Homemade DIY Labeling Machine for bottles
Ғылым және технология
The machine works with paper on which the glue has already been applied, so you only have to get them wet with a little water to make the sticky. I think the right translation is "dull gum", in german it is "trockengummiert". You can buy this kind of paper in all kind of variations. I print them at home with a laser printer and cut them myself. This allows me to use the machine even if I only bottle very few bottles with lots of different labels.
The colored roller is running in water and wets the labels. The roller above it pushed down and "removes" the water which is to much.
The transparent parts are made out of polycarbonate, all rolles run on ball bearings.
The papaper-pickup roller only runs for an adjustable time (time relais from ebay), this time has to be adjusted to the length of the label.
The roller all the way in the front can be placed in different positions, it is not motor-driven. This allow to adjust the machine in order to label bottles up to 15cm in diameter. However, the minimum width of a labe for a 6cm bottle ist about 3-4cm, for a 15cm bottle it is about 10cm. I need to do further tests.
I built the machine at my home with no access to a decent shop, you can do it too. I hope so of you might find this interesting enought to re-build it .
Further information in german:
hobbybrauer.de/forum/viewtopic...
Further information in english:
www.homebrewtalk.com/showthrea...
The first prototype:
• DIY Wet-Labeling-Machi...
The second prototype:
• DIY Wet-Labeling-Machi...
The homepage of my home-brewery:
www.chicco.beer
Пікірлер: 74
Well done, great work
this design looks better than some machines already out here you should market this
love it, are you planning to release some sort of plans? love to bay them, need one of these! great work!
Wonderful Genius.. btw ws the 100th to like ur video !! Grt work enjoyed it.. 😆😆
@chixxxxi
7 жыл бұрын
Thank you!
Thank you for nicest idea.. i ll try to make one for myself...
Good morning. Im trying to rebuild the machine. What is the type of the roller that you are using?
U are so creative..
This is great!
From where did you bought the rubber rollers?
How did it go with the plans? Are they finished?
Hello it’s a cool idea. Can we apply this concept for pouches ?
Amazing!
Hi I am looking to make a labeler for our product of Masala on glass jar/bottle. Can you share your design so that I should like to make one.
Wonderful Genius
Which motor did you use for it? Thanks
Hi, wie stellst du sicher dass immer nur ein Label eingezogen wird?
can i get its drawing or a video how to made it?
Hi Wery nice machine. How many RPM does each of the 2 gear-moters have as output? And how many teeth does the belt wheels have?
Where i may buy it?How much?Please!!!
Really cool !!!!! where do you fing the white roller??? I'm looking to make one since couple of time and i couldn't find that kind of roller! :-) Good Job!
@chixxxxi
8 жыл бұрын
+Xavier Munger This are the rollers which are used to apply paper hangings to walls (dict.leo.org/ende/index_de.html#/search=tapeten&searchLoc=0&resultOrder=basic&multiwordShowSingle=on).
@martinweiss87
8 жыл бұрын
+ggo85 If I may jump in with some translation help: these rollers are used to apply the glue to wallpaper.
Hey there! Just wanted to ask you which is the material in which the rollers are made of? Are they made out of nylon or any other polymer? What about the furry surface of the pink roller that distributes the water to the label? Thank you very much and congratulations for the machine, it's really amazing!
@chixxxxi
8 жыл бұрын
+chisme92 I don't know exaclty to be honest. Some kind of soft foamy plastic, but I don't think it matters very much. The pink one is for painting...
@user-ih5pm4hz8o
Жыл бұрын
Zzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz
what kind of stickers are those?
How did you cut the polycarbonate sheets? What thickness were they?
@chixxxxi
8 жыл бұрын
The sides are 5mm if I remember correctly. Some parts, like the tray, are made out of an old front window from a police car. So it is partly bullet proof ;-) Polycarbonate is very very easy to work with. I just used my metall and wood saws an drills. Just don't go to fast cause it will melt. You might as well use wood or metall. The main reason I chose this material is so that you all can see how it works. But I started to love it!
@bookshelf2863
8 жыл бұрын
Great job! The machine looks amazing!
I can't spend more money for our bottle labeling.. Can you share the design
HAVE A DOUBT HOW CUM THE WHITE ROLLER NOT GETTING WET AND IF ITS GETTING WET IT WILL ALSO WET THE PAPER TOP SIDE..CAN U PLEASE EXPLAIN
Wunderful! Exactly what we Need but how can i build this- can you provide me some plans ? i like to rebuild it! what are the material cost?or do you produce it and would sell it to mee?
@magor85
7 жыл бұрын
BTW i live in switzerland - may you like to contact me - info@tiboris.ch
@kit6580
7 жыл бұрын
Me too. We might help him to draw it...
@TheEricDau
2 жыл бұрын
please contact me
Would you sell one ?
Great
the glue under absorb roll( pinky roll) ?
@craiggambetta694
4 жыл бұрын
No, that is plain water, the stickers slready have an adhesive that reacts to the water to make them stick to the bottle
Please advice, if you going to buy this machine , what's the price? i might be need around 20 pieces
@chixxxxi
7 жыл бұрын
sorry, we can not produce the machine for selling it.
@TheEricDau
2 жыл бұрын
please contact me
How much cost
how to order
I want this type of machine Can you send me design ya any videos
Smart you
How much?
Gdzie kupić
Price?
Greetings please we could talk by email to know the price and if you can send the machine to Colombia my country
@TheEricDau
2 жыл бұрын
please contact me
thanks for the prompt reply. ..you have made this for your ownself...you have done a great job..I think you can money out of this idea. why don't you patent it..then no one can copy it ... I have not seen this type of machine anywhere else. ..if you are going to make the drawing then can you share it??? ...will you give other people chance to manufacture it???
@chixxxxi
7 жыл бұрын
There is basically no real invention on this machine which could be made into a patent. Here in Switzerland I can not produce this machine for a reasonable price. I will share the drawings once finished, however, I don't know when this will actually be. I am trying to redesign it so that almost all of the parts can be 3D printed.
@zohaib80
7 жыл бұрын
ggo85 ....I understand your concern. ...I am in Malaysia. ...it can be cost effective here...if you want we can try to work together on this project...this can give you competitive edge...cheers
@chixxxxi
7 жыл бұрын
I will post here once the plans are finished, then this might be an interesting option. But as I already said, I can not promise a date when this will be done. Also, feel free to copy the machine, even if you go in production with the design I would have no problem with that.
@zohaib80
7 жыл бұрын
Hey thanks alot...waiting anxiously for your plan.....thanks again...Cheers...Regards
@thanhhuynh1080
7 жыл бұрын
Syed Muhammad Zohaib Sabri
I want to buy it I am from Delhi India
@TheEricDau
2 жыл бұрын
please contact me
hy, doyou have any plan for your machine please?
@chixxxxi
8 жыл бұрын
sorry, no plans so far...
Hi ggo85....Wow....I am really impressed....I want to start my own small business and my budget is really tight.I have been looking for a simple labelling machine...Do you have an email address??? How can i get in touch with you???I am really looking forward to converse with you....Cheers.
@chixxxxi
7 жыл бұрын
www.chicco.beer. However, the machine is not beeing sold currently and there are actually no plans to do so. I am working on drawings, but I am far from beeing finished...
DEAR FRIEND, I MAY HAVE PLEASURE TO GET MACHINE SKETCH THANKING YOU NARESH JOSHI