Our shop and all around us have had none, I repeat, NONE of the new tbi fuel injection systems last or work at all. Not from any manufacturer at any price point. Our first recommendation to shit running cars is “take that damn efi off”

@UncleTonysGarage

Жыл бұрын

Ben, I'm going to pin this comment, because I think what you're saying holds true for many people, and I think this would be a good point of discussion.

@rustybritches6747

Жыл бұрын

I'm not a fan of the Holly EFI stuff but I can tell you when it first started getting big my buddy bought a holly sniper system hooked it all up and two of the injectors were dead right out of the box! they did send him a complete new setup with the handheld touch screen and everything they didn't just replace the injectors they sent him a whole new kit and he has had it on at least two different engines but I'm still not a fan even though driveability is great cold starts are great but it's just not for me! so carburetor all the way!

@rodparnell1953

Жыл бұрын

Well you've sold me. My 750 DP stays.

@sixtyfourchebby4507

Жыл бұрын

It's amazing how many people's projects sit after an efi failure. It was a lure to alot of people nearby because of the drastic elevation and temperature changes we experience. It was 54°C (129°) for over a week in my community in Canada and I drove carbureted vehicles everyday. No undrivability problems. And then 3 months later.... foots of snow and again no carburetor issues... maintenance is key. Take care from Quasi Mofo The Hunchback of Canaderp

@Freedom_is_better_than_safety

Жыл бұрын

I have to be honest here, making a blanket statement that there isn’t a good TBI aftermarket fuel injection system available now sounds like you’ve written them off without ever installing, tuning and maintaining them. Their early systems had a high failure rate, and the use of overseas sourced parts hasn’t made them flawless, but I’ve had a FITech and a Holley Sniper both perform very well over the last few years without issue. Are they the solution for everyone? No, there isn’t one way to do things. But to condemn the idea of adding EFI to an originally carbureted car as unreliable or too problematic simply isn’t true. Keeping an open mind and accepting that innovation happens doesn’t mean there’s no place for a mechanical carburetor any more than saying there’s no use for an older car now that we have airbags, ABS, and other important safety features. If you learn the systems and work on them they have their merits, as well as some drawbacks. But I will say they’ve kept more than a couple of my friends driving their classic cars because they don’t seem to need quite the same level of constant tuning as many old carburetors do. But maybe I’m just seeing it from one angle as well.

Thank you Edelbrock for continuing the carburetor tradition! 👍

@GregHuston

Жыл бұрын

@@jonathanlawson4667 more like reengineered and greatly improved upon.

@jonoh4883

Жыл бұрын

So did Quick Fuel......and no one is complaining

@GregHuston

Жыл бұрын

@@jonathanlawson4667 Holley BOUGHT QFT, just like they did with Barry Grant. QFT was offering a better version of the 4150 just like Edelbrock is doing.

@fwise20

Жыл бұрын

@@jonoh4883 , zf

Thanks for the shout out of my review of the new Edelbrock VRS 4150 carburetor. Cheers!

@pacbrian3809

Жыл бұрын

I watched it killer video man!

@Ecosse57

Жыл бұрын

great channel sir.

The 650cfm Edelbrock on my Mustang sat in my parents' garage, getting crapped and pissed in by rats, and clogged with rat nest material for seven years. When I finally gave up on the MSD Atomic EFI that I'd been running, I picked the Edelbrock up, dumped the rat debris out, sprayed it out with carb cleaner, bolted it onto the engine, primed it, and started it... and haven't touched an adjustment screw or anything else. It's the AK47 of carburetors, it doesn't care how it's been treated, it just works.

@Thumper68

9 күн бұрын

What? So many people struggle with them I see it’s ridiculous. In my opinion the Holley is kinda the ak47 of carbs. Really a new Quadrajet is the true ak47 of carbs becuase you can easily start vehicle with one of them on extreme sidehill or angle and others won’t.

my radio is electronic,my microwave,my tv,hell even my blood pressure monitor is electronic,to power my car down the road,with modules and sensors and tps switches,map maf NO THANK YOU,broke down in texas with modules out,sitting on the side of the road in 107 weather,keep it,everything i own is points and carb,so's my lawnmowers,old school is the SCHOOL

Very few car channels have the honest joy and emotion that Tony does when he gets in his bubble. When you get into what you are passionate about the rest of the world just disappears. Wish more people in the automotive industry got like this. Especially on camera. Thank you for what you do Tony and I look forward to your review on this new 4150 from Edelbrock.

@nathanwilliams8458

Жыл бұрын

Agreed. When the car went by outside and Tony had to stop and listen to it and say, "Wonder what they've got in theirs...", it was nothing short of charming. And I say that not in a quaint or patronizing way; it genuinely made me smile that it would so get his attention that he would stop to acknowledge and comment on it.

@JoseChavez-rr6og

Жыл бұрын

Yep

@leightonfarms4962

Жыл бұрын

Amen!

@silent1967

Жыл бұрын

You think Mrs. Uncle Tony gets lonely sometimes or is ok when Tony goes into his happy land zone ?

@Lagrange1186

Жыл бұрын

@@silent1967 if she’s anything like my car guy wife she is probably happy for the peace and quiet 😂

I just had someone yesterday tell me to get rid of my carb and go EFI.....I took great pleasure telling him I'm old school and will Keep my Q-jet thank you very much. 500 HP and 21.5 MPG @ 75 MPH with overdrive.

Vic was a classic guy! His contributions to hot rodding are huge! Im glad ive supported Edelbrock over the years.

Dude, I’ve been modifying Holley carbs for years. I saw that video about the new Edelbrock carb. I was blown away!!! I can’t wait to get my hands on one!! 😊

I’ve personally installed dozens of sniper units here in northern Va where the weather changes drastically all the time. Never ONCE have I encountered an issue. I’ve also corrected or fixed the install of at least 20 systems that other shops or “installers” did simply because they can’t read instructions or think they are smarter than Holley. I love when people want to blame the brand instead of the installers and I’m tired of dinosaurs shitting on tech they refuse to accept for childish reasons. My point is if it doesn’t perform to your expectations it’s not always the products fault. Most of the time it’s incorrect fuel supply or ststem install or tune files set up very far from correct. I also love carburetors and know they have a place and I’m thrilled to see them still growing and getting better. There’s a lot of people now that want an old school hot rod that can’t tune or have the time to play with jetting their carb every few weeks or want to be under the hood at all. They want to drive their car and enjoy it. That’s where the sniper is ideal. My customers that don’t mind an occasional jetting or squirter change can rock an HP 4150 and love it. Both have their place. Period. Don’t shit on things you don’t 100% understand because you don’t like progression.

FINALLY someone has clearly--- with actual carbs-- pointed out the differences between the two, and the limitations and strengths of them both! THANK YOU PROFESSOR! :)

@johnbnos944

3 ай бұрын

A holley carb is known as a plain tube carb eldebrock is a air valve carburetor. Holleys have a more dense charge below the throttle plate then edelbrock or carter's because there not pushing on a spring loaded door.

The first time I installed an Edelbrock 1406 on my old truck I never looked back. No leaks. Starts instantly in cold weather after sitting. Basically no adjustment needed, ran right out of the box just needed slight tweaking. It sat once for years and I rebuilt and cleaned it out without even removing it from the intake. Such a good, simple reliable carb. They just work.

@Santor-

Жыл бұрын

I would park my car in Sept/oct due to weather, then late april, no prep, startup instantly. A non leaking old carb can work just fine.

@cartermackenzie1135

4 ай бұрын

I bought a 1405 and a 1406 togeather on marketplace and I restored the 1405 and put an electric choke on it. The 1406 was in much worse condition so I did the 1405 first. I just need to put it on something now

The first Holley trick I learned from a couple of mechanics who had a shop I worked detailing next to all through high school and showed me how to make the secondaries work circa fall 1970. I had built my first hot engine a 273 and it had a 290 degree crower cam cam, TRW 10.5to 1's ,cyclone fenderwell headers a mallory dual point dist.and a D4RB edelbrock manifold with a holley 600. I had broken it in carefully and now wanted it to run now . Echevaria and Rodrigues ,the two mechanics smiled at each other and said "The sheet metal screw trick" One of them disappeared into the shop and came out and inserted a sheet metal screw in the secondary pull off slot that closes the secondaries .They were about ten years older than me,had set up my mallory dual point and told me they wanted to hear me get on my 63Valiant v100 coupe in all four gears on the expressway next to the shop or they would severely punish me (They were Chevy guys). I did and could not stop grinning for about a hour after. It ran bitchin compared to the 170 and 225 slants I had the previous year after getting my license. The sheet metal screw gets rid of the vacuum secondaries control and makes Them open NOW.

@tomparth3398

Жыл бұрын

I did that exact same thing years ago on a Holly 600 works like a charm.

@DohcJames

Жыл бұрын

Yeah but there is no second squirter on the vacuum secondary’s, it would be one hell of a lean bog there is no way that would perform good.

@cauzinkaos6219

4 ай бұрын

It works! They did the same thing at the track back then and today 😉

You know the world's in a bad State of Affairs when Holley quits making carburetors that's insane

@MaxNafeHorsemanship

Жыл бұрын

Doesn't hurt my feelings. I never liked Holley. I don't know if they are the same (my carb is 50 years old), but the Edelbrock looks just like the Carter AFB that was my fav.

@MrPiimpslap

Жыл бұрын

They didnt stop producing carbs. They just stopped trying to improve upon them.

@clydebethatway7485

Жыл бұрын

Myself never had good luck with Holly carbs would work good in the driveway or flat but if you want uphill downhill they would start to flood over or just float over whenever they felt like it Eldo Brock by far much simpler easier all-around bed better design

@ChadReynoldsGarage

Жыл бұрын

They aren't stopping making carbs. There are more models of performance carburetors available from Holley and other manufacturers than ever in history. Tony is just falling into the click bait trap.

Competition sometimes is a good thing for the consumer. Be interesting to see if Holley will come up with anything new. We definitely don't need companies trying to phase out carburetors. Hopefully some would step up in place on the market.

@cammontreuil7509

Жыл бұрын

It's corporate. Always thinking about the buck.

@gearbender427

Жыл бұрын

It's a problem when a mega giant corporation has bought and owns all the competitors.

@Anarchy-Is-Liberty

Жыл бұрын

There's lots of great carb companies out there, and plenty of carbs, they aren't going anywhere soon!

@AZOffRoadster

Жыл бұрын

@@Anarchy-Is-Liberty If there's no profit, there's no carburetors. it's all about volume, and how much people are willing to pay.

@sunnyray7819

Жыл бұрын

I agree with everything you guys said so far..Glad we have a lot of like minds on this channel here!

A short time ago I tried hard for over a week to talk to a human being at Holley over the phone, never could never did and gave up...at least you got to talk to someone.

@1320quick

Жыл бұрын

Past two times I called Holley, I spent over an hour each time on hold before someone picked up. And on one of the calls, they put me on hold for another 25 minutes to find the part number of the block plate for a scatter shield that I needed.

@glennnickerson8438

Жыл бұрын

I Am Not A Robot 🤖...

@MG-hg8cu

Жыл бұрын

Holly bought out Brothers truck shop in Corona. Now there is no more store pick up for parts. They have to ship everything. More $$$$$ for them = bad service

I'll get a lot of flack for this but I'd like to see you go through a quadrajet in depth.

As exciting as this new carburetor innovation is... you really piqued my interest when you mentioned being a mechanical fuel injection nerd. Can we expect some related content sometime soon? Please? As a Corvette nut I've always been fascinated with Chevy's mechanical fuelies from '57 to '65.

@ohnoitisnt

Жыл бұрын

Yes please to this sort of content. Also fuel systems on the nitro motors which are their own cool beast

I'm actually astounded that Holley would make this move. Not everybody is doing fuel injection or LS swaps. Sidenote - I hope people are saving up those old school engines from all those LS swaps because years down the road, everyone is going to want to go back to old school for nostalgia.

@lilpoindexter

Жыл бұрын

efi engines are ugly

@Bloodcurling

Жыл бұрын

No. LS/LT engines are a baseline 100hp above Gen1s

@tannerwysong2256

Жыл бұрын

@@Bloodcurling so...? Go watch Billy’s s10 at the channel named “src” and tell me small blocks are dead. 1500hp twin turbo 406. WITH a carburetor. And he gaps fools. Any type of motor platform can be made to make any type of power.

@davelowets

Жыл бұрын

@@johnvegar9098 No... It's all about the boost these days. You wont get 1500h.p. out of an old small block, and have it street driveable, no matter what heads and cam are on it without boost.

@nocturnal0072

Жыл бұрын

Blueprint engines is making new heads and blocks for Ford, Chevrolet and I think Mopar too.

About 15 years ago I was putting my #1850 on my rebuilt engine and I broke an ear off the baseplate. Went and bought a 600 Edelbrock and used that. It had lean stumbles and just plain ran poorly. Took the truck to the local hot rod shop. Put it on the Dyno and spent a day trying to tune that carb. Never did get it perfect. We were down to hand sanding the metering rods to try to get it to work. Did the best we could. I drove it a few weeks untill I found a used baseplate for my Holley so I put that carb back on. Went back to the chassis Dyno and the unmodified Holley with a used baseplate put out 60 more HP and 90 ft lbs more than the Edelbrock. That sold me on Holley's.

Word of the day: "Dynonerd" someone who is into adjustments beyond needs. Thanks Tony!!!! Love it.

The new Edelbrock 4150 looks AMAZING. 2 thumbs up to Edelbrock for keeping carbs alive and moving them forward into 2022!!!!! 👍👍👍👍👍👍

@saleenmav

Жыл бұрын

Other companies have been making Holley carbs for years and will continue to do so. Edelbrock isn’t doing anything but admitting that their own product sucks, hence the need to build someone else’s.

You can tell Tony's motivation isn't financial gain. He sincerely wants to share information. This man deserves to be listened to because the guys I know who have his kind of knowledge they are reluctant to share because most people don't listen.

@mattjessup8376

Жыл бұрын

You can tell that Tony is all about cars. Towards the end of the video he heard a souped up car go by. He smiled and said, ”I wonder what they got on theirs?” This guy’s great 👍

@jeremiahfiek5495

Жыл бұрын

PEOPLE DONT LISTEN!! Story of my life

@siliconvalleyengineer5875

8 ай бұрын

bullshit

I recently purchased two different Holley's. The first was a Slayer 600 and the second was a 4150 Demon which used to be the Barry Grant deal. Engine runs @180°F with 1/2" heat insulator under carb. Both would boil the fuel out of the accelerator pump circuit leaving it dry when you needed it. Both would pour fuel from the secondary throttle shafts and leave puddles of fuel on the intake manifold. Both required heavy throttle for hot starting due to fuel percolating into the engine. Both went back to Summit and I put on an AVS2. Tony is right, the thing just works. I purchased an 800 AVS2 to see if it would run any better than the 650 and it really didn't. The 800 fooled you because it felt quicker because the primary barrels are a lot bigger but overall, 800 was not worth keeping so I sold it. I recently installed a basic but Blueprinted 600 cfm AFB Performer and it works even better than the 650 AVS2. Go figure! I am quite convinced the silly red annular boosters on the AVS2 are marketing hype.

@bobbywalter5320

8 ай бұрын

if you are over 450 hp....it is choking power. if you are satisfied with how it is doing...then i would just say... let er ride

Amen ! I had a 650 Edelbrock on my 68 stang coupe,and tried it on a 78 Vette…put the 600 on my Stang,sold the Vette and accidentally left the 650 on the Vette. Big difference in performance in the Stang…..Now I’m 79 and to old to work on cars.I left the Stang to my son- in- law..302 c.I bored .40 over,289 HiPro heads,Energizer cam,electronic ignition,headers,sub frame connectors,3:58 Soft Detroit locker rear,double roller timing chain ,functional side pipes plus a bunch of other stuff .Then I got prostate cancer and that ended my hot roding.Don’t put off your dreams.Find a way to make them reality.Old age ain’t for sissies….😄

I always went with this, if I wanted all out performance I run a Holley, if I want reliability/street-ability Edelbrock. Glad Tony seems to agree:-)

@alrui

Жыл бұрын

@@MrSwinger1 Who said anyone "has to":-) I was please his thought pattern aligned with what I've always gone by is all.

I wish Edelbrock would do this kind of revamp with a Quadrajet style carburetor so us GM guys can have this level of tuneability and still keep our cable-modulated overdrive transmissions and that spreadbore performance.

@alertgasper

3 ай бұрын

I suspect you know that Edelbrock did have a replacement Q jet, 1901-1906. no surprise, Carter still is in charge of making them.

I recently came across your channel and I absolutely love and agree with everything you say. Back in the early 80s I’ve put a Holley carburetor on a Chevy Chevelle 307 engine that I modified and had nothing but problems with it. I was constantly tuning it and dialing it just so it would run. I currently have an Edelbrock on a 73 Ford bronco 302 engine that’s so far has worked spotlessly no problems whatsoever. Really like the inside to provide. One last thing you discussed how to adjust a gap on points and I’ve never used a dwell meter but used my dwell meter and it worked flawlessly. Thanks so much

It drives me crazy how companies quit making great products. It happens so much in areas other than automotive. Last I checked, I couldn't even buy galvanized window screen, everything is easy to rip nylon. Then there are companies who win top honors in a product test. What do they do? Instead of using the test to increase sales, they immediately drop or change the product!!

@Face2theScr33n

Жыл бұрын

Check out 2020 screen, or "pet resistant" screens. Very hard to tear. Also, they are fiberglass, not nylon. Some screens even keep out no-see-ums. These are reasons why screening exists as a profession. Good luck! Edit to add, the galvanized screen is very difficult to roll into the frame with the vinyl spline. Nylon/fiberglass took over for a few reasons.

@debluetailfly

Жыл бұрын

@@Face2theScr33n I meant to say fiberglass instead of nylon. Will have to check out the pet resistant. I have an old house and wish to continue with wooden screen frames. I don't need any rollers or splines, just some tacks. I remember people thinning some black oil paint and recoating the screens after the galvanizing wore off. Also they could be patched with a scrap of screen if something did make a small hole. I have made a couple of frames with some fiberglass screen that blocks more sunlight than regular fiberglass screen. That does help on the south side.

@zmanphx

Жыл бұрын

To stay in business you have to sell enough of product x based on demand.

@shaunclifton5281

Жыл бұрын

We were just talking about this with Lays Biscuit and Gravy Potato chips. They Won the taste test competition, were flying off the shelves, stores couldn't keep them....but they're now discontinued. What the hell ? I have seen so many products that sold great just vanish.

@shaunclifton5281

Жыл бұрын

@@zmanphx That's just it, so many high demand top sellers just vanish.

I love my carburetors. No wires. No computers. Works every time. I can fix it on the side of the road with a flat head and a 1\2in wrench.

Such AWESOME INFORMATIVE videos. Always enjoy your videos. Keep up your hard work on keeping the old iron alive.

Jay Leno had the head of Edelbrock on one of his shows. Leno asked what Edelbrocks biggest seller is and the answer was carburators. Which I thought was interesting since manufacturers have not used carbs since the 80's.

I have a 74 high boy ford with the factory 390. It had a factory 2 bbl holy, it wouldn’t start without playing with the carb for a hour so after seeing a article in hot rod mag, I bought a elderbrock 600 and a 4 bbl intake, slapped it together in 1996, adjusted the two front screws 1.5 turns out and idle screw and still to this day, barely bump the key ice cold (Washington) and she fires every time. I took it over Steven’s pass and Hangs the mountain 70+ half throttle last weekend. No probs bob

I want to try a set on Casper! Dominator vs VRS shootout on the Dyno and Track

from my first wcfb ( wilson carter four barrel) to my afb (aluminum four barrel) carter and then webber (edelbrock) the afb has been my choice for hundreds of custom engine builds, the easy jetting and progressive metering is the winning feature.

@donreinke5863

Жыл бұрын

Absolutely agree....Im NO fan of Holley and never have been. This month marks my 50th year in automotive repair.

@HansBelphegor

Жыл бұрын

I have a well used afb carter that still works

@donreinke5863

Жыл бұрын

@@HansBelphegor Ive had very few issues with them either the AFB or AVS. I just repaired an original (first year for the "modern" Holley 4 barrel) carb in a 1957 Thunderbird. Holleys early style needle and seat valves are prone to trouble/failure as well as the expected power valve issues. Had to go back in it again as the needle and seat were STILL acting up. Many Carter and Edelbrock carbs can be converted to dual feed simply by drilling and tapping the boss on the opposite fuel bowl

@MaxNafeHorsemanship

Жыл бұрын

I had an AFB on my SBC years ago (it replaced a Holley). I loved that thing. The most reliable carb I have ever see at any temp. Never missed a beat.

@wheels-n-tires1846

Жыл бұрын

Agree 100%!!!

Boy, it's clear, you are EXCITED about this! That's great! Just discovered you and learning a lot.

I was gonna try and let you know about that same vid you watched on this carb! I am for sure gonna buy one just to support their continued development and the fact they are embracing the carb people. There is at least 7 of us I swear!

Edelbrock 4 life and I’m definitely gonna buy one for my 302 in my Mustang 2

Great job. I'm an old guy and grew up with this stuff. I will occasionally take a carb apart to show a young gear-head how they work. Very few young people have ever dealt with a carb. I really enjoy your channel and CFM ratings have always been voodoo, at least in my experience.

@jeremyrawls5896

Жыл бұрын

I tried to show a young guy a carb and how it works he thought it was voodoo 🤣 Young wrenchers know very little

@falconater68

Жыл бұрын

@@jeremyrawls5896 They know very little because their parents either knew very little or couldn't be bothered.

@shaggydogg630

Жыл бұрын

Same here. Old pa-pah showing grandsons about carbs. Still a lot of things that use them.

@antbonyziemiak208

Жыл бұрын

Do high schools even offer auto shop in their curriculum anymore?

@gordocarbo

7 ай бұрын

@@antbonyziemiak208 Mine stopped in the early 80s

Phasing out carburetors?, this is lunacy!, they will have to pry them out of my cold dead hands!!

If they did it in the 90's or something and kinda "ripped the band-aid off" so to speak, it would've made sense. They're too deep into "keeping it alive" that now it's just confusing and upsetting

Ive had dozens of each carb and the Edelbrock/Carter based carbs are so much more reliable. But as you said, the Holley is for more in depth tuning, almost to a fault, higher power levels and people who like to tinker anytime their vehicle sits more than a couple months. I have the Edelbrock on my 62 C10 Pick up Project right now in fact, since it will be a 350 hp driver. Perfect.

I really hope Edelbrock cooks up a vacuum secondary version one day. Even on a daily driver, I’m a Holley guy through and through. I’d snap up a vacuum Eddy 4150 in an INSTANT!!

@dawnmclees

Жыл бұрын

Aren’t the vacuum ones 4160??

@calebkey2050

Жыл бұрын

@@dawnmclees Nope, a 4150 is just a carb that has a metering block on the secondaries, as opposed to a metering plate on a 4160. Both styles come in a very wide variety of flavors. The HolIey that I run on my car currently is a 600cfm vac. secondary 4150 If you look closely at the old crusty Holley “4150” Tony has in this vid, you’ll see it’s actually a 4160. It’s (most likely) a model 3310, and while many are 4150’s, most of them you’ll see are actually 4160’s

@CT_Taylor

Жыл бұрын

What cfm? I heard that Edelbrock had a vacuum secondary kind

@dawnmclees

Жыл бұрын

@@calebkey2050 Thanks man good to know..

@saleenmav

Жыл бұрын

FST makes a good 4150.

This is why we need the old timers, mad knowledge of a true muscle car guy and enthusiast

I put a FiTech on my 86 C20 with a 350. Never ran right. The shop that did the work was gone. FITech had no support for me for silly reason, even though I got it thru Summit Racing. After a year of NEVER running right. I was trying to change the settings one more time. It ran away. Full throttle, by the time I got it shut off with the key. Spun a bearing. So now I have a GM Performance New 350/357 with the Holley Street carb. Runs incredible !!! I have had some many people want to buy that FiTech. I said it’s broken, I’m not selling junk parts. Although there is one guy who is a pain, that I’m thinking he might be worthy !!!! No moe EFI’s for me !!!

I saw the MCS video, I find it amazing that a company put so much into designing a carburetor in 2022, And I had just about written Edelbrock off . Edelbrock AVS2 500 600 and 650 cfm all use the same size bodies only changing venturi's for different cfms

Loved this video. Some of us want to keep using carburetors for our cars and this give some hope.

That’s exciting news!! Learned a lot very quickly thanks Tony! I thought I heard Edelbrock was going out a couple years ago. Must of changed hands..

I watched the Muscle Car Solutions video. Great channel!

Carb For Life!👍

It's depressing to hear that holley is thinking about killing their carbs. It makes me happy to know that people are still innovating

I was a Holley guy until within the past couple of years due to the fact that I'm replacing power valves at least once a year due to ethanol. I never dealt with the Carter/Edelbrock until just recently and will not look back. I was impressed with the design and ease of tuneability.

@Aceman597

5 ай бұрын

Thanks for the info. I have always used edelbrock and easy no issues. I got a car that came with a holly. Runs and drives but cant get on it. I will replace that power valve before it gets an edelbrock.

You should see my modified 1850. I was reshaping the main body, and filling it with a bunch of epoxy. This new carb, is what I was striving for. I can’t wait to get one!!

I've run the Edelbrock (Carter style) for years, in several vehicles. I always said they were great for daily drivers, I have both electric choke and manuel/ cable choke models, both work fine. I also added a spring loaded neeedle seat kit ($12?) for my off road truck to help with sloshing issues. If I had a need for one, I'd buy one of these new carbs for sure!

This is awesome! I’ve owned both Holley and Edelbrock. Both are iconic brands, but most of my old trucks are/were daily driven or weekend cruisers and I agree, Edelbrock is just the best for that kind of operation. I’m a former diesel technician but have minimal experience with carbs but I can setup and rebuild an Edelbrock with ease. My last carburetor I had on my Chevy K10 was an Edelbrock 1408 and according to Edelbrock it was from 1992 and it just went bad! 30 years! I replaced it with the 1406 for a mild 350. I’ve daily driven Edelbrocks for years and through winters and never had to touch them, so easy to setup once you take the time to learn. Very disappointing to hear about Holley going away from carburetors, I’ve owned around 20 vehicles and I’ve had more issues with throttle bodies and EFI than any carburetor I’ve owned. Again, former diesel technician, big killer for those engines are injectors and injection pumps. I’ll gladly stick with the old school and reliable carburetors! Good stuff @uncleTonysgarage keep it up!

Just stopping by to let you know how much I enjoy you sharing your wisdom with us. Getting giddy over carburetors or the tuning of... well, anything for that matter is something I can get with. I really appreciate you taking the time to do these videos.

The best carburator I ever used was the Carter AVS that came OEM on my '69 Dodge Super bee. Most stable carb I ever used. Set it & forget it. Adjustable: Replaceable jetting & metering rods, air valve spring... Tweak em to get them right, and the job is done. The Holleys we're supposed to be the ultimate, but that was only when they were working right - if you could keep them doing that. Maybe my Carter wasn't the "Ultimate". But my "Bee" would still lift the front tires off the tar - still stock.

Recently I refreshed my old Demon that I bought new !!! Put a new 360 in it and put an Edelbrock AVS2 650cfm on it. It runs great. About 350 hp so its more than enough for me, and it cruises great. With an 833 O/D tranny its better than it has been in 50 years. 👍

Edelbrock's AVS2 is pretty badass.

@406MenaceRacecar

Жыл бұрын

That's actually a vacuum sec carb though, could use it for street driving I guess

@Lowclef

Жыл бұрын

@@406MenaceRacecar I drive a 72 Duster with a big block around town. Never at a track so for my purposes it’s perfect.

@406MenaceRacecar

Жыл бұрын

@@Lowclef nice ride! Our good friend Rick has a 70 Dart 440, there's a video of it.

SIR TONY, Do you remember the " PREDATOR CARBS. " ? They were all the rage back in the 80's, my buddy had 1 on a VERY VERY TRICKED OUT CHEVY 400. They were hard to understand, they had cams & springs on them, people could not tune them correctly. My buddy did though & NOBODY COULD TOUCH HIM, EVEN BIG BLOCK CARS DRAG RACING. He had a 69 Camaro & after a run down the track you couldn't open the doors because of the body flex but he fixed that with uni-body connectors he made. Also cracked windshields were a problem in the beginning. THANKS, Henry from N.E. PA.

I would hope carburators arnt dead i just got into the world of tunning hollys i love how adjustable all these carbs are and how big of changes you can make with simple parts

I've ran both, I prefer Quadrajets, spread bore. All my Edlebrocks are sitting on the shelf. It's also little details like factory throttle linkage brackets, kickdown cable bracket, steel fuel line, etc..so much better than aftermarket trash.

Holley gave me the runaround about carburetor restoration and sending it in to their restoration shop. It all makes sense now.

Nice report. I've been experiencing an issue that had me scratching my head. After a 5 minute run, then a shut down, 10 minutes, and restart, flooding. I found a video that showed gasoline boiling at 170, surrounded by water. Well found my issue. I use 750 Holleys on my big block Fords. My boat has no issues- 150 deg. My F100 gained 1 quart of oil in 4 months. When I turn the engine off it raises temp around 190. Lower float level didn't seem to help, but a fiber spacer plate did. Arizona summer kind of brought it back. Seems like something is trying to move us to efi. I'm trying a 2brl to see if 1 fuel bowl means less fuel. 3 750's all did the same thing... Like you said, with a 350 cm holley, its like of like running my Edlebrock 600... but after 40 years I don't need to be running that hard. Thanks for the info.

It’s about time that the 4150 got the upgrades to make it become everything it should be. Look at all the issues of the old Holley; the warpage problems, the powervalve blowouts. The big cam idle probs, everything-All fixed!

Holley phasing out carbs is like GM phasing out v8s

I think they also put larger diameter throttle shafts and bronze bushings on the 4150. The separate throttle plate assembly is eliminated, preventing the possibility of the screws holding it in place from going into the motor. It's all one piece. Looks pretty good.

The new Edelbrock 4150 you described sounded an awful lot like the Speed Demon 850 I bought 20 years ago. It had all the features you talked about except the mount for the TPS. It may have had that, but I didn't need it or look for the mounting bosses. Anyway it sounds good. I have a 1413 Edelbrock 800 that I am just now getting started with on this 401 FE Ford build. Promaxx heads, Howards hydraulic roller, 10:1 DSS forged pistons. Building anything other that a SBC, BBC or SBF, you have to wait FOREVER for parts. I'm over a year into this build thanks to having to do it again because of a failed Comp Cams flat tappet cam and lifters. I'm in that club now. Thanks Tony, great video as always.

The biggest problem I have encountered with the Four barrel TBI style injection units is the type of intake it’s bolted to. The fuel injection unit tends to like a open plenum style intake. If using a dual plane intake the divider wall needs to be machined down. The engine masters did a episode on this . Check it out! Now I still use and tune carbs. I don’t know near as much about tuning them as efi. But I have mostly worked on efi .

@albertgaspar627

Жыл бұрын

thanks for making this point! it's quite important. one of the problems with aftermarket TBI is they try to be a single solution to many engine setups, and that's going to lead to issues.

The old Edelbrocks really rip if you put in the HP needle and seat and the performance accelerator pump, put a 4 hole spacer under the carb to really boost the signal, then use a velocity stack type air cleaner or one of those triangle Edelbrock air cleaners.

@flinch622

Жыл бұрын

I like the look of velocity stacks on some rides but... it's show. They can [in a few extreme cases] work against you at the top end: air bleeds find themselves referenced to something less than atmospheric pressure - depends on the carb and surface area of filters. Would I give up 500 rpm and 2hp on a street car? Yeah - wtf.

@jeffjohnon4223

Жыл бұрын

@@flinch622 I'm only talking about a regular Edelbrock carb, not anything with air bleeds. As far as a velocity stack, it doesn't have to be very high, like the triangle air cleaner, as long as the air comes in from the top and flows downhill into the carb. Saying that makes no difference is like saying head porting makes no difference. The speed of air coming into a carb is massive, directing it is essential, especially on a Edelbrock carb.

@pmotorsports8276

Жыл бұрын

Triangle air cleaner ?😋🤣😆😅😂 car/carb fire with first backfire. Pieces drop in carb when filter ages

@jeffjohnon4223

Жыл бұрын

@@pmotorsports8276 Ok the "Pro Flo" air cleaner. If your car is backfiring through the carb you are not ready for a air cleaner yet, as far as pieces falling into the motor with age, hmm,do you leave your air cleaner on for decades until it desolves? Yeah those guys at Edelbrock don't know anything about what air cleaners work on the carbs they make.

He's Soo jazzed about this, lol it's fun to watch. Awesome content!

Im a manager at one of the parts chains, and we get the sniper units back for defects, along with FItech not so often but still, ive been thinking of making a carburetor like the old predator style variable carbs, my first experience with one was on a mopar 318 that made roughly 330hp or so and was fun seeimg how it worked

Carb vs Efi showdown begins... I need to build a track car with a carb and kick some ass!

I have never seen tony this exited before. I love it 🥰

This is very good information. Thanks for explaining the new Edelbrock carbs.

I just love how excited you are about this!

Great video and info UncleTony, I have 1 of those Carter/AFB Carbs, on my old 318 Poly with the front sit screw. Its 1 of the best long lasting carbs I have ever owned. They are tough as a hammer just like you put it.

But but but There was never a sweeter sound than the sound made when a pair of Rochester secondary's flipped open . Who is going to recreate that?

I personally gave up on holley between the jet change,power valve matching and the different pump cams. I run Edelbrock carburetors. But I did like my 650cfm double pumper holley on my 302 with a lunati 351w camshaft it was a 11 second car. You're old school like I am. Enjoy your show. I had a friend who had a mercury with a junk variable venturi on his 302 it wouldn't climb a hill put a I believe it was a thermoquad or something of that nature I found in a junkyard off a retired police car and that could would scoot, so carburetors are interesting. Do love the quadrajet when the secondaries open that sound means power to me on my old 6.6 403 olds.

Thanks Edelbrock for finally getting it. I used the old Edelbrock carb for street use and had to change to Holley at the strip. Now it’s all in one. Thank you

Holley phasing out carburetors? What next? Are they going to complain about their customer base being frat boys and then hire Dylan Mulvaney to advertise fuel injectors?

@RS-of1om

2 ай бұрын

hahaha good one

100% agreed. Ive swapped soooo many holleys for carters. No brainer for a street/show car.

@henrysmith8012

Жыл бұрын

Most dont really know how to tune a Holley.

This is Awesome... people with knowledge help the young . Keep our knowledge from being lost .

I have replaced many Holley's with Ann eldebrock, or a Carter afb. I normally maintain, or gain, ow end power. With slight loss at the top end. I do it for every reason he stated.

End of friendship! Hahahaha Discontinuing carburetors?! That sounds like part of the new world plan.

@yangionet8116

Жыл бұрын

Agenda 2030

@1982MCI

10 ай бұрын

Good thing we have great carburetor companies out here that are much better than Holley & Edelbrock are in the first place.

Never had Edelbrock, yet hear good things about them. Our '1985 Dodge B350 one ton van has the Rochester Quadrajet and works great. Cold start, one pump and three seconds of ignition and boom! Just wait 30 seconds for the oil and fluids to pump around and good to go. Warm/hot starts are immediately starts. Fuel lines close to engine have heat shields around to protect some from vapor lock. So no reason for EFI for us. Only thing we don't like much is the mechanical fuel pump. Any suggestions? Loooking into the Facet Cube 4-7 psi electrical fuel pump, just don't see any good mounting spot near and low at the fuel tank.

Hopefully summit keeps producing their holley 4010 copy. I really like it for a mild daily driver. Annular boosters, top plate gasket for no leaks and all holley interchangeable parts. They have been my go to for years and have only had one fail when the shafts wallered the body out and started leaking no matter what I did. Excited to see 4150s continue to be modernized though

I’ve got a 1964 El Camino with the Edelbrock a VS style carburetor on the original 283 engine. It’s a great set up.

Thanks for your advise Common sense is not common anymore 😂 It’s good to hear someone talk plainly that knows what they are talking about

I’ve noticed the last few years that carbs for small gas engines have actually gotten cheap compared to everything else in the world. Between all my chainsaws and lawnmowers and 4 wheelers I’ve probably got a dozen or more small engines with carbs. I normally just order up a carb kit when something starts giving me trouble but lately as I search around I can find complete whole brand new ready to go carbs for very little more than the cost of a rebuild kit. It’s like they’re just trying to get rid of them all.

@DanEBoyd

Жыл бұрын

And how about those modern plastic carburetors? I've done a B-string rebuild on a few of them now, but was surprised at the first one I came acrossed. You can still get a car battery for less than $60 at Walmart! Today I got a new group 35 for $57! They had a better one for $149, but I've had good luck with their cheap batteries. My previous one lasted six years! O'Reillys wanted like $200 minimum I believe.

@whatyoumakeofit6635

Жыл бұрын

if you want to support the Chinese knockoff market. they rip off other companies and reproduce their products with inferior materials and sell them for less. no thanks. I'd pay 4 times as much before I'd send any more of my mo ey to China, purposely.

@ludditeneaderthal

Жыл бұрын

2 syllables... chi-na... lol

The enthusiasm makes me want to learn more carbs are the best from what I'm seeing so much less to go wrong

Not everybody is going to want to spend thousands of dollars, run a bunch of wires and tinker with a fuel injection system. Especially if you are already comfortable with carbs and were running one before. Accountants end up running so many of these companies, often into the ground.

I had an edelbrock on a chevy 350 pickup truck, so reliable. It amazed how boring and simple it was. My daily driver slant 6 had a Holley 390. So much tinkering. I liked both but for different reasons. Mechanical carbs are just cheaper and simpler in the end. EFI everything doesn't always make sense, but when it comes to today's fuels it can really gum them up when you don't drive them daily. I've had to fix so many scooter and motorcycle carbs just because the fuel in the carbs messed them up. When it comes to Fuel injection it's great but it has it's place. doesn't mean it should go everywhere.

I removed the factory throttle body injection form my 1990 Suburban. Replaced it with an Edelbrock 1906 carburetor. MUCH better acceleration and driveability with no loss of miles per gallon. I did change the metering rods to slightly smaller diameter ones.

@DanEBoyd

Жыл бұрын

Did you also go to HEI? What are you doing for ignition advance?

@zmanphx

Жыл бұрын

The fuel is introduced at the same location on the manifold with TBI as is a carburetor.

@robjones8733

Жыл бұрын

Thinking about doing the same on my 89 silvy, tbi is not working well for me.

Thx UT for another good watch

What a pleasure it is to hear your no bulls**t explanations, thank you!!

The AFB comp carbs were way better then the early Edelbrock carbs, we did the switch on 2 drag cars that had comp series AFBs and both went about 3 tenths slower, and jetting didn't help, the newer ones seemed better.

Love a good carb. No need for any efi products for me

This is Awsome. Best of both worlds and keeping it simple. Thanks Uncle Tony

Yeah I watched that same video really cool stuff Hopefully I'll be able to get my hands on one in the future Love the videos keep up the good work Tony