Hobart N50 Regrease Walkthrough pt. 2
Welcome to Mr. Mixer! We finished up disassembling the Hobart N50 in pt. 1 so now we're ready to get it regreased and put back it all back together. We hope this walkthrough helps!
Is your mixer in need of repair?
We Also accept shipments, more info on our website!
Mr. Mixer store: www.mrmixer.store/shipping
--------------------------------------------------------------------------------------------
Mr. Mixer store: www.mrmixer.store/
Facebook: / mrmixer316
TikTok: www.tiktok.com/@mr..mixer?is_...
Instagram: / mr._mixer_
0:00 Intro
0:21 Start regreasing
3:30 Regreasing center gear
4:40 Reattach transmission hub
4:45 Speed change lever
4:59 Remounting transmission
5:52 Tighten housing screws
6:46 Reinstall switch plate
7:40 Keep your screws separated
8:04 Test your knob
8:20 Reinstall back plate
9:15 Install back plate nuts
9:51 Reattach clips
10:28 Reinstall back cap
12:22 Testing the mixer
13:28 Testing the other mixer
14:12 Remove the drip ring
15:11 Remove planetary pin
15:59 Inspect planetary
17:16 Reinstall planetary
17:52 Reinstall planetary pin
18:51 Outro
Пікірлер: 8
Lovely! Couldn’t get a better video to watch for tonight! ❤
@MrMixer316
3 ай бұрын
I appreciate you ❤️
It's easier to take the coil out that is worth testing
Where did you get the grease? How many cans are required for the N50?
@MrMixer316
2 ай бұрын
We offer it on our website but we don't currently have a listing for the N50, send us an email and we can get you squared away mrmixer316@gmail.com
What fluid do you use in your parts washer?
Is the greasy of any particular type?
@MrMixer316
Ай бұрын
We use NSF H1 NLGI 2 Food Safe Grease, here's the link on our website (www.mrmixer.store/store-2den3/p/yhnwsrjcxcw0t2oaigs2ylh89p9pqi)