Homemade Aluminum Boat - Jack Daddy Customs - Part 4
Автокөліктер мен көлік құралдары
Got a lot more done on the jack attack skiff. its ready for painting.
#Jackdaddycustoms #diy #diyprojects #homemade #outdoors #duckboat #fabrication #miller #welding #fishing #mudboat #marsh #outboard #blackoakled #blackoak #nilight
Пікірлер: 51
I will have to say that you built a super sweet boat. You have inspired me to build my own. I like the idea of building it the way you want it and have the opportunity to build it the way you want it. It there a certain place you got certain items for the boat, like the outside top railing and the decorative inside bump railing.
@JackArmstrong-jackdaddycustoms
Ай бұрын
Thanks. That’s awesome. I got most of my metal from pierce aluminum. They have a couple locations across the southeast.
I’m pumped to see the finished product!
@JackArmstrong-jackdaddycustoms
Жыл бұрын
me too!
I love that you have your son out there with you. My only concern is his health. If I could suggest, if you have time, please read an MSDS on aluminum. I contracted leukemia from welding on these alloys. Wear a respirator when grinding and welding aluminum.
@landonlarocque4723
Жыл бұрын
msdsdigital.com/system/files/AlcoTec_SDS_5356.pdf
@JackArmstrong-jackdaddycustoms
Жыл бұрын
thats a good idea, thank you.
Looking good jack daddy!!
@JackArmstrong-jackdaddycustoms
Жыл бұрын
appreciate it forrest
So cool
@JackArmstrong-jackdaddycustoms
Жыл бұрын
thank you
a master at his craft... this was fun to watch.
@JackArmstrong-jackdaddycustoms
10 ай бұрын
Haha. Glad you enjoyed it.
Nice job
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Thank you.
Jack nice
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Thank you
I love what you do
@JackArmstrong-jackdaddycustoms
Жыл бұрын
thanks
Your pipe bending skill is off the charts man!
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Lol. I appreciate it man. I’ve bent a lot of pipes and tubes over the years. You must be binge watching the whole thing. Appreciate it
Man that’s a sharp looking hull. When you bought the hull with the sides already done, how did you order it prefabbed?
@JackArmstrong-jackdaddycustoms
4 ай бұрын
Thank you. Ordered a 1756 with rounded sides at the back with a flare at the top like a havoc.
Great series! Do you have a vid about your homemade brake?
@JackArmstrong-jackdaddycustoms
Жыл бұрын
I didn’t make a video on it because there are a ton of them out there. It’s really no different than any of them. Maybe just a little beefier than some others.
Your interpretation is good
@JackArmstrong-jackdaddycustoms
Жыл бұрын
thanks
You would think you did this for a living with how professional this boat is turning out.
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Just spare time brother. Appreciate the compliment. We’ll see how professional we are at busting the ducks out of it.
enjoying the vids man where in Alabama you at?
@JackArmstrong-jackdaddycustoms
Жыл бұрын
South central near andalusia
Looks great brother. She should fly.
@JackArmstrong-jackdaddycustoms
Жыл бұрын
As long as she stays in the water and right side up I think we can get to the hole first.
Boat looks good but Willy must get his dance moves from you 😂😆
@JackArmstrong-jackdaddycustoms
Жыл бұрын
He was killin it
What size angle did you use on the bottom?
@JackArmstrong-jackdaddycustoms
Жыл бұрын
1 inch for the strakes or whatever you want to call them. They can bend them into the hull if you want them to. I think I would get them to do that the next time if I did it again.
Where in Louisiana can you not hunt with a surface drive
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Biloxi wma. Launch out of hopedale. Surface drive would be a game changer.
Am eddy in Uganda I like it
@JackArmstrong-jackdaddycustoms
Жыл бұрын
Awesome. Thanks for watching. Have spent some time in Africa but never Uganda. Would love to see it one day.
How much does sheet of aluminum costs
@JackArmstrong-jackdaddycustoms
Жыл бұрын
It all depends on what size and alloy you get. They come in all different thicknesses and lengths. 4x8 5x10 8x20 are common sizes with considerable price differences.
How much was the aluminum kit from pierce?
@JackArmstrong-jackdaddycustoms
5 ай бұрын
They don’t sell a kit. You just have to call and order what you need. The cost will vary depending on how much aluminum you order. To my knowledge you can’t just ask for a kit and they send you everything. BUT, frank at the Broussard location is a gem to work with and he can set you up with exactly what you need.
@stevencarterbjj
5 ай бұрын
@@JackArmstrong-jackdaddycustoms yea I’m just trying to get a rough estimate to build a similar hull like yours
@JackArmstrong-jackdaddycustoms
5 ай бұрын
@@stevencarterbjj plan for between 6-10 depending on how intense you want it to be for just the metal. Don’t forget all the consumables and little things like latches and hinges add up pretty quick. Good luck with your build, it’s way better than buying one!
@stevencarterbjj
5 ай бұрын
@@JackArmstrong-jackdaddycustoms dang aluminum has gone crazy! I remember 8 years ago I looked into building a 2072 hull and it was 3500$ lol
@JackArmstrong-jackdaddycustoms
5 ай бұрын
@@stevencarterbjj yep. It went up a lot during Covid and hasn’t really rebounded much.
In Uganda I lack material
@JackArmstrong-jackdaddycustoms
Жыл бұрын
you might could do something similar with wood and fiberglass?