Homemade PC case/自作ケースの自作PC【Diy】Gaming PC Build
I made a PC case with an aluminum angle and an acrylic plate.
・The feature is that the I / O panel comes to the top, the lid is opened and closed, and the plugs can be inserted and removed.
アルミアングルとアクリル板でPCケースを造りました。
・特徴はI/Oパネルが上面にきて、蓋を開閉して、プラグ類を抜き差しできる構造にしました。
specification / 仕様
・M/B:ASRock B365M Pro4
・CPU:Core i7-9700F
・RAM:4GB×2
・GPU:MSI GTX1060 GAMEING X 6G
・SSD:M.2 NVMe 256GB
・HDD:2.5 inch 1.0TB
・HDD:2.5 inch 1.5TB
・Power supply:SCYTHE 剛短3 400W
・CPU cooler:SCYTHE 虎徹 MarkⅡ
・DIMENSIONS:L 280mm, W 206mm, H 416mm
material / 使用材料
・Aluminum angle:L-25×25×2 1m
・Aluminum angle:L-20×20×2 1m×3
・Aluminum angle:L-15×15×1.5 1m×2
・Aluminum angle:L-10×10×1.2 1m
・Aluminum flat bar:FB-20×3 1m×2
・screw:M3, M4
・Acrylic plate:Grace smoke color, thickness 3mm
・Spray paint:Black 1
twitter: / buccticti502
Пікірлер: 217
逸品の一品もの。動作時のイルミネーションも上品ですね。マイスターという言葉が頭をよぎりました。
もうね、逸品(一品)物で売り出しても 買い手がつくレベル❗ 素晴らしいですね🤗✨
すげえ。 プロだろもう...
最初のイメージの段階でプロの犯行でわろ
This is the true PC "build"
@mattivirta
4 жыл бұрын
idiot build you mean. yes has idiot because not have anythink better case than you can buy 10$ old case many shop. and japan and china can buy 4$ lot better case all shop.
@Majonez616
4 жыл бұрын
@@mattivirta link please
@mattivirta
4 жыл бұрын
@@Majonez616 i has buy all my 12 computer parts at bangkoko super mall were have 7 floor only new and usedcomputer parts. cheap place buy all what newer need.
@mattivirta
4 жыл бұрын
and ewery countryy have old used parts selling shop were have computer cases too, i looking my hometown finland wery expensive normal but used old cases can buy less than 10€ and old vga dispaly can buy 5-20$ lot lot lot.
これ既存の製品の中でも煙突pcで構成出来るpcケースを越えてますね!何よりmini-itxではなくMicro ATXな所が素晴らしい! 前回のオープンフレームpcのように是非、図面を公開していただきたい!nzxtのhー1買おうとしてたけど私もコレ作りたいです!他にも真似してこれ作りたい人絶対居るはず!
超かっこいい! 売ってたら絶対買うレベル!
職人か~!という突っ込み待ちのような出来でびっくり。のこぎり使ったりやすりかけたり、手作りでできるんですね。すごいです。 こんな精度だせない。どっかで崩壊する。
@Diy-lv4ps
Жыл бұрын
ご視聴ありがとうございます。手作りに見えない仕上がりを目指しています。
自作PCケースってロマンありますねー😊
Very inspiring video on DIY PC case!
I/Oパネルが上向きで天板を開閉するところが良いですね。
that was so relaxing. thanks Aniki.
すごく惹きつけられる動画です!
@Diy-lv4ps
Жыл бұрын
ご視聴ありがとうございます。
ここ迄やるのは本当に凄いな。 PCに愛が詰まってますね。
@Diy-lv4ps
4 жыл бұрын
ありがとうございます🎵
クオリティすご
Excellent! Very pretty PC!
Its like Silverstone Fortress FT03 matx with the more modern look of Silverstone LD03, surpassing both. Really nice, congratulations!
I like how the back end of the motherboard Faces up, and thus the cpu fan blows the right way
@Diy-lv4ps
Жыл бұрын
Thank you for watching and commenting.
お疲れ様です CAD図面と3D見た瞬間ガチだと思いました 売れるのではと思うほどです
めっちゃカッコイいですやん
理想的なチムニー構造。これだけ詰め込まれているのにエアフローに無駄がない。 できれば実際の起動音やファンの回転音なども聞きたいですねぇ。
初めから最後まで、細かいところまでこだわり抜いていて投稿者さんの技術力に惚れ惚れです。日本語変だけど伝わってほしいこの何とも言えない、んんんん~~~~!!!って感情。 なんていうんでしょう、各部品のピッタリ感!気持ちよかったです。素晴らしいです。としか言いようがないのが自分に表現力が足らないのが悔しいです。
@Diy-lv4ps
4 жыл бұрын
ご試聴ありがとうございます。 こんなに褒めていただいて 大変嬉しいです🎵 実際の製作過程ではもたついたり 失敗したりしているんですが 編集でカットしています。 アイデアはいっぱいあるんですが なかなか時間が取れなくて 製作もままならいのですが 又作品をアップするので、 観ていただけると有難いです。
すごいわ かっこいい プロの仕業だね。。。ほしい・・・
This is the channel I was looking for
@Diy-lv4ps
2 жыл бұрын
Thank you for watching. I will continue to make new things. I look forward to working with you.
Beautiful! Congratulations!
翻訳機の力を借りたので、ぎこちないとすみません。 最近アップグレード後、本体1台分の部品が残っていたので、サブシステムのケースを直接作ってみようと思った、該当映像を見ました。 あなたの作品は私が個人的に考えたものと最も似た吸気排気構造を持っています。 考えただけを実際の映像で見ては大きな勇気を得ました。 もう実際に実行に移さなければなりませんが。 目の前が暗い。😂
@Diy-lv4ps
3 ай бұрын
ご視聴ありがとうございます。私の作品があなたの創作意欲に繋がったになら嬉しいです😀
very nice, well done!
Greetings from Mexico, great work!
Nice, good job!
These is so cool! Wow. I hope you can share a blueprint next time so we can try it too.
逸品!
Beautiful.
Nice one, inspired on the FT03 from Silverstone I believe.
FT02使うほど上部排気好きなのでめっちゃ素晴らしいと思いました。これに近いmicroATXのケース欲しいです。。
Mini ITXだったらこういうケース結構あるけど、M-ATXには全くないよね ガチで企業に発注して量産して欲しい 絶対買うじゃんこんなの あとマザボが同じで親近感湧いた
天井の開閉のセンスが凄すぎ DIYではなく、商品レベルだと思いました
Hermosa! Muy buen trabajo!!!
Wow, great craftsmanship ! What's the thermal performance of this ? Could be better if you have more ventilator holes on the panels ?
I like your smart case.
@Diy-lv4ps
Жыл бұрын
thank you. Compact design with no wasted space.
事業化してください、才能を世に
Very cool!!!
再生して1秒で、以前に塩ビ管でPCケース作った人かと思ったが、やっぱりそうだった。
Nice job.
すごいプロに懸かればカッコイイPCケースなどお手の物って感じですね!
@Diy-lv4ps
3 жыл бұрын
ご視聴、コメントありがとうございます。 ・・・プロではないですけどね。
You're doing a great job! 😃
Artwork !
いくらなら代理製作してもいいって考えますか?ww 白色で同じもの欲しい!!ww 製作おつかれさまでした! 感動しましたー!!
the layout looks like NZXT H1.. good worklog
Muy bueno!!! Hi from Argentina!!!! my friend!
excelente trabajo genial
すごすぎ
awesome
Excellent build, I can see you marketing the chassis, if you have such a mind, I would buy one, panels could be sold with and without to suit.
Nice build can you put all dimension, driling holes shematics drawing?
やっぱり自作って良いですね~ めちゃくちゃ良いの出来たじゃないですかぁ 個人的な意見言うとAsrock使うならメカメカしいのが良かったかなぁ? って事ぐらいですね~ いや、本当に図面まで引いて本格的で格好良いですよ。
👍 great work
@Diy-lv4ps
Жыл бұрын
Thank you for watching.
very nice,thanks for share !!!!!!!!!!!!!!!!!
アクリサンデーはダイソーとかのメイク用品コーナーに売っている注射器を使うと勝手に垂れずにキレイに出来ますよ!
@Diy-lv4ps
4 жыл бұрын
ダイソーとかで注射器買えるんですね。探してみます。 あのスポイドは体温で勝手に液が噴き出したりして使いにくいんですよ。 貴重な情報ありがとうございます。
This is amazing!
@Diy-lv4ps
Жыл бұрын
Thank you for watching and commenting.
This make me want to build another case
これぞ「自作パソコン」ですよね!すばらしい!! プラモを自作と言いますか?プラモデルより遥かに簡単なものを「自作」とか言っちゃうのは未だに抵抗がある者ですw
Классный корпус получился!
so gooddd
very nice cabinet from india
Exelent can u do the same with Old dreamces case ? thanks :)
Perfect !
@Diy-lv4ps
6 ай бұрын
thank you very much.
お気軽にコメントください。 Feel free to comment.
え、完成度高すぎステキ✨ 私もケース製作始めたんですが、このクオリティには辿り着けないわぁ(*´﹃`*)
@sakamod
Жыл бұрын
本物
Great job!
@Diy-lv4ps
2 жыл бұрын
Thank you for watching and commenting.
@starkomega4027
Жыл бұрын
@@Diy-lv4ps Is the project available?
So Inspiring
@Diy-lv4ps
Жыл бұрын
Thank you for watching.
Классно))) Приятно смотреть)))
very good
@Diy-lv4ps
2 жыл бұрын
Thank you for watching and commenting.
Amazing you can sell this case, worth suggested video by KZread Edit: can you attach the design
欲しい!
How much aluminum angle you need for build this case & dimensions?
I call this "Art"
Man... I gonna try this on my new ryzen setup...
Excelent!!$
amazing
@Diy-lv4ps
2 жыл бұрын
Thank you for watching.
이거 마음에 든다...굿
設計から作成まですごいと思うけど気になるのが、電源にHDD隣接して大丈夫なの?
I love your work too! I want start to build my own pc cases, and you inspired me! Thank you! If you can help me with some documents of measurements or projects, I would appreciate it so much! 😁 How can I contact you in person?
今自作PCにはまっています。動画見た途端、販売さてていればすぐ買いたいと思った。実に素晴らしい。自分でも作りたい。JWWCADの図面手に入りませんか?
おぉすごいw電源とアクセスランプのところが地味にいいね。 ただメンテの時とかにアクリルの脱着が指紋やら持つところやらで面倒そう・・・いや寝かせればいいのか? おせっかいかもしれませんが、回転する工具を使うときに軍手はダメ絶対。ケガじゃ済まないですからね・・・
他の自作ケースより格段に出来が良いと思いました。(小並感)
the best content step by step showed in this video i think u need to slap a sticker (Apple logo)
サーマルテークのミニ版ですね。本家は、大きくかなりの重量級です。
Very good video, do you have the measurements to assemble? I do mine :D (I'm using the translator xd)
please make a exp gdc case video
個人的には前の円柱のケースのほうが好きかな
VERY VERY GOOD 😍
@Diy-lv4ps
3 жыл бұрын
Thank you for watching and commenting.
Do you have the exact measurements in any documents ? I want to build this too please.
Abeeも星野金属もなくなった時代に再度made in japan のPCケースが産まれそう。 これは個人的な希望ですが、部材に天然木も使用して欲しい。
te quedo chido wey
凄すぎて、笑う 機械系cad使える&作れる人憧れますが、絶対自分には無理だと感じちゃいます。
@Diy-lv4ps
2 жыл бұрын
ご視聴、コメントありがとうございます。
@2w986
2 жыл бұрын
@@Diy-lv4ps わざわざご返信ありがとうございます! 大変クオリティの高い作品で 感謝感謝です 最近海外の机の引き出しにPCを組み込む動画など、ユニークなPCケース動画あさるのが日課で、 このチャンネルにあえてうれしいです。 長文失礼しました!
@Diy-lv4ps
2 жыл бұрын
@@2w986ありがとうございます。 最新の作品では簡易水冷対応させた物もアップしています。 よかったら観てください。
Cool work but hell he huge =_= Its bigger and thicker than midi tower case 0_o
Can you share the project with us please?
一応CADは使えるけど図面引くのがなぁw。これうってたら普通に買うわw.組み立てキットでもいいw
お疲れ様です! また凄いの出来上がりましたね( ☆∀☆) 一ヶ所一ヶ所物凄い拘りを感じます! こんな技術が自分にも欲しいです… ぶっちちさんは本当にすごい。
@Diy-lv4ps
4 жыл бұрын
いつもありがとうございます🎵 そんなことないですよ TKMS さんこそすごいですよ‼️
@rev.pccasebuilder
4 жыл бұрын
自分のは機械が勝手にやってくれるけど ぶっちちさんのは本当に器用でないとできないことです! 尊敬します(〃⌒ー⌒〃)ゞ
Good job! Sorry for arrogance, can you share the drawing? I have an Asus x99-m ws. I would like to collect something like that. Thank you for the attention.