Super travail. Bravo!

@mr.ranyhomemade2466

15 күн бұрын

Thank you for your patience. It worked amazingly without plasma but is Too old and will upgrade my new design and easy then.

Woooa this video is so awesome my friend 🥰 thank you so much for sharing it with us, your doing a great job keep it up, may the lord continue to bless you abundantly also with fresh inspiration, my friend stay safe and see you again soon 💐🔜🤍💯🤍💯🌹🤍

Parabéns Sr. Rany 👏👏👏

Parabéns amigo!! Seu porta máquinas, ficou muito top!! ❤️💜❤️👏👏👏👏👏👍🙏🙏🥀

I had a lot of old pipes and rebar to cut up and from what I read kzread.infoUgkxPDBfLu68o58Aw85O_J-zIFfjJARBhp-3 this would be the tool for the job. Since I had never used one, I watched a couple of youtube videos and I'm so glad I did. Some really good safety tips, which I followed, and this tool did a splendid job. One good thing to know is the weight of the tool puts just about the right amount of pressure on the metal I was cutting, so I didn't have to use a lot of pressure, which is more likely to jam the tool. It made fast work of my job.

Nice idea thanks for sharing

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and will upgrading to the grinder soon because can help me more thing

Very nice

Hermoso proyecto, pero difícil de hacer para uno mismo, porque SIN MEDIDAS NO SE PUEDE CALCULAR. Felicidades por su proyecto. Atte. D.J.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks so much for your kind comments about

I appreciate the ingenuity here and working with what you have, making the best with what you have available to you. I'm considering making one of these for myself with a few modifications to suit my needs. Excellent video.

@mr.ranyhomemade2466

8 ай бұрын

Thank you for reaching out. I have done some machines because this

PARABÉNS FICOU TOP👍👋

Great and useful, thanks for sharing....

@mr.ranyhomemade2466

2 жыл бұрын

Thanks you you too for Watching

Very good idea

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Belo trabalho da dando inspiração para adaptar as nossas necessidades! Simples mais bem objetivo e seguro era o que eu tava precisando ver vai me ajudar bastante e a outras pessoas ! Valeu muito obrigado!!!

@mr.ranyhomemade2466

8 ай бұрын

Thank you for reaching out. I have done some machines because this

You guy so clever to make all of things for use at home

@mr.ranyhomemade2466

3 жыл бұрын

Thanks my friend

Estupendos trabajos felicitaciones

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

Show, parabéns

Parabéns excelente dispositivo para corte.

Да нормально , мне понравилось удачи.

@mr.ranyhomemade2466

7 ай бұрын

Thanks Is not perfect at all but I will definitely try my best,

Multi bom seu trabalho Vai me ajudar muito O sua idea Deus te abençoe

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment on my KZread video

Mui buena creación 😮

@mr.ranyhomemade2466

10 ай бұрын

Thanks for your best watching. I do love my homemade but everything that expectations is not sound the plan because I spend over my budget compared to my income and hard work because don has any tools and equipment. Now not sure keep doing it or not. Thank you again

Good job

@mr.ranyhomemade2466

3 жыл бұрын

Thanks bro 😎

Ficou top das galáxias parabéns

@mr.ranyhomemade2466

7 ай бұрын

Thanks for your patience to watch my video

Привет Мастеру благодарю за видео зачёт вам..блогодору за советы спасиба...,,,

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment

if you add vertical adjustment for the angle grinder (by modifying the ends of the horizontal support rectangular profile, i.e) I think this is a very good and practical design.Thanks for the idea !

@mr.ranyhomemade2466

3 жыл бұрын

Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too. Thanks 😊

In my opinion only one side of the table is useful and with some modification to move angle grinder vertically you can keep using this tool for small discs too. Very nice work bro.!

@ksmith7122

3 жыл бұрын

so he can move it aong the x axis only as things stand. Vertical slide for smaller (worn) dscs as another comment says, or z-axis, and y axis for use of whole of table. the se are good points but maybe he did not need thoise. Also makes the project considerably more complicated.

Good

@mr.ranyhomemade2466

11 ай бұрын

Thank you

Your work on this cutting tool has inspired me to build my own been working on it now for a couple weekends I will try get some video of my progress and post it to my channel, I used diffent materials because they were affordable, I don't know about where you live but here in Florida u.s. steel is insanely high priced

@mr.ranyhomemade2466

8 ай бұрын

Thanks for your work, let's build this because my workshop has done a great job with it. I knew nowadays very easy-to-use plasma cuts almost everything, but my place how have lived here is very poor quality so nothing. So only this helpfu. Thanks

@donstoddard3525

8 ай бұрын

@@mr.ranyhomemade2466 one of the most appealing features of this method of cutting sheet stock is by not using a torch or plasma cutter it minimizes warping the metal .

great and very useful. Thank you :) What are the roller parts called? I need to build a simpler version of this, more akin to a simple saw table. Becasue I need to cut long thin parallel strips of Aluminium. May be pushing the metal through a saw table is too risky and I should clamp the metal and have a moving grinder as you do. Your thoughts? Great video of very nice idea, thank you :)

@mr.ranyhomemade2466

3 жыл бұрын

Thanks your comment and sharing info together, I do made angle grinder I focused big pieces and thick metal cut because impossible to purchase plasma cutting track , but I have angle grinder it making me had done good job too. I do have clams protected metal as l cut angle grinder run perfect. Thanks 😊

@ksmith7122

3 жыл бұрын

I built a simple saw table with the angle grinder mounted underneath yesterday. The grinder blade is spinning away from the side I push the part in. I completed it and used it for the first time today. I built it using 18mm MDF. I designed the table "on the fly", with room for (1) access to grinder switch underneath, although I switch at the wall, and (2) blade release for blade change. It is very effective, and necessarily robust. So far I have only tried cutting 4mm thick aluminium plate into 10mm wide strips. With my design blade change is easy. I can now make aluminium strips easily and accurately. Glad I built it, making these strips is now much easier. Thanks for the inspiration :) I will post up basic video if I get a moment.

cool

@mr.ranyhomemade2466

3 жыл бұрын

Thanks

Top de mais

Thông minh quá bạn ơi

@mr.ranyhomemade2466

6 ай бұрын

Thanks for your help me to watch videos and I do hope you like it. I knew my work seemed to slowly cause budget and tools as want is not easy to find out and I am living in the third of World so everything I made most of my brain because things not many over here. If you enjoyed please help like and comment and sub for my improved next project.

Super ok

@mr.ranyhomemade2466

Жыл бұрын

Thanks This slider cut the best my project

GOOD

@mr.ranyhomemade2466

2 жыл бұрын

Many for your comment we hope can share info together

Show bem explicado

@mr.ranyhomemade2466

Жыл бұрын

Thank you for your interest and comments

❤👍

@mr.ranyhomemade2466

4 ай бұрын

Thank

Amin Firman Tuhan Terimah kasih Pak Pdt

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Супер

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

👏👏👏👏👏👏👏🇧🇷

what bearings did You use? or depends on the bolt? (what measures?) Thanks in advance

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment I’m so happy to share. Well, the bearings I used diameter 8mm in, 25mm out but you can use anyway as you want with bolt and the pipe 4*4 and the bed 120cm*60cm. It help me do a lot of work, Lathe, Chop Saw Cutting Steel, Belt Grinder, and Drill Press and now I'm planning to make a milling machine so I just upgraded cutting edge slider to slash cut. kzread.info/dash/bejne/nYKnz7CPe86clLA.html. Thanks again

puedes poner las medidas por favor ...gracias

Excelente trabajo, por favor pondría las medidas deducir las medidas es difícil

@mr.ranyhomemade2466

Жыл бұрын

Thanks 🙏

Como faço pra conseguir o desenho desse dispositivo com as medidas? Brasil

If one could install a dedicated metal cutting blade it would cut a lot better and very little sparks.

@mr.ranyhomemade2466

2 жыл бұрын

Many for your comment we hope can share info together 🙏🙏🙏

nice work can i have plans please

@mr.ranyhomemade2466

2 жыл бұрын

Thanks my friend Of course it really helpful especially I using for cut thick plate metals

Is the workpiece being cut very precise? Please answer, friend

@mr.ranyhomemade2466

5 ай бұрын

Thank you I'm not sure you mean please

Suprised this does not have more views, it is closest to what I am looking for that I have eben able to find. I need to cut thin long strips of aluminium. A saw table seems closer to my needs where I pust the piece through. Anyone thoughts on an angle grinder in a saw table for metal?

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment on my KZread video. It was amazing and helpful for my work and had done more things with a guy especially to cut plates thick metal. and will be upgrading more to be easier soon.

этого видео полным полно на ютубе. Короче один мозг на всех.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

Класс

@mr.ranyhomemade2466

2 жыл бұрын

Thanks your comment

Доброе утро! Все супер так держать жалко что не умею читать и писать на вашем языке, а можно размеры?

Profil holo dimensi berapa ukuran besi holo bagus ide kreatif

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

45 градусов нету ?

v groove gate bearings and a flat bar would have been way way simpler and cheaper

@mr.ranyhomemade2466

10 ай бұрын

Thank you Recommended. Is not easy to find. But I'm happy with it helps me a lot to have done some machine

@preciousplasticph

10 ай бұрын

@@mr.ranyhomemade2466 they are used on gates. Very cheap. 2 dollars usd each. Even in Philippines easy to find

make the arm holding the cutter longer, then the cutter can lower it deeply

@mr.ranyhomemade2466

2 жыл бұрын

I do love it because all my machines as I made because it

Тяжело идёт,как будто не на подшипниках.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

Máy này bán bao nhiêu mình muốn mua một chiếc

@huyromaquang5506

Жыл бұрын

Mua được chưa bạn

Xin giá bộ này ạ

@mr.ranyhomemade2466

2 жыл бұрын

Thanks you

1 bolt is not enough. The tool is traumatic and needs the best fixation. When biting the disk, the angle grinder will try to run into the material, and the bolt will not be strong enough to bend and will bend. In this design, cutting material is possible strictly from left to right. Otherwise, a crash may occur associated with the angle grinder running into the material when biting. The angle grinder's leash is too short, which does not allow the use of a small disc. But in general, even such a design is better than sawing sheets without a mechanism.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for sharing and your comment I thought is not perfect at all but it helped me a lot to next project especially to slide cutting big plate metals are like homemade lathe, chop saw welding table and more, I want make equipment to be good but in my country is not easy looking for and cost so expensive. Thanks again

ببخشید قیمت اش چند است

Potong 45° ngga ada

@mr.ranyhomemade2466

2 жыл бұрын

Thanks 🙏

I am not happy noting that there are very few views to your smart ideas so I guess something is wrong with the title?? further I guess you have to work on the audio too. Video is very clear but your speech is heard hardly and the music ..........its a positive comment so please dont mind it.

@mr.ranyhomemade2466

3 жыл бұрын

Thanks for your recommendation I knew not that good because I haven’t enough tools and not that strong sounding audio all my videos as I did just by phone and upload by phone I needed more equipments but Budget...? I really appreciated your comment

hopeless device. waste of electricity and time.

@mr.ranyhomemade2466

5 ай бұрын

Thanks. I living in the third country so everything is not perfect cause by hand

@augustocoutinho4291

4 ай бұрын

Great start God bless

@obnoxiously_yours4807

4 ай бұрын

you can make something useful then...😂

Muy buen trabajo, con todo respeto, ¿que significado tiene las uñas largas de los dedos meñiques? Se ve muy mal, en mi país se relaciona con la delincuencia

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment

The reason you dont see these commercially is because these things will kill you when they are on a swivel like that. Its brilliant and basic but extremely dangerous set up this way