Great job, it’s always satisfying to make something out of nothing with your hands and talent no matter what the cost is! Usually make better product also! Thanks again keep up good work.

Wow thanks so much for the vid. Im looking to build a sandblaster like this as im way tired of the small handheld one which I have to constantly shake to get any sand out. Now I just need to see if we got any old gas tanks laying around I can use.

Nice job best I’ve seen so far.

Looks solid. Fantastic welds with the stick!

@iu2297

3 жыл бұрын

How much did it cost all in??

Hi meverick.very good job. May you list what size of pipe used n other thing has been use to make this sandblasting?

Great idea, I'm going to be building one of these. Would it have been better/ easier to use the blaster to take the paint off the gas bottle.

Excellent piece, thanks for sharing.

Thanks for sharing this informative and useful video

Awesome design man! What sizes of fittings and valves did you use?

That’s really nice job mate thanks to share this

Good idea. We admire such technologists ' Jogaroo Engr. " after Jigs /Fixtures.

Hi Could you precise all the dimensions of the tubes you used ? It would be very kind from you!! Another question : where did you find the big piece of tube and the tap used to fill with the sand??? I've never found any on the web😱😱 I saw tones of videos about that but your sandblaster is in the top 3 for me thanks to the simplicity and all the "options" like the protection for the pressure excess or the manometer etc

Hi Maverick, Do you have a list of the parts needed to build the blaster ie. 1. gas bottle. 2. gadgets etc...

Those stick welding skills are awesome m8 ! 😍😏👌👍

Man, I haven't seen someone lay down beads that nice with a stick welder in years. My father was an old school fitter and turner who taught me how to stick weld, still can't get em that clean.

@joryzhao8042

3 жыл бұрын

www.amazon.com/Carbide-Sandblasting-Sandblaster-Abrasive-Replacement/dp/B08QN1QSGP/ref=sr_1_57_sspa?dchild=1&keywords=sandblaster%2Bnozzle&qid=1610607075&sr=8-57-spons&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQU5BMEZPRDFNRVU1JmVuY3J5cHRlZElkPUEwOTQ3MDM3NVZIRkwwMko3VUhEJmVuY3J5cHRlZEFkSWQ9QTAzNTk5NjgzTlpUQVRUT05MU0M4JndpZGdldE5hbWU9c3BfYnRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1 this sandblaster boron carbide really helped me a lot, share with you,hope it can be helpful to u!

Ωραια κατασκευη και πολυ καλο βιντεο!

Nice job 1 question why did you not use rusteolum hammerite paint it give your tank a nice finish and if you scratch or sent SPRAY covers most deep.scratches I did my so compressor

Nice sand blaster. I have a single piston compressor. Do you think it will work? Or it's too slow to raise the working pressure

Nice creation! Can you please help me with the size of the fittings used?

Thanks you so much for you contribution. 🤩👍

Good job 👍👏

Excellent 👌

good job :) 1/2 or 3/4 ?

Hey. What diameter does the electrode have? What current strength did you use?

good job

Good Job :)

Hey Maverick. It was good to see someone use an arc welder, and can actually weld. Anybody can mig. Good job. Peace

@MaverickProjectsOfficial

4 жыл бұрын

Its AC stick welder and its about 20yo. Its hard to work with it . Difficult to start sometimes need many hits sometimes stop and more but ok its work..... btw I will buy a new dc stick welder soon. Thanks for your comment dude!

@notgivennotgiven7776

4 жыл бұрын

@@MaverickProjectsOfficial I've got my dad's old buzz box. I always liked welding with it. It's a Montgomery ward, so that tells ya how old it is. This one has a slide controller for the amperage, so you can put it were you want. I like that feature. Happy building

@MaverickProjectsOfficial

4 жыл бұрын

Ac welders its forever .... Dc welder is recyclable!!

great video

do you connect the conpressor to the T pipe above ?

Is this easy to make may i ask,?

Great job man ! I'm going to make one . Thanks for posting

@eliseogomez194

3 жыл бұрын

wff

@eliseogomez194

3 жыл бұрын

lm

Great job. Tell me please how long this fuse nozzle works?How long can you sand on it? What is the 6, 10 or 16 amp fuse?

@pawe3030

4 жыл бұрын

I think its no difference between 6/10/16 amp fuse, its the same size only wire inside have different diameter for right amp :)

@TheZafek

4 жыл бұрын

@@pawe3030 A to może po Polsku napiszę bo chyba krajany my sa:,-) a na jak długo wystarcza to piaskowanie taka dysza? Nie zużywa się szybko?

@pawe3030

4 жыл бұрын

@@TheZafek Sądzę że kilkanaście roboczogodzin. Takie bezpieczniki grosze kosztują więc to żaden problem wymienić nawet co tydzień :)

*Fast forwards to see if this guy is building an IED* Oh this guy DID put the safety pressure relief valve on his tank LOL

What hose did you use ?

Good job, great stick welding. What kind of electrodes did you use?

@jesusreyes7476

2 жыл бұрын

E-7018 works fine for this kind of projects

Hi what kind of rod did you used a 6011 or 7018 for that nice projet

@jesusreyes7476

2 жыл бұрын

You can use 6010 for root pass and 7018 to fill

We admire such technologists " Jogaroo Engr. " . Aso pls demo hose and compressor connections

Hi sir, may I know the names of materials needed to this 😁 If it's okay to you 😊

What stick size you use and at what amps ?

Thanks alot.good job

@MaverickProjectsOfficial

Жыл бұрын

Thank you !

Great work! Did you use that fuse casing as a nozzle?

@MaverickProjectsOfficial

4 жыл бұрын

Thank you !!! Yes and its works fine. You will see it in my next projects if I use the sandblaster.

4 жыл бұрын

@@MaverickProjectsOfficial Yep. I keep watching. That nozzle is a great tip! Thanks

BOOOOOOM 💣

@noanoa4283

3 жыл бұрын

Nema plina unutra halooo

You should put descriptions i.e. sizes and stuff

How much presure need to work good, and how much capacity is your compresor tank

@MaverickProjectsOfficial

4 жыл бұрын

Its works nice 6-8 bar . My compressor is 200lt.

@blacksea69

4 жыл бұрын

Hi What kind of compressor i could use to make a good sandblasting at least? My father has a 100 l but its only 16m3 /hour that is to say a 266 L / min Do you think it would be ok ?? Thanks again

@_y_a_h_i_k_o_5476

4 жыл бұрын

@@MaverickProjectsOfficial 200lt. Its huge and good good to use i think. I have a plan to buy 50lt. With 8bar its that ok?

Missed the opportunity to sand blast the diy sandblaster 🤯

Todo bien pero porque no aplico el sand blasting al tanque con la misma arenadora

Excelente trabajo Solo una crítica Debió remover la pintura con la misma arenadora

I want this

Hi nice work but instead of grind your tanks sand blast then air blow paint after

Why do you insert water at the beginning ?

Good job. I hope those fittings you welded are not galvanized.

Heii mii pregunta es. Como se. Lo. Vuelve a cargar

👍👍👍

Why is your welder so smooth!! Is it an AC welder?

@MaverickProjectsOfficial

7 ай бұрын

Yes right! In this video I used AC welder!!

@AutodidactEngineer

7 ай бұрын

@@MaverickProjectsOfficial Would you tell me which brand? A part number would be so helpful!

Why didn't you actually blast the blaster before you painted it instead of sanding it by hand 😅. Great job

I have one question...where is the air intake ...I don't. See compressed air entering

@imaverick2000

4 жыл бұрын

I am pretty sure that the supply disconnect is in the front on the right. You notice he put a "T" fitting on the front to pressurize the tank and ran a hose from there to the bottom "T" to pick up the sand and ran the discharge hose out the back between the wheels. It looks like the discharge hose is coiled up on top in the very last of the video. I would use a male quick-disconnect so I could just use the same hoses i use for everything else in the shop. The only thing I would change is to put the shut off valve on the quick disconnect side so I don't get the spew of air when you disconnect. Also I would put a 20 micron water trap on the supply side. You can pick up one for about 20 bucks at home depot or sears., sorry lowes. Damp sand doesn't work well at all. I also use play sand and run it through a screen. I made a screen funnel and placed it in the top. It is a whole lot cheaper than grit and easy to re-use, just filter it again. Hope this helps. If I am wrong, please feel to correct me. Please be sure to use a respirator and face mask. The sand dust is just as bad for your lungs as asbestos. I just buy the paper suite at HD and when done throw it away so I don't get sand dust everywhere. When done just blow down and remove the suit. that way you don't breathe the dust when you take your mask off.

@dunpamy3091

4 жыл бұрын

@@imaverick2000 thank you your valuable reply..I will look into it.....thank a lot

Might used some hose on your HANDLE I was thinking cheap that floating snake

What h.p compressor did you use

@MaverickProjectsOfficial

Жыл бұрын

Im using 2hp and 200lt air compressor.

Where is the compressor

Porque lijas la máquina si se supone que la máquina es para eso, QUE INTELIGENTE, no te alegres ESTOY SIENDO SARCÁSTICO!!!!!!!!

Many people scratching their heads at you hand sanding a sand blaster.

If only you had a sand blaster to blast that old tank :)

If only you had a sandblaster to clean the old paint and rust off your tank!!! 😂 Just messing. Nice work.

You should really use some kind of lubricant when you drill holes through steel. Will keep the drill bit sharp a lot longer and will prevent it from snagging on the metal and breaking the bit or hurting your hand etc

Would you sell me one ill will buy

ibix sandblaster is best product and 0.2 to 7 bar air pres

@user-jt7lt5xt3u

4 жыл бұрын

Привет

@ruben4936

4 жыл бұрын

@@user-jt7lt5xt3u Привет

You could sandblast your own sandblaster instead of sanding

bad idea to put airline from bottom because water builds up in the bottom from the air and mixes with the sand for sandblasting

Nice work bit It Is not clear how does It work. Nice Better a schematic

use the sandblast tank to sandblast the sandblast tank

Когда я сделал пескоструй, первое что я очистел сам балон. И потом покрасил

Price in india

@s.k.s.k.1065

3 жыл бұрын

8003273574 price 12000

کاربیست

Why i didn’t he use the sander itself to sand the tank before spray painting it? Lol

Nice work, but not a money saving venture.

forgets to fill it with water...ends up on best gore...

It shame that we have to do lot of guess work as you didn't thoroughly explain how the system is going to work and the safety in place. Really disappointing as the video itself was awesome. Now I have to go and search more videos to gather more information. It's like giving hungry cat a fish suspended high up in clothes line 😲🤔😟🧐🥴

Time! Lapse! Just sayin...