Simple home made professional PCB using mini CNC 1500 mW laser engraver, etched by etching solution.
Жүктеу.....
Пікірлер: 22
@anderelectronics740Ай бұрын
I make my pcbs cutting by hand, I definitely need to build this cnc machine. Great idea.
@electronicsandinventions5919
Ай бұрын
You should!
@b139b4 ай бұрын
Thanks for your video. What Speed and Powersettings did you use for your 1,5W laser?
@electronicsandinventions5919
4 ай бұрын
Speed 80 , full power. It also depends on the thickness of the sticker laminating tape. it is better to try your setting on a small sample before starting your pcb. Maybe you need different settings. Best Regards
@petermuller6083 ай бұрын
Nice idea! Would have preferred having warnings with regards to the materials used. Some of those sheets contain materials which release quite nastiy fumes when laser cut
@electronicsandinventions5919
3 ай бұрын
Thank you for the note
@jmsian35056 ай бұрын
thank you for posting. what is the sticker made of?
@electronicsandinventions5919
5 ай бұрын
Normal self-adhesive laminating sheets
@andrericardobarbozapereira2 ай бұрын
Your video is super cool, I've always wanted to make plates like this, could you send me the project of your CNC laser or make a video of how you assembled it, the software you use and the program to convert the drawing into gcode?
@electronicsandinventions5919
2 ай бұрын
Thank you, The program used for drawing the circuit is PCB Wizard and the program used to change the drawing to G-code and to control the CNC is Benbox Laser Engraver. A homemade CNC video is on the list of future projects, and I will make a detailed video later on.
@MrMghobashi Жыл бұрын
الله ينور 👍🏻
@emanuelsales79792 ай бұрын
That's the way i do too
@valentinoagostinho70435 ай бұрын
👏👏👏👏👏🙆🏿♂️🙆🏿♂️🙆🏿♂️ So good
@electronicsandinventions5919
4 ай бұрын
Thank you
@victoriaPCB24 ай бұрын
👍
@stevepreskitt2834 ай бұрын
Great idea, but be absolutely sure the self-adhesive sheet isn't made from PVC or other chlorine-containing polymer. Laser cutting PVC and similar materials will release chlorine gas (which is not good for you), and also gaseous hydrochloric acid (which is not good for either you or the cutter). Even with sufficient venting, these by-products can be harmful to you and your equipment.
@electronicsandinventions5919
4 ай бұрын
Thank you for the notes
@TheMicroTrak
3 ай бұрын
They don't make these sheets out of granola and quinoa
@HK-uq9byАй бұрын
How much is the machine?
@electronicsandinventions5919
Ай бұрын
It's better to build the CNC by yourself, a new one, I think around 100~150 $
Пікірлер: 22
I make my pcbs cutting by hand, I definitely need to build this cnc machine. Great idea.
@electronicsandinventions5919
Ай бұрын
You should!
Thanks for your video. What Speed and Powersettings did you use for your 1,5W laser?
@electronicsandinventions5919
4 ай бұрын
Speed 80 , full power. It also depends on the thickness of the sticker laminating tape. it is better to try your setting on a small sample before starting your pcb. Maybe you need different settings. Best Regards
Nice idea! Would have preferred having warnings with regards to the materials used. Some of those sheets contain materials which release quite nastiy fumes when laser cut
@electronicsandinventions5919
3 ай бұрын
Thank you for the note
thank you for posting. what is the sticker made of?
@electronicsandinventions5919
5 ай бұрын
Normal self-adhesive laminating sheets
Your video is super cool, I've always wanted to make plates like this, could you send me the project of your CNC laser or make a video of how you assembled it, the software you use and the program to convert the drawing into gcode?
@electronicsandinventions5919
2 ай бұрын
Thank you, The program used for drawing the circuit is PCB Wizard and the program used to change the drawing to G-code and to control the CNC is Benbox Laser Engraver. A homemade CNC video is on the list of future projects, and I will make a detailed video later on.
الله ينور 👍🏻
That's the way i do too
👏👏👏👏👏🙆🏿♂️🙆🏿♂️🙆🏿♂️ So good
@electronicsandinventions5919
4 ай бұрын
Thank you
👍
Great idea, but be absolutely sure the self-adhesive sheet isn't made from PVC or other chlorine-containing polymer. Laser cutting PVC and similar materials will release chlorine gas (which is not good for you), and also gaseous hydrochloric acid (which is not good for either you or the cutter). Even with sufficient venting, these by-products can be harmful to you and your equipment.
@electronicsandinventions5919
4 ай бұрын
Thank you for the notes
@TheMicroTrak
3 ай бұрын
They don't make these sheets out of granola and quinoa
How much is the machine?
@electronicsandinventions5919
Ай бұрын
It's better to build the CNC by yourself, a new one, I think around 100~150 $
software pcb ?
@electronicsandinventions5919
3 ай бұрын
PCB Wizard