Just met him this weekend at beat the creek he's a awesome guy an everyone that was at the event best time ever

Man that was just impressive. Looking forward too seeing what the future of this Monster and the awesome builds you and others will have too show.

I'm so glad I just watched this video! I have a team Corelli punisher which runs hobbywing rebranded motors and ESC and I've had problems lately with my trigger on my remote and I couldn't figure out how to calibrate the ESC and now you showed me thank you so much

Man you wasted no time getting this done! Looks like a solid performer, certainly has me looking forward to the 12s video, thanks for sharing

Thanks to you buddy I just pre-ordered mine today for my Losi 5T I love how smooth that system is looking forward to it when it comes in

@dualtrondreamteam6811

4 ай бұрын

Any issues with the max4 1 yr on

Your commentary and general excitement is contagious! Love it!

@ExocagedRC

Жыл бұрын

Glad you enjoy it!

Insane! 😱 I can't believe the motor actually fit without more modifications. Pretty crazy performance 👍

Motor design is out of this world

I wanted more I will get more. Love the attitude and the optimism you’re one of my favorites!

@nadersedaghat5694

2 жыл бұрын

Good luck on the warranty.

Awesome! Couldn't wait to see this motor/esc combo in a big rc! You didn't say anything about it being sensored, but that first slow, smooth, non-cogging pull was butter.

Holy hell Joe!!!! That is bad ass man!!!! Don't know how I missed this video, start my daily get ready for work routine watching your vids, 5am daily lol. Good stuff man!!!!

Glad to finally see you coving those jumps, going to save a lot of work on maintenance now 👊🏼 can’t wait to see the Max4 rip on 12s eventually 😎

I ran the motor/esc specs through three different calculators. If Hobbywing didn't inflate their numbers this combo should produce a 28hp @ 300 amps @ 50v. That would be wild, but here's where it gets crazy. If peak current is actually 2000 amps, @ 50v that's roughly 180hp, depending on efficiency. Mind-blowing. 🤯

@jeremybreeden4228

Жыл бұрын

That's more hp than my daily Honda Civic 😂

@BaNZFall

Жыл бұрын

@brainbah gotta use thicker ones

Spectacular a launch as I've seen!

Awesome video that combo is a Beast 🤩💪💪💪

nice vid man cannot wait to see the 12s run :)

Nice setup!

Man this video was awesome 👌 I really learned alot ,thanks man !!!

@ExocagedRC

Жыл бұрын

Glad you enjoyed it!

Awesome stuff Joe. Can't wait for castle to release a monster like that

Wowwwwww, love this DBXLE with the crazy big combo.

Man you had that thing flying!! i just set my dbxl up with a xlx2 combo. now you make me want to rip it all back out! lol awesome video Joe keep up the hard work. I always look forward for the daily uploads

@alphaplus4162

Жыл бұрын

Be careful it doesn't catch fire, i sold my xlx2 because of that fear.

Enjoyed your video, great information.

Bro the track looks awesome. I'd love to check it out. And that max4 combo😱😱😱😱. Awesome videos

*BEAST*

THAT IS INCREDIBLE !!! I need this combo for my 5ive T. I have the Max5 in it at 8S and its a beast with it but 12S will be a whole new experience

@old-rcplane-phart

2 жыл бұрын

Joe will go for a backflip, wfo, & the buggy will go into the multiverse! Lmao! 😜

I’m sure you know someone with a mill, just mill out the chassis for motor clearance so it looks nice & gives you what room you need. Probably better than raising the entire drivetrain. Can’t wait to see how fast it is on 12s, will be crazy fast!

Holy shyt! That motor and esc is HUGE!

That thing jumps like it’s tethered to the ground…. Stiffer springs help I guess but it seems like you need more suspension travel and a higher CST shock fluid. That nose dive made me cringe. Props to the losi for not taking a dirt nap after that. Nice video

What a MONSTER

Those looks perfect for the Raminator.

damn that thing rips! I have a xmaxx and a db pro so I can't see myself getting one of these but I'm a huge fan

Dude, that thing is sick!

Wow, you win the go big or go home challenge 😀

WoooW very nice amigo 🤟🏽😎🤟🏽

Awesome! As far as I know, the castle 800kv is rated for 12s. It would be interesting to see how the castle motor does on 12s in the real world. You would definitely get more rpms vs the 560kv.

I bought one and just realized i'll have to send it back because of the 600kv limit on 12S. oh well , guess i'll get an MGM. THANKS for the video.

@truthisweareallgonnadie.

6 ай бұрын

Explain what do you mean? I have a Losi dbxl-e 2.0 can you explain the problem? What are you trying to out it in? A MGM Esc and motor will cost as much as 3 combos of the hobbywing tho🤔

@eddieepicmedia

6 ай бұрын

hello there. That was a while ago. I ended up getting the Hobbywing Max4 with a castle 800kv. goto my channel and I show my setup.@@truthisweareallgonnadie.

That thing is so sick granted mine does not have as many upgrades as yours but that 12s combo, the money is burning a hole in my pocket!

Beautiful bud, pretty sure i saw 25t on that pinion but either way its a screamer....again love the channel

Yesyesyesyesuesyesyes please!!! I'm counting my money now, car payment or max4 for dbxle2🤔 I do need to start exercising anyway.🤫 dont tell the wife

You should take a torch and a shovel or something heat up the ends of the pipes and flatten them so you don’t smack them a full speed

That thing is awesome. Looks like the perfect upgrade for my 1/5th scale kraton lol.

Nice that’s going to be my next rc

Nice Frankenstein you built there 👍

Jesssusssss I can't even imagine what 12s is gonna do

Fingers crossed a updated version of the max5 and max6 get released after seeing this and seeing the new max8 that is now a 160amp esc

Definitely rethinking my xlx2 and 1100 kv setup i have now for 12s thanks bro wife's not.gonna be happy lol

I don't think you overgeared at all brother. More punch for sure and you could easily go 34 or 36 but dont think you need to. What a beast brother, I just can't imagine how much $$ you have in this rig, gotta be over 3k at this point. I live losi but there $$ a bit more. Appreciate ya

@stephanez8036

2 жыл бұрын

thank you ! at least someone understand low KV and ratios !

just discovered your channel and subbed great video dude.

@ExocagedRC

2 жыл бұрын

Thanks!

I could see the RC madness in your eyes ! And that shit eating grin 😁

I added the 18 tooth pinion to my dbxl. 1st the pinion was wearing, replaced motor mount with vitavon, fixed problem. Then I bought belted tires, they came unglued 3 out of 4 glued them back, fixed. Installed beast 2000 works great. Now stock esc is sending hot capacitors 5 green lights. Guess I need to spend another 500 bucks and get the xlx2 setup. The 18 tooth pinion is one expensive upgrade.

Awe hell nah 👍💯 already putting it to use

Man I got the max5 in my dbxle and the thing is a beast, I can't imagine with this.

Wow I love it🔥🔥👈🏾

What a beast ahaahhaaha, crazy powah!!1

I’m digging the 12s system I might have to get one for my xmaxx

Ahh i just noticed the Florida RC Outlet sticker. Those guys are great and one of the best shops ive been to.

@ExocagedRC

2 жыл бұрын

Yes they are!

It runs like a champion 👍. Any ideas if the drivetrain will keep up with 12s ?

Hey my friend can you please do a video on what u use to raise that transmission and how u did it I have one and I don't want to get rid of it thanks

Damn that is sweet!

This is the RC I want. I like the size.

Beast

I've been waiting for the install and running of this 👍💯👊

How big pinion will fit? I also have the Vitavon motor/center diff mount

Is there an esc that measures the pitch of the car in the air? Automatically apply power or brake to keep the car landing flat every time.

I have to have it so you think the eSC will fit in my outcast 8s not the motor I know will not but should be able to use esc

Too much power 🔋 💪 😍

You sound like an evil doctor with that laugh while updating the esc!

Mate that's a beast now. On 12s it's going to be a insane animal good luck mate 👍🤣🤣. I don't know about putting that in a X maxx it will fold it self in half 🦘🤣🤣🤣🤣🤣

Wow that's MAH HOOSIV😳 BIGASS beer can..

My steering servo on my dbxl went out to I can’t wait to run 12 s get that air control

I need this in my life

Have you tried cpu thermal paste to transfer heat better from the esc?

Great work man, I’m really interested in the motor mount that you used is there a particular link possibly to get one ?

Wowzers

That’s awesome with some decent fans on motor temps will be under 100 easy I’m guessing but that’s only on 8s so it’s not pushing it temps will go up when you run 12s get some fans on motor for when you run 12s great stuff brother keep it up

@garretm.9772

2 жыл бұрын

If he gears down a bit once he goes to 12s temps should stay low. He is pulling more amps only running 8s, not allowing the motor to rev out.

You should give the 5th scale hobbystar servo a try I've got one in my xmaxx and in my baja 5b and I really like it

O~my god!!! Metal dbxl~e 12s power

Do you recommend 1 million weight oil in the front differential with a center spool.

Cool👍🏻

Which one should I go for between X-maxx vs Losi 2.0 DBXLE? My requirement is should be fun and speedy and durable

It's a 25T pinion isn't it? Also, will the vitavon ESC mount acomodate the Max 4?

Whooaah, that's one huge freaking motor!! 😳..... Hmmmm, I could probably use that system for my kids power wheels 🤔😂

Would you recommend the 12s 800kv or 12s 560 Hobbywing with that weight I have a similar setup and I'm running an 1100kv castle creation on 8s SMC's that doesn't seem to have the proper power.

That makes the xlx2 look like a tenth scale motor 😂what a beast . Wonder if they will fit into the kraton/outcast 1/5th . Nice job .

@ExocagedRC

2 жыл бұрын

😂😂 I’m sure we will see these in the Kraton somehow

nice work Exo, thanks for sharing brother🤙🏽 Are you sure though that the pinion is 30t? it has 25t written on it... keen as to see what tyres will be able to handle the 12s!!

@PigglyWigglyDeluxe

2 жыл бұрын

Definitely 25t if you freeze frame and count the teeth you’ll count 25t

@grimripper7524

2 жыл бұрын

Who makes the 25t pinion gear for the DBXL-E?

@jamesplymire5342

Жыл бұрын

😆

Do you think the max4 will fit in the Kraton?

I Wanted more... I Will get more... Love'it 😂 💯

It’s awesome and I love seeing it mounted up but almost seems like a little too much motor for the dbxle. The 800kv 2028 with the max4 on 12s wold seem perfect

@jake4194

2 жыл бұрын

I think thats the point lol

@clairecooper3848

2 жыл бұрын

I believe the Max4 can only run motors up to 600kv .

@garretm.9772

2 жыл бұрын

@@clairecooper3848 that is if they are 70120 size, it should have no problem running an 800kv 56 size motor.

Hey love the vids you might want to consider the angel n demon shock springs out of the uk I have them on my dbxle 2.0 and I can drop it at chest high and no bottoming out

What kind of LVC's does it have? 6s, 8s, 12s, 10s?

Well done! Gosh that'd be a fun buggy to have I wish I had one. I love the bigger ESC and Motor, always! Is yours the most powerful in the world now? Jw lol

Good 👍

Exo what size hub extenders are you using on that bad boy?

8:50 my same reaction to the Max 4 release

I think I'm finally to the point where I'm going to get the max 4 and motor. I'm tired of the xlx2 and leopard motor overheating, just a short 10 min run will get things so hot you can't touch them. The gears are not binding because it roles freely. I have good fans on motor and esc. The only draw back is the price of getting the hobbywing kit and 6S batteries.

i wouldnt even put these in an rc tbh. i would replace the petrol engine in a sand buggy that can carry people direct drive 24s sensored with drag slicks on the rear would be a fun wheelsander

Temperature guns aren't accurate on reflective surface so be careful were pointing it might not be getting good reading but awesome video 👏

My ocd was triggered seeing you didn't use flanged nuts on your rear upper hinge pins lol edit: ps the vitavon battery trays are good

I hate to subscribe.....but you are such a lunatic...I had to :D You spend a lot of money to keep the channel busy. I thank you for that and subscribed now. And now - i watch that, for sure amazing, video :)

Great job. Seams it has a bit more room as we where talking with the vitavon chassis and motor mount then the stock chassis. Going to be a beast on 12s. Just ran my kraton8s on 12s this morning quick will be doing a video this weekend on it.

@lexsteel12

2 жыл бұрын

So, you can in fact fit that ESC and motor into a Kraton 8S? I was thinking of picking these max4 motor combo. But, how is the clearance for that motor? Did you have to mount it up? Thanks.

@lnskustoms6795

2 жыл бұрын

@@lexsteel12 I am running a 58113 Leppard motor and a beast pro 300a esc in the kraton 8s.

@phillymetalhead

2 жыл бұрын

@@lnskustoms6795 What Kv Leopard are you running?

@lnskustoms6795

2 жыл бұрын

@@phillymetalhead 530kv.

@phillymetalhead

2 жыл бұрын

@@lnskustoms6795 Thanks.