Homeless Man Doses His Skyline | R33 RB25DE neo Ebay Turbo conversion

Автокөліктер мен көлік құралдары

Thanks for watching, I do apologize for the shaky and choppy camera and am working to create better footage, more content is on the way so stay tuned.
Turbo Line fitting sizes are:
Water feed and Drain | from Heater hoses - 3/4 to 3/8 barb Tee piece w/ -6 stainless hose to Banjo (unknown size, came with turbo)
Oil Feed | from oil pressure sensor - 1/8 BSP to 1/8 NPT Tee Piece w/ -4 stainless line to -4an to m12x1.25 banjo on the turbo
Oil Drain | -10an from turbo w/ -10 pushlock hose to a -10an to 3/4BSP fitting

Пікірлер: 14

  • @micahb5659
    @micahb56593 жыл бұрын

    Big support, I'm putting the same cheap turbo in my stagea as my stockie popped on me unexpectedly, they are pretty much good for 14 psi and no more lol

  • @jordanlux0252
    @jordanlux02523 жыл бұрын

    Sick one boiiii

  • @kyledookran4196
    @kyledookran41962 жыл бұрын

    Hey is the de neo faster than the det neo when turbo

  • @maxmcgregormedia9115
    @maxmcgregormedia91153 жыл бұрын

    Hey mate! Nice vid, what waste gate are you running?

  • @KindaRuined
    @KindaRuined5 ай бұрын

    any chance you know if the same parts will fit on the 20neo?

  • @chiquitagamer9633
    @chiquitagamer96333 жыл бұрын

    Do you have The seriel number For that oil pressure sensor with the line

  • @ka.powered8328
    @ka.powered83283 жыл бұрын

    So can I run this setup with my stock NA neo ecu?

  • @jackyg1237

    @jackyg1237

    3 жыл бұрын

    No can’t run it with a stock Na ecu, it’s cheap enough to get a second hand DET ecu. The Det ecu’s work off the det motor, the det motor has different compression ratios and different size cams so the timing is a different.

  • @ka.powered8328

    @ka.powered8328

    3 жыл бұрын

    @@jackyg1237 bit late but what about if I don't have access to a dey ecu? Can u run an apexi SAFC instead?

  • @mrmystery8484
    @mrmystery84843 жыл бұрын

    How long has it lasted any tips to make them last

  • @sbgarage2999

    @sbgarage2999

    3 жыл бұрын

    Hey man, she’s still running. It’s been my daily for a good few months. Just don’t turn up the boost too high without a tune, the N/A compression isn’t actually that much higher than the factory turbo variant, therefor it is more than capable of handling decent boost without problems.

  • @meatsauce8454

    @meatsauce8454

    3 жыл бұрын

    @@sbgarage2999 how much boost are u running bro ?

  • @antmck33
    @antmck333 жыл бұрын

    Has it blown up yet

  • @sbgarage2999

    @sbgarage2999

    3 жыл бұрын

    I’ve been running her at 10psi with the factory turbo ECU for a few months and haven’t had a problem. I’m in the process of installing a few more supporting mods and then it’s off to the dyno for a real tune. Should have some content coming soon based around that. Happy boosting ✌️

Келесі