OFF THE CHAIN !!! You are one talented individual sir !!!

@MJADoingStuff

2 жыл бұрын

Thanks👍 Have a great weekend😁👍

Your grapple looks OEM 👍🏻, Original Equipment by Mitch 😉😂. Great job Mitch 👍🏻🙋🏼‍♂️🙂

@MJADoingStuff

2 жыл бұрын

That's funny Luc👍Good one!!!😁Thanks for checking out the video😁👍🚜💨💡🙋🏻‍♂

Hi man, that's a very nice grapple you have built great work, and tank you so much for sharing the measurements and details.👍

@MJADoingStuff

Жыл бұрын

Thanks 😁it’s a pretty simple design looks more complicated than it is. Have fun making it I am sure you can make it better😁👍🚜💨🍳

Looks better than store-bought Mitch. Thanks for showing those dimensions. Day safe and warm. Later

@MJADoingStuff

2 жыл бұрын

Thanks for checking out the video. It might be easier to just make it then go by my measurements 😂 have a great weekend😁👍🚜💨💡

Love the gray and orange. Looks awesome. Great idea Joe had with the grease nuts.

@MJADoingStuff

2 жыл бұрын

Thanks Case👍Joe is a Great Fabricator like you. Have a Great weekend 😁👍

@BuildALotAcres

2 жыл бұрын

@@MJADoingStuff Joe is a smart guy and is very talented for sure.

Awesome video Mitch !! I picked up on your channel during Ed's live chat this week. Seat of the pants engineering, just the way I like it !!

@MJADoingStuff

2 жыл бұрын

Thanks 👍 I try to use what I got and plans always change over night😂 thanks for checking out the channel😁👍🚜💨💡looks like I have already subscribe to your channel I will have to check out your videos😁

Man, that is still one of the coolest builds! I like seeing how you planned it out. 👍

@MJADoingStuff

2 жыл бұрын

Thanks Lucas👍I don't know if I can top this video😂these builds are a lot of work. thanks for leaving a great comment. Have a great weekend😁👍

Beautiful build, fit and finish Mitch! What's next?

@MJADoingStuff

2 жыл бұрын

Thanks David 👍Good Question I guess we will see😁👍🚜💡💨

Great Video as always with my kind of Humor 🤣 You have Special Skills for sure ! Thanks for sharing Phil PFON GBU

@MJADoingStuff

2 жыл бұрын

Thanks Phil 👍 I think I am going to have to buy my own frying pan for the garage😂 thanks for checking out the video. So what is GBU?

Nice measurements! I thought you were a Deadman walking outta the kitchen with the pan! Haha. Love it. Well done and looks perfect.

@MJADoingStuff

2 жыл бұрын

Thanks 👍 Ross Jamie hate’s it when I go in the kitchen cause she knows it not to cook anything 😂 👍🚜💨💡

@RossOnTheLand

2 жыл бұрын

@@MJADoingStuff well done sir.. well done hahah

I like the use of the frying pan, that is our type of engineering. I really like your design and the way you made this, thanks for sharing the details. Joe has some great ideas too

@MJADoingStuff

2 жыл бұрын

This was a fun project I think I might make some to sell In the future thanks for checking out the video 😁👍🚜💨💡

If I may make a suggestion....disassemble the unit, lay each piece on a sheet of graph paper and trace them out. That would allow easier identification of measurements and hole placement.

@MJADoingStuff

Жыл бұрын

Great idea 💡 I guess you can tell I was winging it 😂 thanks for checking out the video.😁👍🚜💨🍳

@twobears1224

Жыл бұрын

I'de buy a set of patterns.

great job documenting your build. It should help a ton of people out.

@MJADoingStuff

2 жыл бұрын

Thanks Jason👍 I am going to have to figure out how to get it on the computer so I can put it in the description to share it 😂 Thanks for checking out the video.😁👍🚜💨💡

Great. Now I'm thinking about bacon. I like the benchtop engineering. Relatively simple, but highly effective. Fantastic!

@MJADoingStuff

2 жыл бұрын

Thanks Logan 👍 Bacon 🥓 😋 now I just got to put the frying pan back and not get caught😂👍

I am glad that idea is going to serve your purpose! I like the fry pan reference... and how your wife approved for that! We would do anything for the quest of the perfect radius, don't we? Would you believe I use PowerPoint to sketch my implements? I've done so for many snowplows, dump trailer, and also my log grapple. Anytime where an actuator is being used, the distance between the pivot points VS stroke gets their importance. You sure know what I mean there! Thanks Mitch!

@MJADoingStuff

2 жыл бұрын

Thanks again for the idea Joe👍It is going to be way easier to grease it now. Yeah trying to figure out the best angles for the pivot points are always fun😁👍 thanks for checking out the video🚜💡💨

That log grapple is so cool. Do your ever think about getting a patent for it. You're builds are far better then some of the factory stuff I've seen. Thank you for sharing the build info on it. Take care and have a great weekend buddy. 👋

@MJADoingStuff

2 жыл бұрын

Thanks Kyle 👍 I got some ideas but going to take some time to get things set up 😉 Thanks for checking out the video you take care to😁👍🚜💨💡

@tractortalkwithgary1271

2 жыл бұрын

The build quality is amazing Mitch.

@MJADoingStuff

2 жыл бұрын

@@tractortalkwithgary1271 Thanks Gary 👍 I like making stuff😁 One day I will be making things for cash😂 Have a great weekend 😁👍🚜💨💡

Awesome. Thanks

@MJADoingStuff

2 жыл бұрын

😁👍🚜💨💡

Just an unbelievable build, looks great!!

@MJADoingStuff

2 жыл бұрын

Thanks 👍 glad you like it😁👍

@user-jp8ql2hy9q

Жыл бұрын

Hi

The key to the whole project? A Frying Pan! Lol thanks for the measurements!

@MJADoingStuff

2 жыл бұрын

Yep 👍 just don’t tell Jamie 😂👍 thanks for checking out the video

Man, I would love to build one of these…my fabrication skills are not quite at that level yet, but I’m working on it..:) thanks for the super cool build and the upload dude..:)

@MJADoingStuff

2 жыл бұрын

Anytime 👍 I think you can do it the hardest part is getting the right tools. Have a great weekend 😁👍🚜💨💡

real nice work and maybe someday I'll try one too thanks to you.

@MJADoingStuff

2 жыл бұрын

Thanks 👍 I hope by then I will figure out how to put drawings in the description😁Have a great weekend😁👍🚜💨💡

Perhaps one of the subscribers is skilled with Fusion360 or Solidworks, and could reproduce the design in one of those. They'd probably need to borrow the original to get some more detailed measurements, though. It would be pretty slick to be able to send out the design files to Big Blue Saw or run it on a CNC plasma table to get the metal work.

@MJADoingStuff

2 жыл бұрын

I am going to have to do something. Maybe have to invest in a CNC plasma table and learn how to program it. Thanks for the idea's I will have to look into that Fusion 360 thing😁Thanks for watching😁👍

thanks

@MJADoingStuff

2 жыл бұрын

Your welcome 😁👍🚜💨🍳

That slide square is called a bevel square. I'd love to have a set of your grapple drawings

@MJADoingStuff

Жыл бұрын

Thanks for the education on the bevel square😂👍 I don’t have any drawings yet I am working on purchasing a CNC plasma table and learning to use 360 fusion. Thanks for checking out the video. Have a great day. 😁👍🚜💨🍳

I wonder if I could make this at work for picking up pipe to drag from area to area. At the moment most of the workers use plate clamps and chain to drag the pipe around. I use my l3301 to drag plate/pipe/beams you name it around to where I need it.

@ruffnarbobnar5960

2 жыл бұрын

BTW subbed and like really cool brother, awesome work.

@MJADoingStuff

2 жыл бұрын

It would work but may need a double piloted check valve to make it safe. It seems to lose it’s grip when caring long distances. Thanks for checking out the video.😁👍🚜💨🍳

Do you have plans for this project for sale?

@MJADoingStuff

Жыл бұрын

Sorry not yet this was my first prototype and I think 🤔 it could use some changes first. Thanks for checking out the video 😁👍🚜💨🍳

OK gdje se može naručiti i cijena

Перевод нету