What software was used to play your music? Beautiful work man. A masterpiece
@davidwade7053
4 жыл бұрын
etouch Jukebox, good quality and fair price
@bryanrobin2952
4 жыл бұрын
David Wade thank you
@DanielAspesi Жыл бұрын
This is awesome. I have a few questions for you. How did you bend and adhere the small strips along the front? I see you just spacers to make sure they're all perfectly straight, but once you removed those, what kept the strips in place? Also, I see you used high pressure plastic tubes for the tube effect. How did you bend these and get them into place?
@RobertLevy4321
7 ай бұрын
Hi Dave I love how you did your Juke Box. I am in the process of building one. I would like to know exactly what type of light tubing you used, where did you find it at. I read that it's high pressure tubing ,but is it lexan , acrylic ,nylon ?????
@bryanpayne92953 жыл бұрын
Any chance you could post some plans
@careersunlimitergv4 жыл бұрын
Hi David, great project. Can you share the specs on the elctronic components or diagram. Your help is appreciated.
@davidwade7053
4 жыл бұрын
Old core 2 duo PC, used point of sale touch screen monitor, got both for cheep on ebay. software was e-touch jukebox 10.1.8 buttons were wired with a zero delay USB joystick controller and joytokey software . i got the main LED strips from superlightingled, had to get a multiplexer for 3 strips and the controller is very cheep. Dome light was disco light purchased on ebay.
@davidwade7053
4 жыл бұрын
kzread.info/dash/bejne/dICLw7htYritedo.html one of my other videos showing the complete jukebox
@jorgetucson81963 жыл бұрын
I'm loving the music. Can you please tell me who did the cover Thanks!
@davidwade7053
3 жыл бұрын
It is from one of the Vintage Cafe albums
@honeyko74224 жыл бұрын
Just found your build video. Great. I'm guessing you used simple plastic waste pipes for the light tubes? Did you cut them in half or mount full? How did you get them to bend?
@davidwade7053
4 жыл бұрын
They are high pressure plastic tubes they are very hard and hard to bend
@riksworld1
3 жыл бұрын
@@davidwade7053 hi, what size pipe did you use?
@davidwade7053
3 жыл бұрын
@@riksworld1 i think they are 1.25 inch
@robertboring40704 жыл бұрын
Well done. Like the tubes lighting. Did you have any issues getting strip lighting orientation stay put ? 👍
@davidwade7053
4 жыл бұрын
Used clear vinyl tubing inside the hard white plastic tubing to hold the led strips in place
@robertboring4070
4 жыл бұрын
Cool. I’ll have try that if I ever have to replace a led strip in my tubes. I spent hours trying to get led strip aligned right. Thanks for the idea and nice build again
@davidwade7053
4 жыл бұрын
dude i just realized you were the inspiration for what i built. Your jukebox is AWESOME
@robertboring4070
4 жыл бұрын
Glad I could inspire you. Also like your VM Pinball. I may have to build one myself. Looks interesting
@whatthemerch4 жыл бұрын
This is awesome. How did you make the lights look so amazing?
@davidwade7053
4 жыл бұрын
i got the main LED strips from superlightingled, had to get a multiplexer for 3 strips and the controller is very cheep. Dome light was disco light purchased on ebay.
@beardiebeardie4 жыл бұрын
Hi David. How exactly did you bend the plastic for the lights. I am building similar are am up to this stage and been told it is very hard. Did you stuff something inside and use a heat gun?
@davidwade7053
4 жыл бұрын
Yes it is had to bend, but you can see it is in sections. I used a saw to make the cut amd a grinder to fine tune the angles on each end. If it needed ro ne forced into place i used c clamps and used clear silicone seleant/adhesive to keep it in place. It is difficult to work with but not imposaible. Have patience use the geinder to cut excess and clamps to do the hard work.
@beardiebeardie
4 жыл бұрын
@@davidwade7053 Thanks for answering
@kevincarmon98064 жыл бұрын
hi david have you got info for raspberry pi to use on jukeboxthanks david
@davidwade7053
4 жыл бұрын
I'm sorry, no, I went the PC route with windows 7 and etouch jukebox software
Пікірлер: 28
Good job 👌👍
What software was used to play your music? Beautiful work man. A masterpiece
@davidwade7053
4 жыл бұрын
etouch Jukebox, good quality and fair price
@bryanrobin2952
4 жыл бұрын
David Wade thank you
This is awesome. I have a few questions for you. How did you bend and adhere the small strips along the front? I see you just spacers to make sure they're all perfectly straight, but once you removed those, what kept the strips in place? Also, I see you used high pressure plastic tubes for the tube effect. How did you bend these and get them into place?
@RobertLevy4321
7 ай бұрын
Hi Dave I love how you did your Juke Box. I am in the process of building one. I would like to know exactly what type of light tubing you used, where did you find it at. I read that it's high pressure tubing ,but is it lexan , acrylic ,nylon ?????
Any chance you could post some plans
Hi David, great project. Can you share the specs on the elctronic components or diagram. Your help is appreciated.
@davidwade7053
4 жыл бұрын
Old core 2 duo PC, used point of sale touch screen monitor, got both for cheep on ebay. software was e-touch jukebox 10.1.8 buttons were wired with a zero delay USB joystick controller and joytokey software . i got the main LED strips from superlightingled, had to get a multiplexer for 3 strips and the controller is very cheep. Dome light was disco light purchased on ebay.
@davidwade7053
4 жыл бұрын
kzread.info/dash/bejne/dICLw7htYritedo.html one of my other videos showing the complete jukebox
I'm loving the music. Can you please tell me who did the cover Thanks!
@davidwade7053
3 жыл бұрын
It is from one of the Vintage Cafe albums
Just found your build video. Great. I'm guessing you used simple plastic waste pipes for the light tubes? Did you cut them in half or mount full? How did you get them to bend?
@davidwade7053
4 жыл бұрын
They are high pressure plastic tubes they are very hard and hard to bend
@riksworld1
3 жыл бұрын
@@davidwade7053 hi, what size pipe did you use?
@davidwade7053
3 жыл бұрын
@@riksworld1 i think they are 1.25 inch
Well done. Like the tubes lighting. Did you have any issues getting strip lighting orientation stay put ? 👍
@davidwade7053
4 жыл бұрын
Used clear vinyl tubing inside the hard white plastic tubing to hold the led strips in place
@robertboring4070
4 жыл бұрын
Cool. I’ll have try that if I ever have to replace a led strip in my tubes. I spent hours trying to get led strip aligned right. Thanks for the idea and nice build again
@davidwade7053
4 жыл бұрын
dude i just realized you were the inspiration for what i built. Your jukebox is AWESOME
@robertboring4070
4 жыл бұрын
Glad I could inspire you. Also like your VM Pinball. I may have to build one myself. Looks interesting
This is awesome. How did you make the lights look so amazing?
@davidwade7053
4 жыл бұрын
i got the main LED strips from superlightingled, had to get a multiplexer for 3 strips and the controller is very cheep. Dome light was disco light purchased on ebay.
Hi David. How exactly did you bend the plastic for the lights. I am building similar are am up to this stage and been told it is very hard. Did you stuff something inside and use a heat gun?
@davidwade7053
4 жыл бұрын
Yes it is had to bend, but you can see it is in sections. I used a saw to make the cut amd a grinder to fine tune the angles on each end. If it needed ro ne forced into place i used c clamps and used clear silicone seleant/adhesive to keep it in place. It is difficult to work with but not imposaible. Have patience use the geinder to cut excess and clamps to do the hard work.
@beardiebeardie
4 жыл бұрын
@@davidwade7053 Thanks for answering
hi david have you got info for raspberry pi to use on jukeboxthanks david
@davidwade7053
4 жыл бұрын
I'm sorry, no, I went the PC route with windows 7 and etouch jukebox software