I didn’t even get an instructions manual so I used this! Thx!

@Zeuts85

4 жыл бұрын

Same.

@binasco3914

4 жыл бұрын

neither

@get2satnav

3 жыл бұрын

Same

@LilTwhy6871

3 жыл бұрын

Same

@Animeinspired22345

3 жыл бұрын

Me to

If your stuck at 12:51 try this Take the small screw and screw it in the small whole WITHOUT the plastic cover. This will thread the metal since it isn’t already threaded. Next unscrew it then re-screw it back on with the plastic cover

@Agreus-v7n

5 жыл бұрын

Legionnaire Stentorian thank you so much! Was stuck on it for like 30 minutes before finding this comment

@saberstreamz

5 жыл бұрын

Lol or just put the screw in on the driver Jam and twist LOL

@demetriixx9964

5 жыл бұрын

I can’t do it

@haroonamjad9189

5 жыл бұрын

Legionnaire Stentorian I’m still having trouble with this part

@rebornhd3767

4 жыл бұрын

I ended up managing with the plastic cover but I wish I saw this comment beforehand lol

you didnt show how to open the box i got stuck in it

@letsdotop1161

5 жыл бұрын

HAHA🤣😂😂 Be careful to open it right. Because if you don’t, you might go back in time😂😅

@dusitn_

4 жыл бұрын

guys help i hear german shouting i think i went back in time

@MagmaHQ

4 жыл бұрын

dusitn_ jerndimr dnkahbrka djfnkdb *IV BEEN STUCK IN 1385 FOR YEARS THIS WIULD HAVE BEEN NICE TO KNOW*

Thank you for taking the time to do this video. My chair came with instructions, well pictures, & I was doing ok but got stumped real quickly. I found your video & was able to finish it ,& it turned out just right! Thanks again!

Instructions unclear, accidentally assembled desk

@fandaianimations

3 жыл бұрын

Same :(

@GeorgeBonez

3 жыл бұрын

Mine turned out to be a pool table!

@lustsoul69

3 жыл бұрын

Oh no I did it again

@PsychoticProfessor_

3 жыл бұрын

Mine turned into a whole nightclub 😒

@zaydansiddiqui9532

Жыл бұрын

happens to the best of us

This chair was fairly easy to put together, the instructions were clear and I was about to follow along with no issues at all. It took me about 20 minutes to assemble. kzread.infoUgkx5hPALGI87E991DRmXev8PUFJGrrRcONS I did stuff the back of the chair with a pillow so it wouldn’t be so hollow after taking all the pieces out but that’s just a personal preference. I also added a pillow for lumbar support because although this is a great chair and is comfortable, it’s not necessarily the best if you’re sitting 10+ hrs a day wfh but in all honesty for the price, I didn’t mind at all. It looks great in my space and easily adjusts the height when needed.

As a gamer this may be the most active I’ve been in a while. Lmao jokes asside tho thanks for vid helped out a ton

i can’t stress enough how good an ASMR video this is lol

12:50 is a total lie in my book. It took me about an hour to get one tiny nail to screw and it wouldn't. Everything else was find except for that part. Looks like im not the only one either who had this issue. Bad design.

@kuraphobic

4 жыл бұрын

Stop complaining and get in the robot shinji

@Ariel_6.6

4 жыл бұрын

And that’s y u use a drill duhh

@B_bang22

3 жыл бұрын

You doing all that talking wasting valuable time when you could be getting in the fucking robot

@Jazzer5432111

3 жыл бұрын

😂😂😂done mine yesterday I know that feeling and even still it was another model to this 1

No instruction manual in my box.. fantastic video! Helped a ton

I got stuck at the part where you bought this, I think it might be because I have no money,

@MagmaHQ

4 жыл бұрын

Same

This video helped me so so much when the instructions confused the heck out of me. THANKS! Now my new chair is comfy and lookin sexy.

Thank you! Mine came without instructions, so this is a life saver.

@Teresa-kq5gn

3 жыл бұрын

Me here 1 year later bc I just got one for b-day lol pog chap

@spek3811

3 жыл бұрын

@@Teresa-kq5gn me here two months later because my old chair died lol pogchamp

@robloxandlife1996

Жыл бұрын

@@spek3811 me here 2 years later cause I got one for my birthday pog champ

Thank you. I wish my chair's manufacturer had provided instructions like you did.

Thanks man this was clutch as hell

thank you so much, mine came without assembly instructions and this is the only video i could find of a full assembly

Amazing video, my chair is fully installed thanks to you!

Awesome instructions, very easy! Thank you!

I spent hours assembling mine cuz they made it more complex since this video and a wack manual with no instructions was all I got. Thanks for the help, because without you I would have spent all night struggling.

In case anyone is wondering the Hex screwdriver head is a 3/16, a dedicated screwdriver will work a lot better than the cheap tool included

Thanks for that guide dood it really helped out

I didn’t even know how to put my chair together but when I came to your video it help so much thanks

I really want to appreciate how much you helped me build the chair I received the instructions wrong and I saw this vid it really helped me and thank you soo much

Thanks! This was so much more helpful than the instruction booklet.

Was so helpful thanks . This chair brought no instructions. Thanks for the video

thanks I really needed this I'm getting one soon and a lot of people are not getting a manual

Hello, help please. So my side adjusters don’t line up with the backrest when I try to put them together? I’ve tried to unscrew the side adjuster and find a spot where it can line up with the backrest but I’m not finding it?

Thank u so much for uploading this video,this helped me a lot

Thank you so much as this video was insanely helpful!!🙌🏽

Hey bro, I bought aleavic game chair with footrest, the manual was terrible, I am so lucky to find your video, it helped me assemble my chair thank you so much.

Thank you so much man I didn't even understand the book, lucky for me some screws we already in.

Great instructions! The only issue I had was there were no holes to screw three of plastic covers with. I didn't want to drive them through the leather so I had to leave the covers off.

@botep5529

Жыл бұрын

Has this issue as well, but the screws don't go into the leather, they attach just to the frame of the metal

Thank you very much, was really helpful :)

This video was VERY helpful. There were several steps/pictures that weren't 100% clear in the guide. This video is a great visual and my son loves his chair.

This worked out great for me thanks so much!!!

Excellent instructions. Thank you A+.

You're goated. Thanks very much

I Appreciate this video a lot I just moved and have been assembling things for 10 hour’s everything just started to look like lines after awhile 😂

Thanks man, now my gamer chair is completed

Does the wheel base secure to chair?? Mine just sits in and there is no securing hole for a screw, so when you pick chair up to move up or down stairs it comes apart...

Thanks I just got this chair and so fair it’s really comfortable

Awesome vid, thanks for the help!

Thank you so much I'm not the best at these stuff this really helped me out 😊

@Dkryptd

3 жыл бұрын

On which screws do you put the stoppers?

Absolute legend thank u so much🙌

THANK YOU VERY MUCH YOU'RE AWESOME KEEP UP THE GOOD WORK!!!!

Good job man just did mine watching your video

when i lean the top of the seat it’s crooked u might know why 🤔

Mine just came in the post but the problem is it came with too little bit of screws and the holes don’t a line with one another

Halfway through I found the manual but I felt like I owed it to this guy to watch the rest

My chair wont go up or down it doesnt look like the adjusting level is even touching anything and therefore couldnt possibly affect the chair's height. Any clues?

Still very nice of them to include a full video though. More companies should do this!

Thank u this helped me soooo much

Not a fan lumbar cushion straps. I like to simply remove and replace alternately during long sit sessions. Just reach back flip it aside and vise versa.

Great video with clear step by step instructions. Far concise than instruction manual. Hoping you will show how to install the foot rest.

I’m getting one for Christmas what will throw me off is when he puts the wheels in and arm rest and gas lever and screwes and more.

@Porkchopwad

5 жыл бұрын

Santa got me one already put together

struggled for about 30 mins to put the screw onto the vertical left cover for the hinges, wound up just grabbing a screw and screwdriver and got it done the cover moves around and is also difficult just getting the screw into the hole without the cover good chair besides that

Thank you so much!! It’s just way better watching the video.

My plastic cover for the gas thing keeps collapsing on itself and I don’t know what to do

Lmao this is uncut and it makes it so much easier to understand great vid!

@destiney1247

4 жыл бұрын

HOW THE FUCK DO YOU GET THE WHEELS ON

What about the lock washers you include in the kit

We didn't buy the exact same chair (except for the colour) but it helped us as the instructions were so small. We found that the screws that they told us to use in certain parts were not the right size screws at all, but we eventually worked it out. I'm now sitting on the chair at last. All I have to do now is work out how to attach the foot rest. I think we'll save that for another day!!!!

Wait i have a question that tool he was using to put the screws in that he kept twisting in does that come with the chair and the screws?

What are the sizes of the screws? Mine didn’t come with them

Do the adjusters have to go in a specific way cause my backrest won’t fit in between them

@javontaye.1209

5 жыл бұрын

plz don’t tell me I have to redo this😩

Why can't I figure out how to get these rings off the wheels so they will go all the way in :"( *edit* contacted support, the rings do not come off it just needs a little more force then I was using. If you can't make the force make the chair upright and use its weight plug you pushing down on the chair to get them inserted

@gratelis9681

4 жыл бұрын

Omg tysm i had the same problem

@e.a.b.k7048

3 жыл бұрын

Thank you! This was so helpful

@Fernt

3 жыл бұрын

Yep. Was afraid of forcing it and breaking it... Just takes a little more pressure than you would think

I accidentally put the panel upside down. Any tips to fix that?

you saved me, brother. thanks

I'm not able to change the height of the chair. The lever wont go up and if i try to move it up without it, the chair moves up but then it goes back down. Please help its a great chair 🙏🏽

@shadoechime3373

5 жыл бұрын

F1RE Jordan I have the same problem

I appreciate your help 🖤

how do you line up the holes on the backrest?

I skipped the steps when he dropped the tool is it safe?

I need to replace the cylinder, where can I order a replacement part? can you share a link where I can order one?

how can i tight the back part once assembled

Will this work for any gaming chair? My gaming chair is a Erommey Gaming chair from Walmart, will this assembly work for this video?

boi that’s some QUALITY asmr

My chair didn’t come with the holes in the seat where he is screwing at 8:07 and I don’t know if that is how it’s suppose to be or if it is a broken one and it would be really helpful if anyone could lmk what they think thanks.

@obamaninja_

4 жыл бұрын

RIOT Griffey maybe you out it on the wrong side?

When putting in arm rest I get 2big holes then the other are too small

So is this the "Expert assembly guy" who builds the chair for you for a $64.72 fee?

Does it come with the Allen wrench?

Is the arm rest supposed to move to the sides cause mine does that

The thing u put the telescope on. Mine is shorter then yours. Idk if im suppose to extend it but it wont budge.

Well Explained! Thanks for Sharing!

No washers for the first 4 screws on the bottom of the seat??????

Great tutorial. Thanks!

I didn’t realize you had to make some of the holes for some of the tiny screws.

I was w you bro for 30mins. Your screws were easy. The ones I got were tight asf

The b2 part broke i pulled on it before installation now what do i do

Thank u ☺️ appreciate it!

It won’t sit the seat it has to be fking lifted what do I do

why some chairs doesnt have the s racer logo? n the top

Were did you buy these chairs from

Nice video you earned a sub

So I got the white chair which was less expensive for whatever reason. I like it but the rocking function either doesn't work or the whole setup is just poorly made. It rocks whether I push in the bar or not, whether I tighten or untighten. Other than the rocking function, all seems fine. It is an improvement over what I was sitting in which was a crappy chair I found at the local dump.

I couldn’t get the back rest aligned properly

@Teresa-kq5gn

3 жыл бұрын

Pog champ

@trashymillie

3 жыл бұрын

mines wonky too 😔🤚

Thanks looks really easy

I’m stuck at 9:40, the bolt on the right side won’t go all the way in with the angle adjuster but if I take it off and try putting it in without it it fits

@ningw2287

Жыл бұрын

Same. How did you fix it man😢

Thank you so much . I didn't have to read the instructions.

the gaslift mine came with is too short, or it's just not all the way out, but no idea if it's possible to adjust it Is it supposed to be long enough after the box?

@Markinpuff

6 жыл бұрын

Andrew 77 press the button

@tfurnzo

5 жыл бұрын

Markinpuff I pressed down on it like really fucking hard and nothing happened

@XavierDabu

5 жыл бұрын

Thomuz FurnZ I’m having the same issue if u fixed it plz tell me how and what button is he talking about?

@kyliesites519

5 жыл бұрын

If it’s not working for you guys try putting it in the wheel part and step on it with ur shoe it should be enough pressure to make it pop up 😁

It took me 15 minutes to put it all together Thank you

@aliabdelaziz905

4 жыл бұрын

Fernando Troncoso me too i just did it lol

@aliabdelaziz905

4 жыл бұрын

The new one is a little easier though

It won't lean back I pull the leaver up and push back but it's stuck