Absolutely.. Denmark here .. I have been watching and learning from your videos, a lot while I used ST. But then I switch to Homey, a couple of years ago and I have never looked back.. I find it much more reliable, and much easier to make automation, in Homey, Flows... Best regards from Denmark 👍👍👍

@BudsSmartHome

6 ай бұрын

Hi Big Jim. I didn’t realize that you made the switch. I’m definitely intrigued with Homey Pro. We’ll see where this adventure takes me.

Would be interested in if you can connect your excisting smartthings hub and make Homey take advantage of it as a slave/sattelite, like a homey bridge?!

@BudsSmartHome

6 ай бұрын

This is possible, and will be addressed in an upcoming video. Stay tuned.

Bud, really nice coverage on setting up a using the Homey Pro. I was also thinking about maybe shifting off SmartThings to the Home Pro. I’m tired of wondering if I need an edge driver to enable devices that now work poorly with SmartThings. Homey Pro seems to be overpriced but if it gives better performance & worry free connection to my devices, I’d consider it as an option to go forward with.

@BudsSmartHome

5 ай бұрын

Hi Dan. Yes, I’m finding the Homey hub very interesting and fun to work with. I have a couple more videos in the works. Stay tuned.

@dankelley9361

5 ай бұрын

Hi Bud, a follow up question on Homey Pro. I know your a big fan of SmartThings & now experimenting with Homey Pro. Can you test the same Z Wave device, at the same time with both hubs? Or do you need to exclude the Z Wave device first from SmartThings to be able to test it on the Homey Pro? Thanks, your definitely one of the de facto YT channels that give excellent device on SmartThings.

@BudsSmartHome

5 ай бұрын

Hi Dan . Z-Wave devices must be exclusive to a single hub. Therefore you would need to exclude the device from SmartThings to be able to add it to the Homey Pro hub. There is an alternative way to view and control your SmartThings devices within Homey. This is done with an "unofficial Homey Community app" called "SmartThings 2". With the SmartThings 2 app installed you must then generate a PAC (Personal Access Token) for your SmartThings account. I have produced several Homey content videos that I have scheduled for later release. One of these videos which I have scheduled for March 23rd shows the details of setting up the "SmartThings 2" Homey app. Here is the link to Homey Community Forum Guide for installing the SmartThings 2 app: tinyurl.com/y5wy65ks assuming you want to attempt this approach on your own.

@dankelley9361

5 ай бұрын

Thanks Bud for clearing up this z wave issue for me. Looking forward to see how your interest in Homey Pro becomes more or less positive when thinking of a possible SmartThings replacement

@BudsSmartHome

5 ай бұрын

@@dankelley9361~ Stay tuned.

Hi buds, when are you going to do a video on homey and smartthings? Im using ST and I want to know if I can use it with homey without interference and if I can do some Automations that I cannot do on ST.

@BudsSmartHome

2 ай бұрын

Did you review this video? Control SmartThings Devices in Homey Pro (No Migration Needed!) kzread.info/dash/bejne/pJOkpLGzgLW7YZs.html Here is my website guide: www.budshomeautomation.com/post/install-the-smartthings2-app-in-homey-pro-using-the-cli-install-method-windows-os

Bud, when I looked it didn't have a Kwikset app? I'd consider the Homey Pro if it can add my Kwikset smartlocks along with the functionality of adding and deleting user codes like the Smartthings "Smart Lock Guest Access". Do you have any smart locks in your home? Secondly, Did you try to add the Third Reality vibration sensor. It wasn't in the list of Third Reality devices when I looked. Tom

@BudsSmartHome

5 ай бұрын

Tom, Thank you for your questions. I could not find support for Kwikset locks. I checked Homey's Apps and the Community Store Apps. According to this link from Reddit (6 months ago), Kwikset locks are still unsupported. www.reddit.com/r/homey/comments/147ca3t/comment/jt66cl6/?context=3 I have the UltraLoq U-Bolt Pro Z-wave deadbolt. I have not tried to connect it to Homey but I doubt that it has support. It is going to take awhile before many of these devices are integrated with Homey. Right now it appears that mostly EU and Asian manufactured devices have the most prominent support. As for the TR Vibration sensor, I just unpaired my sensor from ST and the attempted to pair it with Homey. It easily paired. It is displaying as a "Vibration Sensor. It works fine and is very responsive. The alarm display as a "Generic Alarm". It also displays the Battery type, (2x AAA) and the battery level percentage.

@BudsSmartHome

5 ай бұрын

According to the Homey Community Forum the UTec Ultra-Loq Z-wave Pro deadbolt is not supported. The Community post here: community.homey.app/t/u-tec-ultraloq-u-bolt-pro-z-wave-not-connecting/85778

@williams4312

5 ай бұрын

@@BudsSmartHome Bud, Thanks for the info. Glad to see the vibration sensors was recognized. I have 4 Quikset smart locks so I'll wait till it's a little more mature in the US market. Thanks for the review and info. Tom

@BudsSmartHome

5 ай бұрын

Sounds like a wise move Tom. The hub definitely needs to mature more in the US.

@williams4312

5 ай бұрын

@@BudsSmartHome I may get the Homey Pro and move most lights, plugs, sensors and the routines associated with them from Smartthings but leave the Kwikkset locks, door contact sensors and sirens for home monitoring until Homey Pro adds support for those devices. I've reached the "soft limit" on my Smartthings hub so it's time to consider alternatives. I'm looking forward to you post on "bridging" Smartthings and Homey Pro.

Homey Pro will not pair with WEMO or Meross devices and I have a lot of them! The apps on Homey Pro only show EU outlets? What did I miss? Is there a version for USA?

@BudsSmartHome

5 ай бұрын

Did you install the Meross app? homey.app/en-us/app/com.meross/Meross/ There are several devices supported by that app. I do not see an app for Wemo devices. There is currently no support for several US devices, however I expect support to increase as the hub grows in popularity. I sent an email to the developer asking about the status of support for US smart plugs.

Homey has actual controls for Chromecast where even gooegle doesn't do....

@BudsSmartHome

Ай бұрын

Absolutely!

I can't invest in such an expensive hub if they don't have the new z-wave 800 chipset. Also the ethernet should be build-in and not a dongle. one thing i hate about z-wave is that I need to scan the QR code, might be a good idea if homey can save the keys and use them again instead of forcing us to scan QR code every time we want to pair again for one reason or another.

@BudsSmartHome

6 ай бұрын

Thank for commenting @FawziBreidi. The hub is certainly pricey, I'll grant you that. It does come with the 700 series z-wave radio rather than the z-wave 800 chipset, as you stated. I suspect it is because Z-Wave 800 series launched in 2021. I cannot comment about the "need to scan a QR code for z-wave devices". This was not a requirement when I add devices using the z-wave protocol. I agree that the ethernet should be built in the hub.

@aeroflack

6 ай бұрын

I think this is a very powerful hub since it's web app allows you to make almost anything with their advance flows feature. I also congratulate you Bud for creating content with this new Hub, I really think you should consider changing to Homey cause I found smarthings been unreliable with some routines. Can't wait to watch more content about this Homey pro hub

@BudsSmartHome

6 ай бұрын

@@aeroflack ~ It's a very capable hub. However it currently lacks support for many devices. The list of compatible devices is continuing to grow. I really enjoy the process of advanced flows and I will be creating more content in the process.

homey doesnt work with galaxy phones!! so yall know

@BudsSmartHome

5 ай бұрын

That's unfortunate Hasim.

@rolandrohde

5 ай бұрын

Galaxy phones are just Android phones, so why wouldn't it work? What exactly is the catch here?

@BudsSmartHome

5 ай бұрын

I browsed the Homey Community Forum, and did not find anything to suggest that Homey doesn’t work with Samsung Galaxy phones. I believe Hasim may be misinformed.

@hasimaktas9642

5 ай бұрын

idk it doesnt work with newer galaxy phones, the app does work, but the connecting progress doesnt work u cant connect the hub to your wifi@@rolandrohde

@DaLLe3390

5 ай бұрын

I have an galaxy s23, and the homey pro 2023 hub. No problem here...