip. I'm about to do all of this right now.
The abs módulo 3.5 and 2.4 are the same ?
@RBTheMechanic
3 ай бұрын
I don’t think so
I still am amazed that so many people pay through the nose for 'quality' Japanese cars, when a Chevy or Ford will outlast them and require 1/5th the maintenance. I've made a good living working on Jaguar and Land Rover 'quality'. Leaking Nissans with trash go-cart transmissions, and yes, the classic Honda and Toyota electrical systems.
@RBTheMechanic
Жыл бұрын
Yeah
@teenice894
9 ай бұрын
I've owned all 3... chevy , Ford, Honda . They all have their problems and I've replaced a transmission on my f150, Tahoe and accord... no car manufacturer gets a pass when it comes to repairs. It's a pick your poison type of thing with cars, if there was a perfect car everyone would be driving it
They make my favorite motorcycles but outside of that I'll pass... They make great generators great lawn mower engines motorcycles like I said but If I want a car I'll drive a Toyota or a Ford
@RBTheMechanic
Жыл бұрын
Lol yup
@LunaDaSavage
Жыл бұрын
He said Ford 😂
Can i just go to the junk yard and take one out from a crash honda accord ?
@RBTheMechanic
3 ай бұрын
Prolly get same BS better to send it to get repaired
@215ftr
3 ай бұрын
@@RBTheMechanic should I check other things before shipping it out ? Like checking brake fluid and tire sensors?