Demonstration on how to change the string on the Homelite Weed Eater the EASY way! Save yourself the frustration...do it the easy way
Жүктеу.....
Пікірлер: 51
@astateato Жыл бұрын
Thank you! I am not mechanically inclined and after years of knowing I wasn't doing it right I found this. Subscribed.
@jessicaweaver672810 ай бұрын
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. kzread.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
@MrAmigo22253 жыл бұрын
You sometimes have to refill the spool two or three times depending on the size of the lawn and you're tired. This video makes the process simple
@allenmarold24944 жыл бұрын
Best video lesson ever on a too-many-years problem. Thank you and thanks, again. 🤓👏👍
@chevelljoh1209743 жыл бұрын
Thank you. I had no idea what. I was doing your video helped me lean
@horacelee8805 жыл бұрын
FYI : VERY IMPORTANT: Homelite weed Eaters come in two thread models. Red knob & Black knob.The Black knob model is your regular Righty Tighty Lefty Loosy screw pattern to take it off & on, but The Red knob model has a reverse thread screw pattern to take it off & on. Great Video ! Very simplictic!
@rstryke3
4 жыл бұрын
You are rigth, this is very important, the black knob is counter clockwise to unscrew.
@simonegodwin7449
3 жыл бұрын
Ours won't unscrew.... eirher way
@westsenkovec
2 ай бұрын
No, no, no.. The screw is just extra tight. It needs more force.
@wrestlingchitchat71625 жыл бұрын
you are the freaking man! Thank you so much
@gamingsquadsalazar38855 жыл бұрын
Simple. To the point. Love it!!
@kindway37794 жыл бұрын
Game changer. Thanks bro.
@ladansari2 жыл бұрын
Greatly appreciated
@danmartinez99902 жыл бұрын
Gracias!!! fue muy útil para este video.
@jaceellington1819 Жыл бұрын
Thank u man very descriptive
@Miketroyal11 ай бұрын
hello thank you very much it helped me a lot regards be well
@jaceellington1819 Жыл бұрын
Good job I appreciate you
@joseosorio5170 Жыл бұрын
Excellent...👍
@liltcup765 жыл бұрын
This was simple. I didn't tighten the red cap back on before I tried to role the threading back into place.
@doityourselfeasy8226
5 жыл бұрын
liltcup76 glad it was helpful!
@donmickelinc8025 Жыл бұрын
I have a harbor freight and I am really having trouble restricting it. Am going to the garage and give it another go.
@JuanRodriguez-hq1wx3 жыл бұрын
Gracias amigo !! Thank you my friend !! Ggrrraciiasss amigoouuu !!
@55damian5 жыл бұрын
Don't tell nobody but, Thanks!!!!
@doityourselfeasy8226
5 жыл бұрын
You're welcome!
@alejandromillan3620 Жыл бұрын
Gracias buena información
@aldogarza21793 ай бұрын
Yo make it simple and direct. Love those kind of vids without unnecessary blablabla.
@missmelly6173 Жыл бұрын
Whoo hoo! I’ve never owned one before and recently bought this one second hand with no instructions....
@sybaby5 жыл бұрын
I've been doing it all wrong! Thank you
@doityourselfeasy8226
5 жыл бұрын
You're welcome glad it helped!
@giovanimolina3348
5 жыл бұрын
Same thank you
@russellthompson87933 жыл бұрын
No need to disassemble. Just line the arrows up on the bottom of the head. Shove the line through and start winding it up
@fronkmonk2 жыл бұрын
Our weed whacker didn't come with the red cap. I know this is an older video but if you read this can you tell me what the part number is for? Ours is a 26cs I believe. Frustrating not being able to use it
@bobbobiv4 жыл бұрын
Thank you. Directions with the unit were terrible. 5 mins after this I was back to eating weeds.
@joemusicman642 жыл бұрын
I use a thicker gauge string than is recommended (0.095" vs 0.080") because it lasts longer. But I do have to take the head off and spray some lube in the hole to get the string through it. This is a great video. The guy being left handed is a little weird to watch.
@revdav15734 жыл бұрын
How do you keed the string from going back into the spool? The string keeps going back in on mine.
@joemusicman64
2 жыл бұрын
You probably wound it up backwards but you likely figured this out a year ago. 😂
@joeyh8123 жыл бұрын
Ayo Legit thank you so much bro I couldn’t refill that shit until I saw this video. I don’t know why but I always have problems refilling welders with string :)
@joesk88211 ай бұрын
Tengo este mismo modelo disculpe que calibre lleva el hilo, y también la bujía que marca lleva
@joesk88211 ай бұрын
Cuánto Metro mide el hilo para este modelo? Ya que compre un rollo grande y no se cuánto le entre al carrete?
@beccarakin634011 ай бұрын
I got the red part off but the next piece will NOT pop off, even tried prying with a screw driver. I dnt wana break it ...
@ramiroaemlbeltranmata2283 Жыл бұрын
How do l fix My weed eater's loose head please
@brianmurray89193 жыл бұрын
Why is the bolt staying in place when I'm trying to turn the red cap clockwise it just wont turn I'm getting so annoyed right now lol
@JGG17013 жыл бұрын
Well I'll be derned. Thanks
@victor67215 жыл бұрын
You don't even have to remove the cap, just spin the spool so the arrows on top line up with the holes, then you just push the string all the way through.
@homero7296 Жыл бұрын
Se despegó la laminita de la rosca roja que quita primero del cabezal. Que solución se puede hacer?
Пікірлер: 51
Thank you! I am not mechanically inclined and after years of knowing I wasn't doing it right I found this. Subscribed.
For the last 18 months I've not let the lawn crew edge or use a weed eater in my back yard. kzread.infoUgkx_rBCFuDW1zD6blTGhLkvAkxU657uR_lG I didn't like the fact that they just kept cutting the edge of the lawn further and further from the rock lining the flower beds and leaving bare ground. And the grass was trimmed or scalped several feet around trees, etc. It was a constant battle with them so I told them to just mow and no trimming. I have Zoysia grass so it grows pretty slow. Obviously after a while it could use some trimming. I'm in my 80's so I can't do much of it myself.Finally I decided that if I could find a lightweight battery powered trimmer I might be able to do some light trimming. I decided to buy the LST201 20V trimmer. And it works great for my needs. I have back yard with about 150' of flower beds and several trees to be trimmed. I can lightly trim the whole yard with a single charge! The grass I trimmed was only a few inches high but the trimmer was more powerful than I expected.
You sometimes have to refill the spool two or three times depending on the size of the lawn and you're tired. This video makes the process simple
Best video lesson ever on a too-many-years problem. Thank you and thanks, again. 🤓👏👍
Thank you. I had no idea what. I was doing your video helped me lean
FYI : VERY IMPORTANT: Homelite weed Eaters come in two thread models. Red knob & Black knob.The Black knob model is your regular Righty Tighty Lefty Loosy screw pattern to take it off & on, but The Red knob model has a reverse thread screw pattern to take it off & on. Great Video ! Very simplictic!
@rstryke3
4 жыл бұрын
You are rigth, this is very important, the black knob is counter clockwise to unscrew.
@simonegodwin7449
3 жыл бұрын
Ours won't unscrew.... eirher way
@westsenkovec
2 ай бұрын
No, no, no.. The screw is just extra tight. It needs more force.
you are the freaking man! Thank you so much
Simple. To the point. Love it!!
Game changer. Thanks bro.
Greatly appreciated
Gracias!!! fue muy útil para este video.
Thank u man very descriptive
hello thank you very much it helped me a lot regards be well
Good job I appreciate you
Excellent...👍
This was simple. I didn't tighten the red cap back on before I tried to role the threading back into place.
@doityourselfeasy8226
5 жыл бұрын
liltcup76 glad it was helpful!
I have a harbor freight and I am really having trouble restricting it. Am going to the garage and give it another go.
Gracias amigo !! Thank you my friend !! Ggrrraciiasss amigoouuu !!
Don't tell nobody but, Thanks!!!!
@doityourselfeasy8226
5 жыл бұрын
You're welcome!
Gracias buena información
Yo make it simple and direct. Love those kind of vids without unnecessary blablabla.
Whoo hoo! I’ve never owned one before and recently bought this one second hand with no instructions....
I've been doing it all wrong! Thank you
@doityourselfeasy8226
5 жыл бұрын
You're welcome glad it helped!
@giovanimolina3348
5 жыл бұрын
Same thank you
No need to disassemble. Just line the arrows up on the bottom of the head. Shove the line through and start winding it up
Our weed whacker didn't come with the red cap. I know this is an older video but if you read this can you tell me what the part number is for? Ours is a 26cs I believe. Frustrating not being able to use it
Thank you. Directions with the unit were terrible. 5 mins after this I was back to eating weeds.
I use a thicker gauge string than is recommended (0.095" vs 0.080") because it lasts longer. But I do have to take the head off and spray some lube in the hole to get the string through it. This is a great video. The guy being left handed is a little weird to watch.
How do you keed the string from going back into the spool? The string keeps going back in on mine.
@joemusicman64
2 жыл бұрын
You probably wound it up backwards but you likely figured this out a year ago. 😂
Ayo Legit thank you so much bro I couldn’t refill that shit until I saw this video. I don’t know why but I always have problems refilling welders with string :)
Tengo este mismo modelo disculpe que calibre lleva el hilo, y también la bujía que marca lleva
Cuánto Metro mide el hilo para este modelo? Ya que compre un rollo grande y no se cuánto le entre al carrete?
I got the red part off but the next piece will NOT pop off, even tried prying with a screw driver. I dnt wana break it ...
How do l fix My weed eater's loose head please
Why is the bolt staying in place when I'm trying to turn the red cap clockwise it just wont turn I'm getting so annoyed right now lol
Well I'll be derned. Thanks
You don't even have to remove the cap, just spin the spool so the arrows on top line up with the holes, then you just push the string all the way through.
Se despegó la laminita de la rosca roja que quita primero del cabezal. Que solución se puede hacer?
@nostradamusxd868
Жыл бұрын
Comprala te la venden por separado
I can't get the red thing to come off the spool
Mine doesn't work like that.
Why does my weed eater has one hole
@lambchopLSX87
5 жыл бұрын
Tyron Zepol because that’s the way it was made
Cómo quitar el tapón rojito si está barrido el