good stuff. super nice truck . pro tip - i'd get a bung welded into that exhaust asap. get rid of that clamp. if it doesn't leak now, it will eventually. exhaust leaks on these systems are a pita. if you want some decent info on the holley systems or tuning on them, check out a few of my videos. off to watch part 2 now.
@ericrome7738
2 ай бұрын
I am now following you
@callofgeorge
2 ай бұрын
@@ericrome7738 thanks.
@Shantzonpoint4 ай бұрын
Really enjoyed this video. Hope the Sniper is still running strong for you. Love some of the mods you made to that old truck. Some great imagination and craftsmanship. Looking forward to see more of your work.
@leerindal8980Ай бұрын
Nice play on words . . . Drive Responsively (like being “responsive”) instead of Drive Responsibly (like being “responsible”) with a vehicle with probably at least 3x the horsepower the 50 Dodge came with (flat 6). I know, as I have one too. Nice truck and keep plugging away on it.
@sethdevries7415 ай бұрын
Keep the videos coming, I'm on one of the same FB groups as you and love your pickup. ( I don't care if it's Chevy powered, if my 318 dies I'm going with a 5.3 )
@Wrenchen-with-Darren3 ай бұрын
Nice truck, man. For real!!!👍
@wmw-hv5cx5 ай бұрын
Nice video, Look forward to watching your channel grow. I met you on the way to Lineville Ala show up by the QT. I wasn't in my vehicle. Dr. Orders couldn't travel with you all
@sweetdreamscustompaint81714 ай бұрын
Beautiful truck !
@kennethhudson80135 ай бұрын
Eric. Truck is the boss!
@ericmb793 ай бұрын
Great video! Your IAC looks like its to high. If you adjust the throttle screw to increase idle it should bring your iac down to where it should be. I think the spec is 0-10 and yours is in the 20s
@matthewrusch4775 ай бұрын
Love the truck!. I just bought a sniper 2 to install on my 1978 K5 Blazer. Getting ready to start installing it this weekend. I'm hoping Holley got all of the bugs worked out from the gen 1 units.
@ericrome7738
5 ай бұрын
They are pretty good. Just make sure that the engine doesn't have any other issues like bad wires, have your ground, positive and acc wires directly to the battery and dedicated ignition source that stay s hot when cranking and you should be good. My transmission had a vacuum leak which was the root of all my issues. Thx, Eric
@matthewrusch477
5 ай бұрын
Thanks for the tips. Truck runs pretty good on the carb, so hopefully I’m starting from a good spot. Got the fuel pump in the tank today. Hopefully I’ll get it competed next weekend.
@ericrome7738
5 ай бұрын
@matthewrusch477 great news! You will be impressed with the throttle response.
@bigbannana49495 ай бұрын
We have a dodge 318 tow truck it’s a tuff sounding. Beast
@mikefarrell23335 ай бұрын
Did you consider using the Holley PDM? That’s what I’ve gotten for my Sniper 2. But I'm having trouble with them coming on. Using ColdCase 14” fans, thinking they won't work with the new install. Can you possibly do a video showing how you connected? Very nice truck, by the way. Good video.
Пікірлер: 18
good stuff. super nice truck . pro tip - i'd get a bung welded into that exhaust asap. get rid of that clamp. if it doesn't leak now, it will eventually. exhaust leaks on these systems are a pita. if you want some decent info on the holley systems or tuning on them, check out a few of my videos. off to watch part 2 now.
@ericrome7738
2 ай бұрын
I am now following you
@callofgeorge
2 ай бұрын
@@ericrome7738 thanks.
Really enjoyed this video. Hope the Sniper is still running strong for you. Love some of the mods you made to that old truck. Some great imagination and craftsmanship. Looking forward to see more of your work.
Nice play on words . . . Drive Responsively (like being “responsive”) instead of Drive Responsibly (like being “responsible”) with a vehicle with probably at least 3x the horsepower the 50 Dodge came with (flat 6). I know, as I have one too. Nice truck and keep plugging away on it.
Keep the videos coming, I'm on one of the same FB groups as you and love your pickup. ( I don't care if it's Chevy powered, if my 318 dies I'm going with a 5.3 )
Nice truck, man. For real!!!👍
Nice video, Look forward to watching your channel grow. I met you on the way to Lineville Ala show up by the QT. I wasn't in my vehicle. Dr. Orders couldn't travel with you all
Beautiful truck !
Eric. Truck is the boss!
Great video! Your IAC looks like its to high. If you adjust the throttle screw to increase idle it should bring your iac down to where it should be. I think the spec is 0-10 and yours is in the 20s
Love the truck!. I just bought a sniper 2 to install on my 1978 K5 Blazer. Getting ready to start installing it this weekend. I'm hoping Holley got all of the bugs worked out from the gen 1 units.
@ericrome7738
5 ай бұрын
They are pretty good. Just make sure that the engine doesn't have any other issues like bad wires, have your ground, positive and acc wires directly to the battery and dedicated ignition source that stay s hot when cranking and you should be good. My transmission had a vacuum leak which was the root of all my issues. Thx, Eric
@matthewrusch477
5 ай бұрын
Thanks for the tips. Truck runs pretty good on the carb, so hopefully I’m starting from a good spot. Got the fuel pump in the tank today. Hopefully I’ll get it competed next weekend.
@ericrome7738
5 ай бұрын
@matthewrusch477 great news! You will be impressed with the throttle response.
We have a dodge 318 tow truck it’s a tuff sounding. Beast
Did you consider using the Holley PDM? That’s what I’ve gotten for my Sniper 2. But I'm having trouble with them coming on. Using ColdCase 14” fans, thinking they won't work with the new install. Can you possibly do a video showing how you connected? Very nice truck, by the way. Good video.
@ericrome7738
3 ай бұрын
Did you use relays on your fans?