Lucid and elegant!!!!!! Thanks Sir

@ElectroGlobe1

8 ай бұрын

Thank you for the comment.

Thanks for sharing...very informative topic and well explained

@ElectroGlobe1

7 ай бұрын

Thank you for the comment

its really good information to understand Hipot testing

@ElectroGlobe1

10 ай бұрын

Thank you for the comment.

Super 👌 sir your explanation is very good

@ElectroGlobe1

10 ай бұрын

Thank you for the comment.

Very good information.

@ElectroGlobe1

11 ай бұрын

Thank you for the comment

Cuales son las valores maximos de corriente fuga o cual es el standard

Good job

@ElectroGlobe1

Ай бұрын

Thank you for the comment.

GREAT MY FRIEND

@chaudhrymujeebali7565

10 ай бұрын

You are doing well dear

But when you apply DC voltage to primary of transformer you will get 0 output so how can you apply voltage

@ElectroGlobe1

Жыл бұрын

Converters and inverters are used to transform AC into DC and vice a versa. At transformer ends only AC is applied. Transformer does not work on DC current.

Thanks. In my Hipot Kit for DC, In the diode how much oil should be there. In our case it is 50%. as there is a small hair line crack at the top of diode. is it recommended to test when the oil in diode is only 50%. What oil is used to top up. Thanks

@ElectroGlobe1

3 ай бұрын

Thank you for the comment. It is advisable to refer to the manufacturers manual.

Sir if you break it down to its components, How does your test transformer can produce up to 60KV of voltage from 230 volts. please explain.

@ElectroGlobe1

4 ай бұрын

By using Transformers.

Thanks for sharing this great experience. One question: How much the Hi-pot test results should differ between old and new cables? Regards

@ElectroGlobe1

8 ай бұрын

Thank you for the comment. Either old or new cable, the high pot results such as leakage currents, voltage withstand time, should be as per the standards.

@nerosmero1183

8 ай бұрын

@@ElectroGlobe1 what about the test voltage values?

@ElectroGlobe1

8 ай бұрын

@@nerosmero1183 In the video reference standards are mentioned for test voltage values.

Sir, at end+ 1700 I am not getting please explain

@ElectroGlobe1

11 ай бұрын

The Values are as per the standard.

Didn't shown leakage current during test How much leakage current?

@ElectroGlobe1

3 ай бұрын

Leakage current was around = 0.5 mAmp

@syedimam8261

3 ай бұрын

Thanks